| /kernel/linux/linux-6.6/arch/arm/boot/dts/marvell/ |
| D | kirkwood-ts219.dtsi | 8 reg = <0x00000000 0x20000000>; 23 reg = <0x30>; 34 reg = <0x12100 0x100>; 40 m25p128@0 { 44 reg = <0>; 46 mode = <0>; 48 partition@0 { 49 reg = <0x00000000 0x00080000>; 54 reg = <0x00200000 0x00200000>; 59 reg = <0x00400000 0x00900000>; [all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | kirkwood-ts219.dtsi | 8 reg = <0x00000000 0x20000000>; 23 reg = <0x30>; 34 reg = <0x12100 0x100>; 40 m25p128@0 { 44 reg = <0>; 46 mode = <0>; 48 partition@0 { 49 reg = <0x00000000 0x00080000>; 54 reg = <0x00200000 0x00200000>; 59 reg = <0x00400000 0x00900000>; [all …]
|
| D | qcom-ipq4019.dtsi | 21 #address-cells = <0x1>; 22 #size-cells = <0x1>; 26 reg = <0x87e00000 0x080000>; 31 reg = <0x87e80000 0x180000>; 45 #size-cells = <0>; 46 cpu@0 { 53 reg = <0x0>; 55 clock-frequency = <0>; 67 reg = <0x1>; 69 clock-frequency = <0>; [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pinctrl/ |
| D | qcom,sm6125-tlmm.yaml | 73 - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" 113 reg = <0x00500000 0x400000>, 114 <0x00900000 0x400000>, 115 <0x00d00000 0x400000>; 119 gpio-ranges = <&tlmm 0 0 134>;
|
| /kernel/linux/linux-5.10/arch/arm/mach-s3c/ |
| D | bast.h | 16 #define BAST_CPLD_CTRL1_LRCOFF (0x00) 17 #define BAST_CPLD_CTRL1_LRCADC (0x01) 18 #define BAST_CPLD_CTRL1_LRCDAC (0x02) 19 #define BAST_CPLD_CTRL1_LRCARM (0x03) 20 #define BAST_CPLD_CTRL1_LRMASK (0x03) 24 #define BAST_CPLD_CTRL2_WNAND (0x04) 25 #define BAST_CPLD_CTLR2_IDERST (0x08) 29 #define BAST_CPLD_CTRL3_IDMASK (0x0e) 30 #define BAST_CPLD_CTRL3_ROMWEN (0x01) 34 #define BAST_CPLD_CTRL4_LLAT (0x01) [all …]
|
| /kernel/linux/linux-5.10/arch/arm/nwfpe/ |
| D | fpopcode.h | 18 |c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT 19 |c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2) 21 |c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO 22 |c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT 23 |c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons 45 P pre/post index bit: 0 = postindex, 1 = preindex 46 U up/down bit: 0 = stack grows down, 1 = stack grows up 48 L load/store bit: 0 = store, 1 = load 60 j dyadic/monadic bit: 0 = dyadic, 1 = monadic 69 | Single | 0 | 0 | x | 1 words | [all …]
|
| /kernel/linux/linux-6.6/arch/arm/nwfpe/ |
| D | fpopcode.h | 18 |c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT 19 |c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2) 21 |c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO 22 |c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT 23 |c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons 45 P pre/post index bit: 0 = postindex, 1 = preindex 46 U up/down bit: 0 = stack grows down, 1 = stack grows up 48 L load/store bit: 0 = store, 1 = load 60 j dyadic/monadic bit: 0 = dyadic, 1 = monadic 69 | Single | 0 | 0 | x | 1 words | [all …]
|
| /kernel/linux/linux-6.6/sound/soc/codecs/ |
| D | cs35l36.h | 16 #define CS35L36_FIRSTREG 0x00000000 17 #define CS35L36_LASTREG 0x00E037FC 18 #define CS35L36_SW_RESET 0x00000000 19 #define CS35L36_SW_REV 0x00000004 20 #define CS35L36_HW_REV 0x00000008 21 #define CS35L36_TESTKEY_CTRL 0x00000020 22 #define CS35L36_USERKEY_CTL 0x00000024 23 #define CS35L36_OTP_MEM30 0x00000478 24 #define CS35L36_OTP_CTRL1 0x00000500 25 #define CS35L36_OTP_CTRL2 0x00000504 [all …]
|
| /kernel/linux/linux-5.10/sound/soc/codecs/ |
| D | cs35l36.h | 16 #define CS35L36_FIRSTREG 0x00000000 17 #define CS35L36_LASTREG 0x00E037FC 18 #define CS35L36_SW_RESET 0x00000000 19 #define CS35L36_SW_REV 0x00000004 20 #define CS35L36_HW_REV 0x00000008 21 #define CS35L36_TESTKEY_CTRL 0x00000020 22 #define CS35L36_USERKEY_CTL 0x00000024 23 #define CS35L36_OTP_MEM30 0x00000478 24 #define CS35L36_OTP_CTRL1 0x00000500 25 #define CS35L36_OTP_CTRL2 0x00000504 [all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/pci/ |
| D | qcom,pcie.txt | 261 reg = <0x1b500000 0x1000 262 0x1b502000 0x80 263 0x1b600000 0x100 264 0x0ff00000 0x100000>; 267 linux,pci-domain = <0>; 268 bus-range = <0x00 0xff>; 272 ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ 273 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ 277 interrupt-map-mask = <0 0 0 0x7>; 278 interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ [all …]
|
| /kernel/linux/linux-6.6/arch/arm/net/ |
| D | bpf_jit_32.h | 12 #define ARM_R0 0 29 #define ARM_COND_EQ 0x0 /* == */ 30 #define ARM_COND_NE 0x1 /* != */ 31 #define ARM_COND_CS 0x2 /* unsigned >= */ 33 #define ARM_COND_CC 0x3 /* unsigned < */ 35 #define ARM_COND_MI 0x4 /* < 0 */ 36 #define ARM_COND_PL 0x5 /* >= 0 */ 37 #define ARM_COND_VS 0x6 /* Signed Overflow */ 38 #define ARM_COND_VC 0x7 /* No Signed Overflow */ 39 #define ARM_COND_HI 0x8 /* unsigned > */ [all …]
|
| /kernel/linux/linux-5.10/arch/arm/net/ |
| D | bpf_jit_32.h | 12 #define ARM_R0 0 29 #define ARM_COND_EQ 0x0 /* == */ 30 #define ARM_COND_NE 0x1 /* != */ 31 #define ARM_COND_CS 0x2 /* unsigned >= */ 33 #define ARM_COND_CC 0x3 /* unsigned < */ 35 #define ARM_COND_MI 0x4 /* < 0 */ 36 #define ARM_COND_PL 0x5 /* >= 0 */ 37 #define ARM_COND_VS 0x6 /* Signed Overflow */ 38 #define ARM_COND_VC 0x7 /* No Signed Overflow */ 39 #define ARM_COND_HI 0x8 /* unsigned > */ [all …]
|
| /kernel/linux/linux-5.10/arch/powerpc/boot/dts/ |
| D | bluestone.dts | 16 dcr-parent = <&{/cpus/cpu@0}>; 26 #size-cells = <0>; 28 cpu@0 { 31 reg = <0x00000000>; 32 clock-frequency = <0>; /* Filled in by U-Boot */ 33 timebase-frequency = <0>; /* Filled in by U-Boot */ 46 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ 52 cell-index = <0>; 53 dcr-reg = <0x0c0 0x009>; 54 #address-cells = <0>; [all …]
|
| /kernel/linux/linux-6.6/arch/powerpc/boot/dts/ |
| D | bluestone.dts | 16 dcr-parent = <&{/cpus/cpu@0}>; 26 #size-cells = <0>; 28 cpu@0 { 31 reg = <0x00000000>; 32 clock-frequency = <0>; /* Filled in by U-Boot */ 33 timebase-frequency = <0>; /* Filled in by U-Boot */ 46 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ 52 cell-index = <0>; 53 dcr-reg = <0x0c0 0x009>; 54 #address-cells = <0>; [all …]
|
| /kernel/linux/linux-5.10/include/linux/ |
| D | pe.h | 14 * Linux EFI stub v1.0 adds the following functionality: 19 * The recommended way of loading and starting v1.0 or later kernels is to use 23 * Versions older than v1.0 support initrd loading via the image load options 31 #define LINUX_EFISTUB_MAJOR_VERSION 0x1 32 #define LINUX_EFISTUB_MINOR_VERSION 0x0 34 #define MZ_MAGIC 0x5a4d /* "MZ" */ 36 #define PE_MAGIC 0x00004550 /* "PE\0\0" */ 37 #define PE_OPT_MAGIC_PE32 0x010b 38 #define PE_OPT_MAGIC_PE32_ROM 0x0107 39 #define PE_OPT_MAGIC_PE32PLUS 0x020b [all …]
|
| /kernel/linux/linux-6.6/drivers/scsi/ |
| D | 3w-xxxx.h | 62 [0x000] = "INFO: AEN queue empty", 63 [0x001] = "INFO: Soft reset occurred", 64 [0x002] = "ERROR: Unit degraded: Unit #", 65 [0x003] = "ERROR: Controller error", 66 [0x004] = "ERROR: Rebuild failed: Unit #", 67 [0x005] = "INFO: Rebuild complete: Unit #", 68 [0x006] = "ERROR: Incomplete unit detected: Unit #", 69 [0x007] = "INFO: Initialization complete: Unit #", 70 [0x008] = "WARNING: Unclean shutdown detected: Unit #", 71 [0x009] = "WARNING: ATA port timeout: Port #", [all …]
|
| /kernel/linux/linux-5.10/drivers/scsi/ |
| D | 3w-xxxx.h | 62 [0x000] = "INFO: AEN queue empty", 63 [0x001] = "INFO: Soft reset occurred", 64 [0x002] = "ERROR: Unit degraded: Unit #", 65 [0x003] = "ERROR: Controller error", 66 [0x004] = "ERROR: Rebuild failed: Unit #", 67 [0x005] = "INFO: Rebuild complete: Unit #", 68 [0x006] = "ERROR: Incomplete unit detected: Unit #", 69 [0x007] = "INFO: Initialization complete: Unit #", 70 [0x008] = "WARNING: Unclean shutdown detected: Unit #", 71 [0x009] = "WARNING: ATA port timeout: Port #", [all …]
|
| /kernel/linux/linux-6.6/include/linux/ |
| D | pe.h | 14 * Starting from version v3.0, the major version field should be interpreted as 16 * - 0x1: initrd loading from the LINUX_EFI_INITRD_MEDIA_GUID device path, 17 * - 0x2: initrd loading using the initrd= command line option, where the file 21 * The recommended way of loading and starting v1.0 or later kernels is to use 25 * Versions older than v1.0 may support initrd loading via the image load 29 * The minor version field must remain 0x0. 32 #define LINUX_EFISTUB_MAJOR_VERSION 0x3 33 #define LINUX_EFISTUB_MINOR_VERSION 0x0 36 * LINUX_PE_MAGIC appears at offset 0x38 into the MS-DOS header of EFI bootable 40 #define LINUX_PE_MAGIC 0x818223cd [all …]
|
| /kernel/linux/linux-6.6/arch/arm/mach-sa1100/ |
| D | jornada720.c | 43 #define TUCR_VAL 0x20000400 46 #define SA1111REGSTART 0x40000000 47 #define SA1111REGLEN 0x00002000 48 #define EPSONREGSTART 0x48000000 49 #define EPSONREGLEN 0x00100000 50 #define EPSONFBSTART 0x48200000 56 {0x0001,0x00}, // Miscellaneous Register 57 {0x01FC,0x00}, // Display Mode Register 58 {0x0004,0x00}, // General IO Pins Configuration Register 0 59 {0x0005,0x00}, // General IO Pins Configuration Register 1 [all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-sa1100/ |
| D | jornada720.c | 43 #define TUCR_VAL 0x20000400 46 #define SA1111REGSTART 0x40000000 47 #define SA1111REGLEN 0x00002000 48 #define EPSONREGSTART 0x48000000 49 #define EPSONREGLEN 0x00100000 50 #define EPSONFBSTART 0x48200000 56 {0x0001,0x00}, // Miscellaneous Register 57 {0x01FC,0x00}, // Display Mode Register 58 {0x0004,0x00}, // General IO Pins Configuration Register 0 59 {0x0005,0x00}, // General IO Pins Configuration Register 1 [all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/samsung/ |
| D | s5pv210.dtsi | 46 #size-cells = <0>; 48 cpu@0 { 51 reg = <0>; 55 xxti: oscillator-0 { 57 clock-frequency = <0>; 59 #clock-cells = <0>; 64 clock-frequency = <0>; 66 #clock-cells = <0>; 77 reg = <0xb0600000 0x2000>, 78 <0xb0000000 0x20000>, [all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/qcom/ |
| D | qcom-ipq4019.dtsi | 21 #address-cells = <0x1>; 22 #size-cells = <0x1>; 26 reg = <0x87e00000 0x080000>; 31 reg = <0x87e80000 0x180000>; 45 #size-cells = <0>; 46 cpu@0 { 53 reg = <0x0>; 55 clock-frequency = <0>; 67 reg = <0x1>; 69 clock-frequency = <0>; [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pci/ |
| D | qcom,pcie.yaml | 900 reg = <0x1b500000 0x1000>, 901 <0x1b502000 0x80>, 902 <0x1b600000 0x100>, 903 <0x0ff00000 0x100000>; 906 linux,pci-domain = <0>; 907 bus-range = <0x00 0xff>; 911 ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, 912 <0x82000000 0 0 0x08000000 0 0x07e00000>; 916 interrupt-map-mask = <0 0 0 0x7>; 917 interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, [all …]
|
| /kernel/linux/linux-6.6/crypto/ |
| D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|
| /kernel/linux/linux-5.10/crypto/ |
| D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|