| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/sound/ |
| D | fsl,micfil.yaml | 45 - description: PLL clock source for 8kHz series
46 - description: PLL clock source for 11kHz series
81 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/radeon/ |
| D | rs780_dpm.h | 102 #define RS780_SLOWCLKFEEDBACKDIV_DFLT 110
106 #define RS780_DEFAULT_VCLK_FREQ 53300 /* 10 khz */
107 #define RS780_DEFAULT_DCLK_FREQ 40000 /* 10 khz */
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/radeon/ |
| D | rs780_dpm.h | 102 #define RS780_SLOWCLKFEEDBACKDIV_DFLT 110
106 #define RS780_DEFAULT_VCLK_FREQ 53300 /* 10 khz */
107 #define RS780_DEFAULT_DCLK_FREQ 40000 /* 10 khz */
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/amplifiers/ |
| D | adi,ada4250.yaml | 13 Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
|
| /kernel/linux/linux-6.6/drivers/cpufreq/ |
| D | powernow-k6.c | 26 static unsigned int busfreq; /* FSB, in 10 kHz */
36 MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
40 {0, 60, /* 110 -> 6.0x */ 0},
157 unsigned khz; in powernow_k6_cpu_init() local
163 khz = cpu_khz; in powernow_k6_cpu_init()
165 if (khz >= usual_frequency_table[i].freq - FREQ_RANGE && in powernow_k6_cpu_init()
166 khz <= usual_frequency_table[i].freq + FREQ_RANGE) { in powernow_k6_cpu_init()
167 khz = usual_frequency_table[i].freq; in powernow_k6_cpu_init()
184 khz); in powernow_k6_cpu_init()
197 pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); in powernow_k6_cpu_init()
[all …]
|
| D | powernow-k7.c | 79 110, 115, 120, 125, 50, 55, 60, 65,
377 * get a KHz value (e.g. 1266000). However, powernow-k7 works in powernow_acpi_init()
378 * with true KHz values (e.g. 1266768). To ensure that all in powernow_acpi_init()
381 * to ensure that perflib's computed KHz value is greater than in powernow_acpi_init()
382 * or equal to powernow's KHz value. in powernow_acpi_init()
527 * a multiple of 100000/3 khz, then we compute sgtc according
|
| /kernel/linux/linux-5.10/drivers/cpufreq/ |
| D | powernow-k6.c | 26 static unsigned int busfreq; /* FSB, in 10 kHz */
36 MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
40 {0, 60, /* 110 -> 6.0x */ 0},
157 unsigned khz; in powernow_k6_cpu_init() local
163 khz = cpu_khz; in powernow_k6_cpu_init()
165 if (khz >= usual_frequency_table[i].freq - FREQ_RANGE && in powernow_k6_cpu_init()
166 khz <= usual_frequency_table[i].freq + FREQ_RANGE) { in powernow_k6_cpu_init()
167 khz = usual_frequency_table[i].freq; in powernow_k6_cpu_init()
184 khz); in powernow_k6_cpu_init()
197 pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); in powernow_k6_cpu_init()
[all …]
|
| D | powernow-k7.c | 79 110, 115, 120, 125, 50, 55, 60, 65,
377 * get a KHz value (e.g. 1266000). However, powernow-k7 works in powernow_acpi_init()
378 * with true KHz values (e.g. 1266768). To ensure that all in powernow_acpi_init()
381 * to ensure that perflib's computed KHz value is greater than in powernow_acpi_init()
382 * or equal to powernow's KHz value. in powernow_acpi_init()
527 * a multiple of 100000/3 khz, then we compute sgtc according
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/usb/ |
| D | rockchip,dwc3.txt | 9 "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz
53 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
| /kernel/linux/linux-5.10/drivers/phy/intel/ |
| D | phy-intel-keembay-emmc.c | 89 else if (mhz <= 140 && mhz >= 110) in keembay_emmc_phy_power()
91 else if (mhz <= 110 && mhz >= 80) in keembay_emmc_phy_power()
163 * is super slow (like 100kHz) this could take as long as 5.1 ms as in keembay_emmc_phy_power()
165 * hopefully we won't be running at 100 kHz, but we should still make in keembay_emmc_phy_power()
|
| /kernel/linux/linux-6.6/drivers/phy/intel/ |
| D | phy-intel-keembay-emmc.c | 89 else if (mhz <= 140 && mhz >= 110) in keembay_emmc_phy_power()
91 else if (mhz <= 110 && mhz >= 80) in keembay_emmc_phy_power()
163 * is super slow (like 100kHz) this could take as long as 5.1 ms as in keembay_emmc_phy_power()
165 * hopefully we won't be running at 100 kHz, but we should still make in keembay_emmc_phy_power()
|
| /kernel/linux/linux-5.10/drivers/net/wireless/st/cw1200/ |
| D | main.c | 71 RATETAB_ENT(110, 3, 0),
482 /* Clock is in KHz */
486 case 0x32C8: /* 13000 KHz */ in cw1200_dpll_from_clk()
488 case 0x3E80: /* 16000 KHz */ in cw1200_dpll_from_clk()
490 case 0x41A0: /* 16800 KHz */ in cw1200_dpll_from_clk()
492 case 0x4B00: /* 19200 KHz */ in cw1200_dpll_from_clk()
494 case 0x5DC0: /* 24000 KHz */ in cw1200_dpll_from_clk()
496 case 0x6590: /* 26000 KHz */ in cw1200_dpll_from_clk()
498 case 0x8340: /* 33600 KHz */ in cw1200_dpll_from_clk()
500 case 0x9600: /* 38400 KHz */ in cw1200_dpll_from_clk()
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/wireless/st/cw1200/ |
| D | main.c | 71 RATETAB_ENT(110, 3, 0),
483 /* Clock is in KHz */
487 case 0x32C8: /* 13000 KHz */ in cw1200_dpll_from_clk()
489 case 0x3E80: /* 16000 KHz */ in cw1200_dpll_from_clk()
491 case 0x41A0: /* 16800 KHz */ in cw1200_dpll_from_clk()
493 case 0x4B00: /* 19200 KHz */ in cw1200_dpll_from_clk()
495 case 0x5DC0: /* 24000 KHz */ in cw1200_dpll_from_clk()
497 case 0x6590: /* 26000 KHz */ in cw1200_dpll_from_clk()
499 case 0x8340: /* 33600 KHz */ in cw1200_dpll_from_clk()
501 case 0x9600: /* 38400 KHz */ in cw1200_dpll_from_clk()
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/dvb-frontends/ |
| D | dvb-pll.c | 176 .min = 44250 * kHz,
190 .min = 44250 * kHz,
214 .min = 44250 * kHz,
224 { 163834000, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ },
227 { 443834000, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ },
228 { 444000000, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ },
231 { 444834000, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ },
248 .min = 44250 * kHz,
439 .min = 44250 * kHz,
|
| D | s5h1409.c | 296 { 110, 260, },
353 static int s5h1409_set_if_freq(struct dvb_frontend *fe, int KHz) in s5h1409_set_if_freq() argument
357 dprintk("%s(%d KHz)\n", __func__, KHz); in s5h1409_set_if_freq()
359 switch (KHz) { in s5h1409_set_if_freq()
373 state->if_freq = KHz; in s5h1409_set_if_freq()
|
| /kernel/linux/linux-6.6/drivers/media/dvb-frontends/ |
| D | dvb-pll.c | 176 .min = 44250 * kHz,
190 .min = 44250 * kHz,
214 .min = 44250 * kHz,
224 { 163834000, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ },
227 { 443834000, 166667, 0xca, 0xc2 /* 110 0 0 0 10 */ },
228 { 444000000, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ },
231 { 444834000, 166667, 0xca, 0xc4 /* 110 0 0 1 00 */ },
248 .min = 44250 * kHz,
439 .min = 44250 * kHz,
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/qcom/ |
| D | sc7280-herobrine-zombie.dtsi | 64 /* Set the PWM period to 320 microseconds (3.125kHz frequency) */
231 "UIM1_CLK_GPIO_110", /* 110 */
|
| /kernel/linux/linux-6.6/drivers/comedi/drivers/ |
| D | mpc624.c | 31 * 0 3.52kHz 23uV 17
32 * 1 1.76kHz 3.5uV 20
36 * 5 110Hz 750uV 22.9
|
| /kernel/linux/linux-5.10/drivers/staging/comedi/drivers/ |
| D | mpc624.c | 31 * 0 3.52kHz 23uV 17
32 * 1 1.76kHz 3.5uV 20
36 * 5 110Hz 750uV 22.9
|
| /kernel/linux/linux-6.6/drivers/video/fbdev/core/ |
| D | modedb.c | 38 /* 640x400 @ 70 Hz, 31.5 kHz hsync */
42 /* 640x480 @ 60 Hz, 31.5 kHz hsync */
46 /* 800x600 @ 56 Hz, 35.15 kHz hsync */
50 /* 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync */
54 /* 640x400 @ 85 Hz, 37.86 kHz hsync */
58 /* 640x480 @ 72 Hz, 36.5 kHz hsync */
62 /* 640x480 @ 75 Hz, 37.50 kHz hsync */
66 /* 800x600 @ 60 Hz, 37.8 kHz hsync */
71 /* 640x480 @ 85 Hz, 43.27 kHz hsync */
75 /* 1152x864 @ 89 Hz interlaced, 44 kHz hsync */
[all …]
|
| /kernel/linux/linux-5.10/drivers/video/fbdev/core/ |
| D | modedb.c | 38 /* 640x400 @ 70 Hz, 31.5 kHz hsync */
42 /* 640x480 @ 60 Hz, 31.5 kHz hsync */
46 /* 800x600 @ 56 Hz, 35.15 kHz hsync */
50 /* 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync */
54 /* 640x400 @ 85 Hz, 37.86 kHz hsync */
58 /* 640x480 @ 72 Hz, 36.5 kHz hsync */
62 /* 640x480 @ 75 Hz, 37.50 kHz hsync */
66 /* 800x600 @ 60 Hz, 37.8 kHz hsync */
71 /* 640x480 @ 85 Hz, 43.27 kHz hsync */
75 /* 1152x864 @ 89 Hz interlaced, 44 kHz hsync */
[all …]
|
| /kernel/linux/linux-5.10/arch/x86/kernel/ |
| D | tsc.c | 38 #define KHZ 1000 macro
109 * We can use khz divisor instead of mhz to keep a better precision.
130 static void __set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now) in __set_cyc2ns_scale() argument
143 clocks_calc_mult_shift(&data.cyc2ns_mul, &data.cyc2ns_shift, khz, in __set_cyc2ns_scale()
168 static void set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now) in set_cyc2ns_scale() argument
175 if (khz) in set_cyc2ns_scale()
176 __set_cyc2ns_scale(khz, cpu, tsc_now); in set_cyc2ns_scale()
384 * in kHz.
607 * kHz = ticks / time-in-seconds / 1000; in quick_pit_calibrate()
608 * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000 in quick_pit_calibrate()
[all …]
|
| /kernel/linux/linux-6.6/arch/x86/kernel/ |
| D | tsc.c | 39 #define KHZ 1000 macro
116 * We can use khz divisor instead of mhz to keep a better precision.
144 static void __set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now) in __set_cyc2ns_scale() argument
157 clocks_calc_mult_shift(&data.cyc2ns_mul, &data.cyc2ns_shift, khz, in __set_cyc2ns_scale()
182 static void set_cyc2ns_scale(unsigned long khz, int cpu, unsigned long long tsc_now) in set_cyc2ns_scale() argument
189 if (khz) in set_cyc2ns_scale()
190 __set_cyc2ns_scale(khz, cpu, tsc_now); in set_cyc2ns_scale()
421 * in kHz.
644 * kHz = ticks / time-in-seconds / 1000; in quick_pit_calibrate()
645 * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000 in quick_pit_calibrate()
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | omap5.dtsi | 53 /* kHz uV */
72 /* kHz uV */
262 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
304 dmas = <&sdma 111>, <&sdma 110>;
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/ti/omap/ |
| D | omap5.dtsi | 53 /* kHz uV */
72 /* kHz uV */
312 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
366 dmas = <&sdma 111>, <&sdma 110>;
|