| /Documentation/devicetree/bindings/mfd/ |
| D | as3711.txt | 28 - su2-feedback-curr-auto: automatic current feedback selection
36 If "su2-feedback-curr-auto" is selected, one or more of the following properties
38 - su2-auto-curr1 : use CURR1 input for current feedback
39 - su2-auto-curr2 : use CURR2 input for current feedback
40 - su2-auto-curr3 : use CURR3 input for current feedback
67 su2-feedback-curr-auto;
69 su2-auto-curr1;
70 su2-auto-curr2;
71 su2-auto-curr3;
|
| /Documentation/sphinx/ |
| D | parallel-wrapper.sh | 17 auto=$(perl -e 'open IN,"'"$sphinx"' --version 2>&1 |";
24 if [ -n "$auto" ] ; then
25 parallel="$auto"
|
| /Documentation/admin-guide/ |
| D | btmrvl.rst | 35 These commands are used to enable/disable auto sleep mode
39 1 -- Enable auto sleep mode
40 0 -- Disable auto sleep mode
44 # Enable auto sleep mode
48 # Disable auto sleep mode
84 This command displays current auto sleep status.
|
| D | parport.rst | 30 # insmod parport_pc io=0x3bc,0x378,0x278 irq=none,7,auto
34 auto-detected IRQ. Currently, PC-style (``parport_pc``), Sun ``bpp``,
49 options parport_pc io=0x378,0x278 irq=7,auto
51 modprobe will load ``parport_pc`` (with the options ``io=0x378,0x278 irq=7,auto``)
80 parport=0x3bc parport=0x378,7 parport=0x278,auto,nofifo
84 parport support entirely. Adding ``parport=auto`` to the kernel
86 it auto-detects.
233 ``lp=auto`` on the kernel command line, and lp will create devices
|
| /Documentation/networking/ |
| D | smc-sysctl.rst | 11 Setting SMC auto corking size:
12 SMC auto corking is like TCP auto corking from the application's
18 the under device in 1 single sending. If set to 0, the SMC auto corking
|
| D | ila.rst | 194 present using neutral-map-auto. In this case there is no C-bit, but the
252 "adj-transport", "neutral-map", and "neutral-map-auto". If neutral-map is
278 # Configure an ILA LWT route that uses auto checksum neutral mapping
282 csum-mode neutral-map-auto ident-type luid
290 csum-mode neutral-map-auto ident-type use-format
296 csum-mode neutral-map-auto ident-type use-format
|
| /Documentation/sound/cards/ |
| D | joystick.rst | 43 als4000 joystick_port 0 = disable (default), 1 = auto-detect,
46 azf3328 joystick 0 = disable, 1 = enable, -1 = auto (default)
48 ens1371 joystick_port 0 = disable (default), 1 = auto-detect,
50 cmipci joystick_port 0 = disable (default), 1 = auto-detect,
59 ymfpci joystick_port 0 = disable (default), 1 = auto-detect,
|
| /Documentation/ABI/obsolete/ |
| D | sysfs-bus-usb | 8 the device, either "on" or "auto".
12 be honored. "auto" means the device will autosuspend
16 During normal use, devices should be left in the "auto"
|
| /Documentation/sound/hd-audio/ |
| D | models.rst | 425 auto
426 auto-config reading BIOS (default)
491 auto
492 auto-config reading BIOS (default)
572 auto
587 auto
608 intel-mac-auto
632 auto
653 auto
676 auto
[all …]
|
| /Documentation/hwmon/ |
| D | max31760.rst | 43 Lookup table for auto fan control
72 pwm1_enable 1: direct fan control, 2: temperature based auto fan control
74 pwm1_auto_channels_temp Temperature source for auto fan control. 1: temp1, 2: temp2, 3: max…
76 pwm1_auto_point_temp_hyst Temperature hysteresis for auto fan control. Can be either 2000mC o…
|
| D | adm9240.rst | 106 - auto fan clock adjuster enabled for valid fan speed reading
116 - auto fan clock adjuster disabled
122 - auto fan clock adjuster enabled: adjusts fan_min
128 - auto fan clock adjuster enabled: adjusts fan_min
130 * fan speed may be displayed as zero until the auto fan clock divider
|
| /Documentation/devicetree/bindings/serial/ |
| D | milbeaut-uart.txt | 11 - auto-flow-control: flow control enable.
20 auto-flow-control;
|
| /Documentation/gpu/ |
| D | kms-properties.csv | 21 ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD
41 ,,"""Broadcast RGB""",ENUM,"{ “off”, “auto”, “on” }",Connector,TBD
83 ,Display,“dithering mode”,ENUM,"{ ""auto"", ""off"", ""on"" }",Connector,TBD
84 ,,“dithering depth”,ENUM,"{ ""auto"", ""off"", ""on"", ""static 2x2"", ""dynamic 2x2"", ""temporal"…
85 ,,“underscan”,ENUM,"{ ""auto"", ""6 bpc"", ""8 bpc"" }",Connector,TBD
96 ,Underscan,"""underscan""",ENUM,"{ ""off"", ""on"", ""auto"" }",Connector,TBD
99 ,Audio,“audio”,ENUM,"{ ""off"", ""on"", ""auto"" }",Connector,TBD
|
| /Documentation/devicetree/bindings/extcon/ |
| D | extcon-rt8973a.txt | 7 speed USB operation. Also, RT8973A support 'auto-configuration' mode.
8 If auto-configuration mode is enabled, RT8973A would control internal h/w patch
|
| /Documentation/ABI/testing/ |
| D | sysfs-class-power-twl4030 | 9 "auto" draw power as appropriate for detected
30 "auto" draw power as appropriate for detected
|
| D | configfs-usb-gadget-uac2 | 11 c_hs_bint capture bInterval for HS/SS (1-4: fixed, 0: auto)
26 p_hs_bint playback bInterval for HS/SS (1-4: fixed, 0: auto)
|
| D | sysfs-class-led-driver-aw200xx | 4 "auto", the dim will be calculated according to the
|
| /Documentation/userspace-api/netlink/ |
| D | intro-specs.rst | 57 auto-generated files which need to be updated. Using this tool is the easiest
58 way to generate / update auto-generated code.
93 prefix by ``ynl_``) and per-family auto-generated code (prefixed
97 struct (family structs are exported by the auto-generated code).
104 All the functions and types in this example come from the auto-generated
|
| /Documentation/networking/device_drivers/ethernet/intel/ |
| D | e1000.rst | 70 :Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
75 set to auto-negotiate, the board auto-detects the correct duplex. If the
249 :Default Value: 0 (auto-negotiate at all supported speeds)
253 partner is set to auto-negotiate, the board will auto-detect the correct
346 - The default operation is auto-negotiate. The board advertises all
348 common speed and duplex mode IF the link partner is set to auto-negotiate.
350 - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
351 is advertised (The 1000BaseT spec requires auto-negotiation.)
358 auto-negotiation process. It should be used when you wish to control which
359 speed and duplex combinations are advertised during the auto-negotiation
|
| /Documentation/devicetree/bindings/mmc/ |
| D | fsl-esdhc.txt | 34 - sdhci,auto-cmd12: specifies that a controller can only handle auto
|
| /Documentation/sphinx-static/ |
| D | custom.css | 16 overflow-y: auto; }
20 width: auto;
|
| /Documentation/tools/rtla/ |
| D | common_timerlat_aa.rst | 7 disable auto-analysis, reducing rtla timerlat cpu usage
|
| /Documentation/arch/x86/ |
| D | tsx_async_abort.rst | 57 Below tables indicate the impact of tsx=on|off|auto cmdline options on state of
91 3. "tsx=auto"
94 MSR_IA32_ARCH_CAPABILITIES bits Result with cmdline tsx=auto
|
| /Documentation/admin-guide/blockdev/ |
| D | paride.rst | 131 port parport name (or "auto" for all parports)
132 protocol protocol name (or "auto" for all protocols)
147 # echo auto >/sys/bus/pata_parport/new_device
155 # echo "parport0 auto" >/sys/bus/pata_parport/new_device
159 # echo "auto epat" >/sys/bus/pata_parport/new_device
|
| /Documentation/hid/ |
| D | hid-sensor.rst | 174 …es/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R
216 /sys/bus/platform/devices/HID-SENSOR-2000e1.6.auto/feature-0-200316$ grep -r . *
236 /dev$ tree | grep HID-SENSOR-2000e1.6.auto
237 │ │ │ ├── 10:53 -> ../HID-SENSOR-2000e1.6.auto
238 │ ├── HID-SENSOR-2000e1.6.auto
|