• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * ADIS16260/ADIS16265 Programmable Digital Gyroscope Sensor Driver
4  *
5  * Copyright 2010 Analog Devices Inc.
6  */
7 
8 #include <linux/device.h>
9 #include <linux/kernel.h>
10 #include <linux/spi/spi.h>
11 #include <linux/module.h>
12 
13 #include <linux/iio/iio.h>
14 #include <linux/iio/imu/adis.h>
15 
16 #define ADIS16260_STARTUP_DELAY	220 /* ms */
17 
18 #define ADIS16260_FLASH_CNT  0x00 /* Flash memory write count */
19 #define ADIS16260_SUPPLY_OUT 0x02 /* Power supply measurement */
20 #define ADIS16260_GYRO_OUT   0x04 /* X-axis gyroscope output */
21 #define ADIS16260_AUX_ADC    0x0A /* analog input channel measurement */
22 #define ADIS16260_TEMP_OUT   0x0C /* internal temperature measurement */
23 #define ADIS16260_ANGL_OUT   0x0E /* angle displacement */
24 #define ADIS16260_GYRO_OFF   0x14 /* Calibration, offset/bias adjustment */
25 #define ADIS16260_GYRO_SCALE 0x16 /* Calibration, scale adjustment */
26 #define ADIS16260_ALM_MAG1   0x20 /* Alarm 1 magnitude/polarity setting */
27 #define ADIS16260_ALM_MAG2   0x22 /* Alarm 2 magnitude/polarity setting */
28 #define ADIS16260_ALM_SMPL1  0x24 /* Alarm 1 dynamic rate of change setting */
29 #define ADIS16260_ALM_SMPL2  0x26 /* Alarm 2 dynamic rate of change setting */
30 #define ADIS16260_ALM_CTRL   0x28 /* Alarm control */
31 #define ADIS16260_AUX_DAC    0x30 /* Auxiliary DAC data */
32 #define ADIS16260_GPIO_CTRL  0x32 /* Control, digital I/O line */
33 #define ADIS16260_MSC_CTRL   0x34 /* Control, data ready, self-test settings */
34 #define ADIS16260_SMPL_PRD   0x36 /* Control, internal sample rate */
35 #define ADIS16260_SENS_AVG   0x38 /* Control, dynamic range, filtering */
36 #define ADIS16260_SLP_CNT    0x3A /* Control, sleep mode initiation */
37 #define ADIS16260_DIAG_STAT  0x3C /* Diagnostic, error flags */
38 #define ADIS16260_GLOB_CMD   0x3E /* Control, global commands */
39 #define ADIS16260_LOT_ID1    0x52 /* Lot Identification Code 1 */
40 #define ADIS16260_LOT_ID2    0x54 /* Lot Identification Code 2 */
41 #define ADIS16260_PROD_ID    0x56 /* Product identifier;
42 				   * convert to decimal = 16,265/16,260 */
43 #define ADIS16260_SERIAL_NUM 0x58 /* Serial number */
44 
45 #define ADIS16260_ERROR_ACTIVE			(1<<14)
46 #define ADIS16260_NEW_DATA			(1<<15)
47 
48 /* MSC_CTRL */
49 #define ADIS16260_MSC_CTRL_MEM_TEST		(1<<11)
50 /* Internal self-test enable */
51 #define ADIS16260_MSC_CTRL_INT_SELF_TEST	(1<<10)
52 #define ADIS16260_MSC_CTRL_NEG_SELF_TEST	(1<<9)
53 #define ADIS16260_MSC_CTRL_POS_SELF_TEST	(1<<8)
54 #define ADIS16260_MSC_CTRL_DATA_RDY_EN		(1<<2)
55 #define ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH	(1<<1)
56 #define ADIS16260_MSC_CTRL_DATA_RDY_DIO2	(1<<0)
57 
58 /* SMPL_PRD */
59 /* Time base (tB): 0 = 1.953 ms, 1 = 60.54 ms */
60 #define ADIS16260_SMPL_PRD_TIME_BASE	(1<<7)
61 #define ADIS16260_SMPL_PRD_DIV_MASK	0x7F
62 
63 /* SLP_CNT */
64 #define ADIS16260_SLP_CNT_POWER_OFF     0x80
65 
66 /* DIAG_STAT */
67 #define ADIS16260_DIAG_STAT_ALARM2	(1<<9)
68 #define ADIS16260_DIAG_STAT_ALARM1	(1<<8)
69 #define ADIS16260_DIAG_STAT_FLASH_CHK_BIT	6
70 #define ADIS16260_DIAG_STAT_SELF_TEST_BIT	5
71 #define ADIS16260_DIAG_STAT_OVERFLOW_BIT	4
72 #define ADIS16260_DIAG_STAT_SPI_FAIL_BIT	3
73 #define ADIS16260_DIAG_STAT_FLASH_UPT_BIT	2
74 #define ADIS16260_DIAG_STAT_POWER_HIGH_BIT	1
75 #define ADIS16260_DIAG_STAT_POWER_LOW_BIT	0
76 
77 /* GLOB_CMD */
78 #define ADIS16260_GLOB_CMD_SW_RESET	(1<<7)
79 #define ADIS16260_GLOB_CMD_FLASH_UPD	(1<<3)
80 #define ADIS16260_GLOB_CMD_DAC_LATCH	(1<<2)
81 #define ADIS16260_GLOB_CMD_FAC_CALIB	(1<<1)
82 #define ADIS16260_GLOB_CMD_AUTO_NULL	(1<<0)
83 
84 #define ADIS16260_SPI_SLOW	(u32)(300 * 1000)
85 #define ADIS16260_SPI_BURST	(u32)(1000 * 1000)
86 #define ADIS16260_SPI_FAST	(u32)(2000 * 1000)
87 
88 /* At the moment triggers are only used for ring buffer
89  * filling. This may change!
90  */
91 
92 #define ADIS16260_SCAN_GYRO	0
93 #define ADIS16260_SCAN_SUPPLY	1
94 #define ADIS16260_SCAN_AUX_ADC	2
95 #define ADIS16260_SCAN_TEMP	3
96 #define ADIS16260_SCAN_ANGL	4
97 
98 struct adis16260_chip_info {
99 	unsigned int gyro_max_val;
100 	unsigned int gyro_max_scale;
101 	const struct iio_chan_spec *channels;
102 	unsigned int num_channels;
103 };
104 
105 struct adis16260 {
106 	const struct adis16260_chip_info *info;
107 
108 	struct adis adis;
109 };
110 
111 enum adis16260_type {
112 	ADIS16251,
113 	ADIS16260,
114 	ADIS16266,
115 };
116 
117 static const struct iio_chan_spec adis16260_channels[] = {
118 	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
119 		BIT(IIO_CHAN_INFO_CALIBBIAS) |
120 		BIT(IIO_CHAN_INFO_CALIBSCALE),
121 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
122 	ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0,
123 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
124 	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
125 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
126 	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
127 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
128 	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
129 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
130 	IIO_CHAN_SOFT_TIMESTAMP(5),
131 };
132 
133 static const struct iio_chan_spec adis16266_channels[] = {
134 	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
135 		BIT(IIO_CHAN_INFO_CALIBBIAS) |
136 		BIT(IIO_CHAN_INFO_CALIBSCALE),
137 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
138 	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
139 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
140 	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
141 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
142 	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
143 		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
144 	IIO_CHAN_SOFT_TIMESTAMP(4),
145 };
146 
147 static const struct adis16260_chip_info adis16260_chip_info_table[] = {
148 	[ADIS16251] = {
149 		.gyro_max_scale = 80,
150 		.gyro_max_val = IIO_RAD_TO_DEGREE(4368),
151 		.channels = adis16260_channels,
152 		.num_channels = ARRAY_SIZE(adis16260_channels),
153 	},
154 	[ADIS16260] = {
155 		.gyro_max_scale = 320,
156 		.gyro_max_val = IIO_RAD_TO_DEGREE(4368),
157 		.channels = adis16260_channels,
158 		.num_channels = ARRAY_SIZE(adis16260_channels),
159 	},
160 	[ADIS16266] = {
161 		.gyro_max_scale = 14000,
162 		.gyro_max_val = IIO_RAD_TO_DEGREE(3357),
163 		.channels = adis16266_channels,
164 		.num_channels = ARRAY_SIZE(adis16266_channels),
165 	},
166 };
167 
168 /* Power down the device */
adis16260_stop_device(struct iio_dev * indio_dev)169 static int adis16260_stop_device(struct iio_dev *indio_dev)
170 {
171 	struct adis16260 *adis16260 = iio_priv(indio_dev);
172 	int ret;
173 	u16 val = ADIS16260_SLP_CNT_POWER_OFF;
174 
175 	ret = adis_write_reg_16(&adis16260->adis, ADIS16260_SLP_CNT, val);
176 	if (ret)
177 		dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT");
178 
179 	return ret;
180 }
181 
182 static const u8 adis16260_addresses[][2] = {
183 	[ADIS16260_SCAN_GYRO] = { ADIS16260_GYRO_OFF, ADIS16260_GYRO_SCALE },
184 };
185 
adis16260_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)186 static int adis16260_read_raw(struct iio_dev *indio_dev,
187 			      struct iio_chan_spec const *chan,
188 			      int *val, int *val2,
189 			      long mask)
190 {
191 	struct adis16260 *adis16260 = iio_priv(indio_dev);
192 	const struct adis16260_chip_info *info = adis16260->info;
193 	struct adis *adis = &adis16260->adis;
194 	int ret;
195 	u8 addr;
196 	s16 val16;
197 
198 	switch (mask) {
199 	case IIO_CHAN_INFO_RAW:
200 		return adis_single_conversion(indio_dev, chan,
201 				ADIS16260_ERROR_ACTIVE, val);
202 	case IIO_CHAN_INFO_SCALE:
203 		switch (chan->type) {
204 		case IIO_ANGL_VEL:
205 			*val = info->gyro_max_scale;
206 			*val2 = info->gyro_max_val;
207 			return IIO_VAL_FRACTIONAL;
208 		case IIO_INCLI:
209 			*val = 0;
210 			*val2 = IIO_DEGREE_TO_RAD(36630);
211 			return IIO_VAL_INT_PLUS_MICRO;
212 		case IIO_VOLTAGE:
213 			if (chan->channel == 0) {
214 				*val = 1;
215 				*val2 = 831500; /* 1.8315 mV */
216 			} else {
217 				*val = 0;
218 				*val2 = 610500; /* 610.5 uV */
219 			}
220 			return IIO_VAL_INT_PLUS_MICRO;
221 		case IIO_TEMP:
222 			*val = 145;
223 			*val2 = 300000; /* 0.1453 C */
224 			return IIO_VAL_INT_PLUS_MICRO;
225 		default:
226 			return -EINVAL;
227 		}
228 	case IIO_CHAN_INFO_OFFSET:
229 		*val = 250000 / 1453; /* 25 C = 0x00 */
230 		return IIO_VAL_INT;
231 	case IIO_CHAN_INFO_CALIBBIAS:
232 		addr = adis16260_addresses[chan->scan_index][0];
233 		ret = adis_read_reg_16(adis, addr, &val16);
234 		if (ret)
235 			return ret;
236 
237 		*val = sign_extend32(val16, 11);
238 		return IIO_VAL_INT;
239 	case IIO_CHAN_INFO_CALIBSCALE:
240 		addr = adis16260_addresses[chan->scan_index][1];
241 		ret = adis_read_reg_16(adis, addr, &val16);
242 		if (ret)
243 			return ret;
244 
245 		*val = val16;
246 		return IIO_VAL_INT;
247 	case IIO_CHAN_INFO_SAMP_FREQ:
248 		ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &val16);
249 		if (ret)
250 			return ret;
251 
252 		if (spi_get_device_id(adis->spi)->driver_data)
253 		/* If an adis16251 */
254 			*val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ?
255 				8 : 256;
256 		else
257 			*val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ?
258 				66 : 2048;
259 		*val /= (val16 & ADIS16260_SMPL_PRD_DIV_MASK) + 1;
260 		return IIO_VAL_INT;
261 	}
262 	return -EINVAL;
263 }
264 
adis16260_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long mask)265 static int adis16260_write_raw(struct iio_dev *indio_dev,
266 			       struct iio_chan_spec const *chan,
267 			       int val,
268 			       int val2,
269 			       long mask)
270 {
271 	struct adis16260 *adis16260 = iio_priv(indio_dev);
272 	struct adis *adis = &adis16260->adis;
273 	int ret;
274 	u8 addr;
275 	u8 t;
276 
277 	switch (mask) {
278 	case IIO_CHAN_INFO_CALIBBIAS:
279 		if (val < -2048 || val >= 2048)
280 			return -EINVAL;
281 
282 		addr = adis16260_addresses[chan->scan_index][0];
283 		return adis_write_reg_16(adis, addr, val);
284 	case IIO_CHAN_INFO_CALIBSCALE:
285 		if (val < 0 || val >= 4096)
286 			return -EINVAL;
287 
288 		addr = adis16260_addresses[chan->scan_index][1];
289 		return adis_write_reg_16(adis, addr, val);
290 	case IIO_CHAN_INFO_SAMP_FREQ:
291 		adis_dev_lock(adis);
292 		if (spi_get_device_id(adis->spi)->driver_data)
293 			t = 256 / val;
294 		else
295 			t = 2048 / val;
296 
297 		if (t > ADIS16260_SMPL_PRD_DIV_MASK)
298 			t = ADIS16260_SMPL_PRD_DIV_MASK;
299 		else if (t > 0)
300 			t--;
301 
302 		if (t >= 0x0A)
303 			adis->spi->max_speed_hz = ADIS16260_SPI_SLOW;
304 		else
305 			adis->spi->max_speed_hz = ADIS16260_SPI_FAST;
306 		ret = __adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t);
307 
308 		adis_dev_unlock(adis);
309 		return ret;
310 	}
311 	return -EINVAL;
312 }
313 
314 static const struct iio_info adis16260_info = {
315 	.read_raw = &adis16260_read_raw,
316 	.write_raw = &adis16260_write_raw,
317 	.update_scan_mode = adis_update_scan_mode,
318 };
319 
320 static const char * const adis1620_status_error_msgs[] = {
321 	[ADIS16260_DIAG_STAT_FLASH_CHK_BIT] = "Flash checksum error",
322 	[ADIS16260_DIAG_STAT_SELF_TEST_BIT] = "Self test error",
323 	[ADIS16260_DIAG_STAT_OVERFLOW_BIT] = "Sensor overrange",
324 	[ADIS16260_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
325 	[ADIS16260_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
326 	[ADIS16260_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 5.25",
327 	[ADIS16260_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 4.75",
328 };
329 
330 static const struct adis_timeout adis16260_timeouts = {
331 	.reset_ms = ADIS16260_STARTUP_DELAY,
332 	.sw_reset_ms = ADIS16260_STARTUP_DELAY,
333 	.self_test_ms = ADIS16260_STARTUP_DELAY,
334 };
335 
336 static const struct adis_data adis16260_data = {
337 	.write_delay = 30,
338 	.read_delay = 30,
339 	.msc_ctrl_reg = ADIS16260_MSC_CTRL,
340 	.glob_cmd_reg = ADIS16260_GLOB_CMD,
341 	.diag_stat_reg = ADIS16260_DIAG_STAT,
342 
343 	.self_test_mask = ADIS16260_MSC_CTRL_MEM_TEST,
344 	.self_test_reg = ADIS16260_MSC_CTRL,
345 	.timeouts = &adis16260_timeouts,
346 
347 	.status_error_msgs = adis1620_status_error_msgs,
348 	.status_error_mask = BIT(ADIS16260_DIAG_STAT_FLASH_CHK_BIT) |
349 		BIT(ADIS16260_DIAG_STAT_SELF_TEST_BIT) |
350 		BIT(ADIS16260_DIAG_STAT_OVERFLOW_BIT) |
351 		BIT(ADIS16260_DIAG_STAT_SPI_FAIL_BIT) |
352 		BIT(ADIS16260_DIAG_STAT_FLASH_UPT_BIT) |
353 		BIT(ADIS16260_DIAG_STAT_POWER_HIGH_BIT) |
354 		BIT(ADIS16260_DIAG_STAT_POWER_LOW_BIT),
355 };
356 
adis16260_stop(void * data)357 static void adis16260_stop(void *data)
358 {
359 	adis16260_stop_device(data);
360 }
361 
adis16260_probe(struct spi_device * spi)362 static int adis16260_probe(struct spi_device *spi)
363 {
364 	const struct spi_device_id *id;
365 	struct adis16260 *adis16260;
366 	struct iio_dev *indio_dev;
367 	int ret;
368 
369 	id = spi_get_device_id(spi);
370 	if (!id)
371 		return -ENODEV;
372 
373 	/* setup the industrialio driver allocated elements */
374 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adis16260));
375 	if (!indio_dev)
376 		return -ENOMEM;
377 	adis16260 = iio_priv(indio_dev);
378 	/* this is only used for removal purposes */
379 	spi_set_drvdata(spi, indio_dev);
380 
381 	adis16260->info = &adis16260_chip_info_table[id->driver_data];
382 
383 	indio_dev->name = id->name;
384 	indio_dev->info = &adis16260_info;
385 	indio_dev->channels = adis16260->info->channels;
386 	indio_dev->num_channels = adis16260->info->num_channels;
387 	indio_dev->modes = INDIO_DIRECT_MODE;
388 
389 	ret = adis_init(&adis16260->adis, indio_dev, spi, &adis16260_data);
390 	if (ret)
391 		return ret;
392 
393 	ret = devm_adis_setup_buffer_and_trigger(&adis16260->adis, indio_dev, NULL);
394 	if (ret)
395 		return ret;
396 
397 	/* Get the device into a sane initial state */
398 	ret = __adis_initial_startup(&adis16260->adis);
399 	if (ret)
400 		return ret;
401 
402 	ret = devm_add_action_or_reset(&spi->dev, adis16260_stop, indio_dev);
403 	if (ret)
404 		return ret;
405 
406 	return devm_iio_device_register(&spi->dev, indio_dev);
407 }
408 
409 /*
410  * These parts do not need to be differentiated until someone adds
411  * support for the on chip filtering.
412  */
413 static const struct spi_device_id adis16260_id[] = {
414 	{"adis16260", ADIS16260},
415 	{"adis16265", ADIS16260},
416 	{"adis16266", ADIS16266},
417 	{"adis16250", ADIS16260},
418 	{"adis16255", ADIS16260},
419 	{"adis16251", ADIS16251},
420 	{}
421 };
422 MODULE_DEVICE_TABLE(spi, adis16260_id);
423 
424 static struct spi_driver adis16260_driver = {
425 	.driver = {
426 		.name = "adis16260",
427 	},
428 	.probe = adis16260_probe,
429 	.id_table = adis16260_id,
430 };
431 module_spi_driver(adis16260_driver);
432 
433 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
434 MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor");
435 MODULE_LICENSE("GPL v2");
436 MODULE_IMPORT_NS(IIO_ADISLIB);
437