| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/clock/ |
| D | renesas,emev2-smu.txt | 24 - #clock-cells: Should be <0>
35 - #clock-cells: Should be <0>
41 reg = <0x610 0>;
43 #clock-cells = <0>;
48 reg = <0x4a0 1>;
50 #clock-cells = <0>;
57 reg = <0xe1020000 0x38>;
58 interrupts = <0 8 0>;
70 reg = <0xe0110000 0x10000>;
72 #size-cells = <0>;
[all …]
|
| /kernel/linux/linux-6.6/include/linux/soc/mmp/ |
| D | cputype.h | 12 * PXA168 S0 0x56158400 0x0000C910
13 * PXA168 A0 0x56158400 0x00A0A168
14 * PXA910 Y1 0x56158400 0x00F2C920
15 * PXA910 A0 0x56158400 0x00F2C910
16 * PXA910 A1 0x56158400 0x00A0C910
17 * PXA920 Y0 0x56158400 0x00F2C920
18 * PXA920 A0 0x56158400 0x00A0C920
19 * PXA920 A1 0x56158400 0x00A1C920
20 * MMP2 Z0 0x560f5811 0x00F00410
21 * MMP2 Z1 0x560f5811 0x00E00410
[all …]
|
| /kernel/linux/linux-5.10/include/dt-bindings/clock/ |
| D | lpc18xx-ccu.h | 13 #define CLK_APB3_BUS 0x100
14 #define CLK_APB3_I2C1 0x108
15 #define CLK_APB3_DAC 0x110
16 #define CLK_APB3_ADC0 0x118
17 #define CLK_APB3_ADC1 0x120
18 #define CLK_APB3_CAN0 0x128
19 #define CLK_APB1_BUS 0x200
20 #define CLK_APB1_MOTOCON_PWM 0x208
21 #define CLK_APB1_I2C0 0x210
22 #define CLK_APB1_I2S 0x218
[all …]
|
| /kernel/linux/linux-6.6/include/dt-bindings/clock/ |
| D | lpc18xx-ccu.h | 13 #define CLK_APB3_BUS 0x100
14 #define CLK_APB3_I2C1 0x108
15 #define CLK_APB3_DAC 0x110
16 #define CLK_APB3_ADC0 0x118
17 #define CLK_APB3_ADC1 0x120
18 #define CLK_APB3_CAN0 0x128
19 #define CLK_APB1_BUS 0x200
20 #define CLK_APB1_MOTOCON_PWM 0x208
21 #define CLK_APB1_I2C0 0x210
22 #define CLK_APB1_I2S 0x218
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/include/asm/hardware/ |
| D | cache-aurora-l2.h | 14 #define AURORA_SYNC_REG 0x700
15 #define AURORA_RANGE_BASE_ADDR_REG 0x720
16 #define AURORA_FLUSH_PHY_ADDR_REG 0x7f0
17 #define AURORA_INVAL_RANGE_REG 0x774
18 #define AURORA_CLEAN_RANGE_REG 0x7b4
19 #define AURORA_FLUSH_RANGE_REG 0x7f4
23 (0x3 << AURORA_ACR_REPLACEMENT_OFFSET)
25 (0 << AURORA_ACR_REPLACEMENT_OFFSET)
34 #define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0
36 (0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/include/asm/hardware/ |
| D | cache-aurora-l2.h | 17 #define AURORA_SYNC_REG 0x700
18 #define AURORA_RANGE_BASE_ADDR_REG 0x720
19 #define AURORA_FLUSH_PHY_ADDR_REG 0x7f0
20 #define AURORA_INVAL_RANGE_REG 0x774
21 #define AURORA_CLEAN_RANGE_REG 0x7b4
22 #define AURORA_FLUSH_RANGE_REG 0x7f4
26 (0x3 << AURORA_ACR_REPLACEMENT_OFFSET)
28 (0 << AURORA_ACR_REPLACEMENT_OFFSET)
37 #define AURORA_ACR_FORCE_WRITE_POLICY_OFFSET 0
39 (0x3 << AURORA_ACR_FORCE_WRITE_POLICY_OFFSET)
[all …]
|
| /kernel/linux/linux-5.10/include/linux/soc/mmp/ |
| D | cputype.h | 12 * PXA168 S0 0x56158400 0x0000C910
13 * PXA168 A0 0x56158400 0x00A0A168
14 * PXA910 Y1 0x56158400 0x00F2C920
15 * PXA910 A0 0x56158400 0x00F2C910
16 * PXA910 A1 0x56158400 0x00A0C910
17 * PXA920 Y0 0x56158400 0x00F2C920
18 * PXA920 A0 0x56158400 0x00A0C920
19 * PXA920 A1 0x56158400 0x00A1C920
20 * MMP2 Z0 0x560f5811 0x00F00410
21 * MMP2 Z1 0x560f5811 0x00E00410
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/clock/ |
| D | renesas,emev2-smu.yaml | 28 const: 0
61 const: 0
92 const: 0
112 reg = <0xe0110000 0x10000>;
114 #size-cells = <0>;
119 #clock-cells = <0>;
126 #clock-cells = <0>;
128 usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
130 reg = <0x610 0>;
132 #clock-cells = <0>;
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/nxp/imx/ |
| D | imx6q-pinfunc.h | 13 #define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0
14 #define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0
15 #define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0
16 #define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0
17 #define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0
18 #define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0
19 #define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0
20 #define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0
21 #define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0
22 #define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0
[all …]
|
| D | imx6dl-pinfunc.h | 13 #define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0
14 #define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0
15 #define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0
16 #define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0
17 #define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0
18 #define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0
19 #define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0
20 #define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0
21 #define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0
22 #define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0
[all …]
|
| D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0
14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0
15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0
16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0
17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0
18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0
19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0
20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0
21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0
22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | imx6q-pinfunc.h | 13 #define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0
14 #define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0
15 #define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0
16 #define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0
17 #define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0
18 #define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0
19 #define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0
20 #define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0
21 #define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0
22 #define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0
[all …]
|
| D | imx6dl-pinfunc.h | 13 #define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0
14 #define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0
15 #define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0
16 #define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0
17 #define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0
18 #define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0
19 #define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0
20 #define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0
21 #define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0
22 #define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0
[all …]
|
| D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0
14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0
15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0
16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0
17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0
18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0
19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0
20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0
21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0
22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0
[all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/nouveau/nvkm/engine/gr/ |
| D | gv100.c | 32 u32 werr = nvkm_rd32(device, TPC_UNIT(gpc, tpc, 0x730 + (sm * 0x80))); in gv100_gr_trap_sm()
33 u32 gerr = nvkm_rd32(device, TPC_UNIT(gpc, tpc, 0x734 + (sm * 0x80))); in gv100_gr_trap_sm()
38 warp = nvkm_enum_find(gf100_mp_warp_error, werr & 0xffff); in gv100_gr_trap_sm()
44 nvkm_wr32(device, TPC_UNIT(gpc, tpc, 0x730 + sm * 0x80), 0x00000000); in gv100_gr_trap_sm()
45 nvkm_wr32(device, TPC_UNIT(gpc, tpc, 0x734 + sm * 0x80), gerr); in gv100_gr_trap_sm()
51 gv100_gr_trap_sm(gr, gpc, tpc, 0); in gv100_gr_trap_mp()
59 nvkm_mask(device, 0x4188a4, 0x03000000, 0x03000000); in gv100_gr_init_4188a4()
67 for (sm = 0; sm < 0x100; sm += 0x80) { in gv100_gr_init_shader_exceptions()
68 nvkm_wr32(device, TPC_UNIT(gpc, tpc, 0x728 + sm), 0x0085eb64); in gv100_gr_init_shader_exceptions()
69 nvkm_wr32(device, TPC_UNIT(gpc, tpc, 0x610), 0x00000001); in gv100_gr_init_shader_exceptions()
[all …]
|
| /kernel/linux/linux-5.10/include/linux/mfd/mt6358/ |
| D | registers.h | 10 #define MT6358_SWCID 0xa
11 #define MT6358_MISC_TOP_INT_CON0 0x188
12 #define MT6358_MISC_TOP_INT_STATUS0 0x194
13 #define MT6358_TOP_INT_STATUS0 0x19e
14 #define MT6358_SCK_TOP_INT_CON0 0x52e
15 #define MT6358_SCK_TOP_INT_STATUS0 0x53a
16 #define MT6358_EOSC_CALI_CON0 0x540
17 #define MT6358_EOSC_CALI_CON1 0x542
18 #define MT6358_RTC_MIX_CON0 0x544
19 #define MT6358_RTC_MIX_CON1 0x546
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/dsa/ |
| D | qca8k.h | 18 #define PHY_ID_QCA8337 0x004dd036
19 #define QCA8K_ID_QCA8337 0x13
23 #define QCA8K_CPU_PORT 0
28 #define QCA8K_REG_MASK_CTRL 0x000
29 #define QCA8K_MASK_CTRL_ID_M 0xff
31 #define QCA8K_REG_PORT0_PAD_CTRL 0x004
32 #define QCA8K_REG_PORT5_PAD_CTRL 0x008
33 #define QCA8K_REG_PORT6_PAD_CTRL 0x00c
36 ((0x8 + (x & 0x3)) << 22)
38 ((0x10 + (x & 0x3)) << 20)
[all …]
|
| /kernel/linux/linux-6.6/include/linux/mfd/mt6358/ |
| D | registers.h | 10 #define MT6358_SWCID 0xa
11 #define MT6358_TOPSTATUS 0x28
12 #define MT6358_TOP_RST_MISC 0x14c
13 #define MT6358_MISC_TOP_INT_CON0 0x188
14 #define MT6358_MISC_TOP_INT_STATUS0 0x194
15 #define MT6358_TOP_INT_STATUS0 0x19e
16 #define MT6358_SCK_TOP_INT_CON0 0x52e
17 #define MT6358_SCK_TOP_INT_STATUS0 0x53a
18 #define MT6358_EOSC_CALI_CON0 0x540
19 #define MT6358_EOSC_CALI_CON1 0x542
[all …]
|
| /kernel/linux/linux-5.10/drivers/nvmem/ |
| D | vf610-ocotp.c | 23 #define OCOTP_CTRL_REG 0x00
24 #define OCOTP_CTRL_SET 0x04
25 #define OCOTP_CTRL_CLR 0x08
26 #define OCOTP_TIMING 0x10
27 #define OCOTP_DATA 0x20
28 #define OCOTP_READ_CTRL_REG 0x30
29 #define OCOTP_READ_FUSE_DATA 0x40
33 #define OCOTP_CTRL_WR_UNLOCK_KEY 0x3E77
35 #define OCOTP_CTRL_ADDR 0
36 #define OCOTP_CTRL_ADDR_MASK GENMASK(6, 0)
[all …]
|
| /kernel/linux/linux-6.6/drivers/nvmem/ |
| D | vf610-ocotp.c | 23 #define OCOTP_CTRL_REG 0x00
24 #define OCOTP_CTRL_SET 0x04
25 #define OCOTP_CTRL_CLR 0x08
26 #define OCOTP_TIMING 0x10
27 #define OCOTP_DATA 0x20
28 #define OCOTP_READ_CTRL_REG 0x30
29 #define OCOTP_READ_FUSE_DATA 0x40
33 #define OCOTP_CTRL_WR_UNLOCK_KEY 0x3E77
35 #define OCOTP_CTRL_ADDR 0
36 #define OCOTP_CTRL_ADDR_MASK GENMASK(6, 0)
[all …]
|
| /kernel/linux/linux-5.10/drivers/iio/adc/ |
| D | ep93xx_adc.c | 39 #define EP93XX_ADC_RESULT 0x08
41 #define EP93XX_ADC_SWITCH 0x18
42 #define EP93XX_ADC_SW_LOCK 0x20
63 * Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
68 EP93XX_ADC_CH(0, "YM", 0x608),
69 EP93XX_ADC_CH(1, "SXP", 0x680),
70 EP93XX_ADC_CH(2, "SXM", 0x640),
71 EP93XX_ADC_CH(3, "SYP", 0x620),
72 EP93XX_ADC_CH(4, "SYM", 0x610),
73 EP93XX_ADC_CH(5, "XP", 0x601),
[all …]
|
| /kernel/linux/linux-6.6/drivers/iio/adc/ |
| D | ep93xx_adc.c | 40 #define EP93XX_ADC_RESULT 0x08
42 #define EP93XX_ADC_SWITCH 0x18
43 #define EP93XX_ADC_SW_LOCK 0x20
64 * Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
69 EP93XX_ADC_CH(0, "YM", 0x608),
70 EP93XX_ADC_CH(1, "SXP", 0x680),
71 EP93XX_ADC_CH(2, "SXM", 0x640),
72 EP93XX_ADC_CH(3, "SYP", 0x620),
73 EP93XX_ADC_CH(4, "SYM", 0x610),
74 EP93XX_ADC_CH(5, "XP", 0x601),
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/cavium/thunder/ |
| D | thunder_bgx.h | 10 #define PCI_DEVICE_ID_THUNDER_BGX 0xA026
11 #define PCI_DEVICE_ID_THUNDER_RGX 0xA054
14 #define PCI_SUBSYS_DEVID_88XX_BGX 0xA126
15 #define PCI_SUBSYS_DEVID_81XX_BGX 0xA226
16 #define PCI_SUBSYS_DEVID_81XX_RGX 0xA254
17 #define PCI_SUBSYS_DEVID_83XX_BGX 0xA326
27 #define DEFAULT_PAUSE_TIME 0xFFFF
29 #define BGX_ID_MASK 0x3
30 #define LMAC_ID_MASK 0x3
35 #define BGX_CMRX_CFG 0x00
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/cavium/thunder/ |
| D | thunder_bgx.h | 10 #define PCI_DEVICE_ID_THUNDER_BGX 0xA026
11 #define PCI_DEVICE_ID_THUNDER_RGX 0xA054
14 #define PCI_SUBSYS_DEVID_88XX_BGX 0xA126
15 #define PCI_SUBSYS_DEVID_81XX_BGX 0xA226
16 #define PCI_SUBSYS_DEVID_81XX_RGX 0xA254
17 #define PCI_SUBSYS_DEVID_83XX_BGX 0xA326
27 #define DEFAULT_PAUSE_TIME 0xFFFF
29 #define BGX_ID_MASK 0x3
30 #define LMAC_ID_MASK 0x3
35 #define BGX_CMRX_CFG 0x00
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/dsa/sja1105/ |
| D | sja1105_spi.c | 25 memset(buf, 0, size); in sja1105_spi_message_pack()
57 int rc, i = 0; in sja1105_xfer()
80 for (i = 0; i < num_chunks; i++) { in sja1105_xfer()
94 msg.read_count = 0; in sja1105_xfer()
138 if (rc < 0) in sja1105_xfer()
171 sja1105_pack(packed_buf, value, 63, 0, 8); in sja1105_xfer_u64()
176 sja1105_unpack(packed_buf, value, 63, 0, 8); in sja1105_xfer_u64()
195 sja1105_pack(packed_buf, &tmp, 31, 0, 4); in sja1105_xfer_u32()
201 sja1105_unpack(packed_buf, &tmp, 31, 0, 4); in sja1105_xfer_u32()
212 u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0}; in sja1105et_reset_cmd()
[all …]
|