| /Documentation/devicetree/bindings/clock/ |
| D | keystone-pll.txt | 1 Status: Unstable - ABI compatibility may be broken in the future
3 Binding for keystone PLLs. The main PLL IP typically has a multiplier,
4 a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
6 PLL is controlled by a PLL controller registers along with memory mapped
9 This binding uses the common clock binding[1].
11 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
14 - #clock-cells : from common clock binding; shall be set to 0.
15 - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
16 - clocks : parent clock phandle
17 - reg - pll control0 and pll multiplier registers
[all …]
|
| D | qca,ath79-pll.txt | 1 Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
6 - compatible: has to be "qca,<soctype>-pll" and one of the following
8 - "qca,ar7100-pll"
9 - "qca,ar7240-pll"
10 - "qca,ar9130-pll"
11 - "qca,ar9330-pll"
12 - "qca,ar9340-pll"
13 - "qca,qca9550-pll"
14 - reg: Base address and size of the controllers memory area
15 - clock-names: Name of the input clock, has to be "ref"
[all …]
|
| D | qcom,mmcc.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jeffrey Hugo <quic_jhugo@quicinc.com>
11 - Taniya Das <quic_tdas@quicinc.com>
20 - qcom,mmcc-apq8064
21 - qcom,mmcc-apq8084
22 - qcom,mmcc-msm8226
23 - qcom,mmcc-msm8660
24 - qcom,mmcc-msm8960
[all …]
|
| D | qoriq-clock.txt | 5 multiple phase locked loops (PLL) to create a variety of frequencies
14 --------------- -------------
18 1. Clock Block Binding
21 - compatible: Should contain a chip-specific clock block compatible
22 string and (if applicable) may contain a chassis-version clock
25 Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
26 * "fsl,p2041-clockgen"
27 * "fsl,p3041-clockgen"
28 * "fsl,p4080-clockgen"
29 * "fsl,p5020-clockgen"
[all …]
|
| D | vt8500.txt | 1 Device Tree Clock bindings for arch-vt8500
3 This binding uses the common clock binding[1].
5 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
8 - compatible : shall be one of the following:
9 "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
10 "wm,wm8650-pll-clock" - for a WM8650 PLL clock
11 "wm,wm8750-pll-clock" - for a WM8750 PLL clock
12 "wm,wm8850-pll-clock" - for a WM8850 PLL clock
13 "via,vt8500-device-clock" - for a VT/WM device clock
15 Required properties for PLL clocks:
[all …]
|
| D | snps,hsdk-pll-clock.txt | 1 Binding for the HSDK Generic PLL clock
3 This binding uses the common clock binding[1].
5 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
8 - compatible: should be "snps,hsdk-<name>-pll-clock"
9 "snps,hsdk-core-pll-clock"
10 "snps,hsdk-gp-pll-clock"
11 "snps,hsdk-hdmi-pll-clock"
12 - reg : should contain base register location and length.
13 - clocks: shall be the input parent clock phandle for the PLL.
14 - #clock-cells: from common clock binding; Should always be set to 0.
[all …]
|
| D | snps,pll-clock.txt | 1 Binding for the AXS10X Generic PLL clock
3 This binding uses the common clock binding[1].
5 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
8 - compatible: should be "snps,axs10x-<name>-pll-clock"
9 "snps,axs10x-arc-pll-clock"
10 "snps,axs10x-pgu-pll-clock"
11 - reg: should always contain 2 pairs address - length: first for PLL config
13 - clocks: shall be the input parent clock phandle for the PLL.
14 - #clock-cells: from common clock binding; Should always be set to 0.
17 input-clk: input-clk {
[all …]
|
| D | axs10x-i2s-pll-clock.txt | 1 Binding for the AXS10X I2S PLL clock
3 This binding uses the common clock binding[1].
5 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
8 - compatible: shall be "snps,axs10x-i2s-pll-clock"
9 - reg : address and length of the I2S PLL register set.
10 - clocks: shall be the input parent clock phandle for the PLL.
11 - #clock-cells: from common clock binding; Should always be set to 0.
15 compatible = "fixed-clock";
16 clock-frequency = <27000000>;
17 #clock-cells = <0>;
[all …]
|
| D | silabs,si5351.txt | 4 [1] Si5351A/B/C Data Sheet
5 https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
8 clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
10 generators can be found in [1].
15 - compatible: shall be one of the following:
16 "silabs,si5351a" - Si5351a, QFN20 package
17 "silabs,si5351a-msop" - Si5351a, MSOP10 package
18 "silabs,si5351b" - Si5351b, QFN20 package
19 "silabs,si5351c" - Si5351c, QFN20 package
20 - reg: i2c device address, shall be 0x60 or 0x61.
[all …]
|
| D | starfive,jh7110-pll.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: StarFive JH7110 PLL Clock Generator
11 Each PLL works in integer mode or fraction mode, with configuration
13 SYS-SYSCON node.
18 - Xingyu Wu <xingyu.wu@starfivetech.com>
22 const: starfive,jh7110-pll
25 maxItems: 1
[all …]
|
| D | xgene.txt | 1 Device Tree Clock bindings for APM X-Gene
3 This binding uses the common clock binding[1].
5 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
8 - compatible : shall be one of the following:
9 "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
10 "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
11 "apm,xgene-pmd-clock" - for a X-Gene PMD clock
12 "apm,xgene-device-clock" - for a X-Gene device clock
13 "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
14 "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
[all …]
|
| D | amlogic,a1-peripherals-clkc.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Neil Armstrong <neil.armstrong@linaro.org>
11 - Jerome Brunet <jbrunet@baylibre.com>
12 - Jian Hu <jian.hu@jian.hu.com>
13 - Dmitry Rokosov <ddrokosov@sberdevices.ru>
17 const: amlogic,a1-peripherals-clkc
19 '#clock-cells':
[all …]
|
| D | qcom,a53pll.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm A53 PLL clock
10 - Bjorn Andersson <andersson@kernel.org>
13 The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
14 frequencies above 1GHz.
19 - qcom,ipq5332-a53pll
20 - qcom,ipq6018-a53pll
21 - qcom,ipq8074-a53pll
[all …]
|
| D | baikal,bt1-ccu-pll.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Baikal-T1 Clock Control Unit PLL
11 - Serge Semin <fancer.lancer@gmail.com>
14 Clocks Control Unit is the core of Baikal-T1 SoC System Controller
18 IP-blocks or to groups of blocks (clock domains). The transformation is done
19 by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
21 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
[all …]
|
| D | dove-divider-clock.txt | 1 PLL divider based Dove clocks
3 Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
10 -------------
12 1 GPU clock
17 - compatible : shall be "marvell,dove-divider-clock"
18 - reg : shall be the register address of the Core PLL and Clock Divider
20 Core PLL and Clock Divider Control 1 register. Thus, it will have
22 - #clock-cells : from common clock binding; shall be set to 1
24 divider_clk: core-clock@64 {
25 compatible = "marvell,dove-divider-clock";
[all …]
|
| D | ti,cdce925.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Alexander Stein <alexander.stein@ew.tq-group.com>
15 - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
16 - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
17 - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
18 - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
23 - ti,cdce913
24 - ti,cdce925
[all …]
|
| D | moxa,moxart-clock.txt | 1 Device Tree Clock bindings for arch-moxart
3 This binding uses the common clock binding[1].
5 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
7 MOXA ART SoCs allow to determine PLL output and APB frequencies
11 PLL:
14 - compatible : Must be "moxa,moxart-pll-clock"
15 - #clock-cells : Should be 0
16 - reg : Should contain registers location and length
17 - clocks : Should contain phandle + clock-specifier for the parent clock
20 - clock-output-names : Should contain clock name
[all …]
|
| /Documentation/devicetree/bindings/sound/ |
| D | pcm512x.txt | 8 - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141" or
11 - reg : the I2C address of the device for I2C, the chip select
14 - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
19 - clocks : A clock specifier for the clock connected as SCLK. If this
20 is absent the device will be configured to clock from BCLK. If pll-in
21 and pll-out are specified in addition to a clock, the device is
24 - pll-in, pll-out : gpio pins used to connect the pll using <1>
26 given pll-in pin and PLL output on the given pll-out pin. An
27 external connection from the pll-out pin to the SCLK pin is assumed.
35 AVDD-supply = <®_3v3_analog>;
[all …]
|
| /Documentation/devicetree/bindings/usb/ |
| D | nvidia,tegra210-xusb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
18 const: nvidia,tegra210-xusb
22 - description: base and length of the xHCI host registers
23 - description: base and length of the XUSB FPCI registers
24 - description: base and length of the XUSB IPFS registers
[all …]
|
| D | nvidia,tegra124-xusb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
20 - description: NVIDIA Tegra124
21 const: nvidia,tegra124-xusb
23 - description: NVIDIA Tegra132
25 - const: nvidia,tegra132-xusb
[all …]
|
| D | nvidia,tegra186-xusb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
18 const: nvidia,tegra186-xusb
22 - description: base and length of the xHCI host registers
23 - description: base and length of the XUSB FPCI registers
25 reg-names:
[all …]
|
| D | nvidia,tegra194-xusb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
18 const: nvidia,tegra194-xusb
22 - description: base and length of the xHCI host registers
23 - description: base and length of the XUSB FPCI registers
25 reg-names:
[all …]
|
| /Documentation/devicetree/bindings/display/ |
| D | allwinner,sun4i-a10-hdmi.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
14 - Chen-Yu Tsai <wens@csie.org>
15 - Maxime Ripard <mripard@kernel.org>
20 - const: allwinner,sun4i-a10-hdmi
21 - const: allwinner,sun5i-a10s-hdmi
22 - const: allwinner,sun6i-a31-hdmi
23 - items:
[all …]
|
| /Documentation/devicetree/bindings/media/i2c/ |
| D | adv7343.txt | 3 The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP
4 package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite
5 (CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard
10 - compatible: Must be "adi,adv7343"
13 - adi,power-mode-sleep-mode: on enable the current consumption is reduced to
14 micro ampere level. All DACs and the internal PLL
16 - adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
17 internal PLL 1 circuit to be powered down and the
19 - ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6,
20 0 = OFF and 1 = ON, Default value when this
[all …]
|
| /Documentation/devicetree/bindings/clock/ti/davinci/ |
| D | pll.txt | 1 Binding for TI DaVinci PLL Controllers
3 The PLL provides clocks to most of the components on the SoC. In addition
4 to the PLL itself, this controller also contains bypasses, gates, dividers,
8 - compatible: shall be one of:
9 - "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
10 - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
11 - reg: physical base address and size of the controller's register area.
12 - clocks: phandles corresponding to the clock names
13 - clock-names: names of the clock sources - depends on compatible string
14 - for "ti,da850-pll0", shall be "clksrc", "extclksrc"
[all …]
|