| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/interrupt-controller/ |
| D | sifive,plic-1.0.0.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 4 --- 5 $id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: SiFive Platform-Level Interrupt Controller (PLIC) 11 SiFive SoCs and other RISC-V SoCs include an implementation of the 12 Platform-Level Interrupt Controller (PLIC) high-level specification in 13 the RISC-V Privileged Architecture specification. The PLIC connects all 18 in an 4 core system with 2-way SMT, you have 8 harts and probably at least two 21 Each interrupt can be enabled on per-context basis. Any context can claim [all …]
|
| D | riscv,cpu-intc.txt | 1 RISC-V Hart-Level Interrupt Controller (HLIC) 2 --------------------------------------------- 4 RISC-V cores include Control Status Registers (CSRs) which are local to each 5 CPU core (HART in RISC-V terminology) and can be read or written by software. 10 The RISC-V supervisor ISA manual specifies three interrupt sources that are 13 timer interrupt comes from an architecturally mandated real-time timer that is 16 via the platform-level interrupt controller (PLIC). 18 All RISC-V systems that conform to the supervisor ISA specification are 21 entry, though external interrupt controllers (like the PLIC, for example) will 23 a PLIC interrupt property will typically list the HLICs for all present HARTs [all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/interrupt-controller/ |
| D | sifive,plic-1.0.0.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 4 --- 5 $id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: SiFive Platform-Level Interrupt Controller (PLIC) 11 SiFive SOCs include an implementation of the Platform-Level Interrupt Controller 12 (PLIC) high-level specification in the RISC-V Privileged Architecture 13 specification. The PLIC connects all external interrupts in the system to all 17 in an 4 core system with 2-way SMT, you have 8 harts and probably at least two 20 Each interrupt can be enabled on per-context basis. Any context can claim [all …]
|
| D | riscv,cpu-intc.txt | 1 RISC-V Hart-Level Interrupt Controller (HLIC) 2 --------------------------------------------- 4 RISC-V cores include Control Status Registers (CSRs) which are local to each 5 CPU core (HART in RISC-V terminology) and can be read or written by software. 10 The RISC-V supervisor ISA manual specifies three interrupt sources that are 13 timer interrupt comes from an architecturally mandated real-time timer that is 16 via the platform-level interrupt controller (PLIC). 18 All RISC-V systems that conform to the supervisor ISA specification are 21 entry, though external interrupt controllers (like the PLIC, for example) will 23 a PLIC interrupt property will typically list the HLICs for all present HARTs [all …]
|
| /kernel/linux/linux-6.6/arch/riscv/boot/dts/microchip/ |
| D | mpfs.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* Copyright (c) 2020-2021 Microchip Technology Inc */ 4 /dts-v1/; 5 #include "dt-bindings/clock/microchip,mpfs-clock.h" 8 #address-cells = <2>; 9 #size-cells = <2>; 14 #address-cells = <1>; 15 #size-cells = <0>; 20 i-cache-block-size = <64>; 21 i-cache-sets = <128>; [all …]
|
| D | mpfs-icicle-kit-fabric.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* Copyright (c) 2020-2021 Microchip Technology Inc */ 5 compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", 9 compatible = "microchip,corepwm-rtl-v4"; 11 microchip,sync-update-mask = /bits/ 32 <0>; 12 #pwm-cells = <3>; 18 compatible = "microchip,corei2c-rtl-v7"; 20 #address-cells = <1>; 21 #size-cells = <0>; 23 interrupt-parent = <&plic>; [all …]
|
| D | mpfs-polarberry-fabric.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* Copyright (c) 2020-2022 Microchip Technology Inc */ 5 fabric_clk3: fabric-clk3 { 6 compatible = "fixed-clock"; 7 #clock-cells = <0>; 8 clock-frequency = <62500000>; 11 fabric_clk1: fabric-clk1 { 12 compatible = "fixed-clock"; 13 #clock-cells = <0>; 14 clock-frequency = <125000000>; [all …]
|
| D | mpfs-m100pfs-fabric.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 5 fabric_clk3: fabric-clk3 { 6 compatible = "fixed-clock"; 7 #clock-cells = <0>; 8 clock-frequency = <62500000>; 11 fabric_clk1: fabric-clk1 { 12 compatible = "fixed-clock"; 13 #clock-cells = <0>; 14 clock-frequency = <125000000>; 18 compatible = "microchip,pcie-host-1.0"; [all …]
|
| /kernel/linux/linux-6.6/arch/riscv/boot/dts/allwinner/ |
| D | sun20i-d1s.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ or MIT) 2 // Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org> 6 #include "sunxi-d1s-t113.dtsi" 10 timebase-frequency = <24000000>; 11 #address-cells = <1>; 12 #size-cells = <0>; 19 d-cache-block-size = <64>; 20 d-cache-sets = <256>; 21 d-cache-size = <32768>; 22 i-cache-block-size = <64>; [all …]
|
| /kernel/linux/linux-5.10/drivers/irqchip/ |
| D | irq-sifive-plic.c | 1 // SPDX-License-Identifier: GPL-2.0 6 #define pr_fmt(fmt) "plic: " fmt 23 * This driver implements a version of the RISC-V PLIC with the actual layout 26 * https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf 28 * The largest number supported by devices marked as 'sifive,plic-1.0.0', is 29 * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged 87 u32 __iomem *reg = handler->enable_base + (hwirq / 32) * sizeof(u32); in plic_toggle() 88 u32 hwirq_mask = 1 << (hwirq % 32); in plic_toggle() 90 raw_spin_lock(&handler->enable_lock); in plic_toggle() 95 raw_spin_unlock(&handler->enable_lock); in plic_toggle() [all …]
|
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only 23 default 1 216 bool "J-Core integrated AIC" if COMPILE_TEST 220 Support for the J-Core integrated AIC. 231 interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs. 234 bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST 239 devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs. 274 tristate "TS-4800 IRQ controller" 279 Support for the TS-4800 FPGA IRQ controller 444 bool "C-SKY Multi Processor Interrupt Controller" [all …]
|
| /kernel/linux/linux-6.6/arch/riscv/boot/dts/renesas/ |
| D | r9a07g043f.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 8 #include <dt-bindings/interrupt-controller/irq.h> 16 #address-cells = <1>; 17 #size-cells = <0>; 18 timebase-frequency = <12000000>; 23 #cooling-cells = <2>; 27 mmu-type = "riscv,sv39"; 28 i-cache-size = <0x8000>; 29 i-cache-line-size = <0x40>; 30 d-cache-size = <0x8000>; [all …]
|
| /kernel/linux/linux-6.6/drivers/irqchip/ |
| D | irq-sifive-plic.c | 1 // SPDX-License-Identifier: GPL-2.0 6 #define pr_fmt(fmt) "plic: " fmt 24 * This driver implements a version of the RISC-V PLIC with the actual layout 27 * https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf 29 * The largest number supported by devices marked as 'sifive,plic-1.0.0', is 30 * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged 96 u32 hwirq_mask = 1 << (hwirq % 32); in __plic_toggle() 106 raw_spin_lock(&handler->enable_lock); in plic_toggle() 107 __plic_toggle(handler->enable_base, hwirq, enable); in plic_toggle() 108 raw_spin_unlock(&handler->enable_lock); in plic_toggle() [all …]
|
| /kernel/linux/linux-6.6/arch/riscv/boot/dts/starfive/ |
| D | jh7100.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 7 /dts-v1/; 8 #include <dt-bindings/clock/starfive-jh7100.h> 9 #include <dt-bindings/reset/starfive-jh7100.h> 13 #address-cells = <2>; 14 #size-cells = <2>; 17 #address-cells = <1>; 18 #size-cells = <0>; 21 compatible = "sifive,u74-mc", "riscv"; 23 d-cache-block-size = <64>; [all …]
|
| /kernel/linux/linux-6.6/arch/riscv/boot/dts/thead/ |
| D | th1520.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 7 #include <dt-bindings/interrupt-controller/irq.h> 11 #address-cells = <2>; 12 #size-cells = <2>; 15 #address-cells = <1>; 16 #size-cells = <0>; 17 timebase-frequency = <3000000>; 24 i-cache-block-size = <64>; 25 i-cache-size = <65536>; 26 i-cache-sets = <512>; [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/net/can/ |
| D | microchip,mpfs-can.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Conor Dooley <conor.dooley@microchip.com> 14 - $ref: can-controller.yaml# 18 const: microchip,mpfs-can 21 maxItems: 1 24 maxItems: 1 27 maxItems: 1 [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/spi/ |
| D | microchip,mpfs-spi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 14 - Conor Dooley <conor.dooley@microchip.com> 17 - $ref: spi-controller.yaml# 22 - items: 23 - const: microchip,mpfs-qspi 24 - const: microchip,coreqspi-rtl-v2 25 - const: microchip,coreqspi-rtl-v2 # FPGA QSPI [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/usb/ |
| D | microchip,mpfs-musb.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - $ref: usb-drd.yaml# 13 - Conor Dooley <conor.dooley@microchip.com> 18 - microchip,mpfs-musb 23 maxItems: 1 29 interrupt-names: 31 - const: dma [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/i2c/ |
| D | microchip,corei2c.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Daire McNamara <daire.mcnamara@microchip.com> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 18 - items: 19 - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs 20 - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core 21 - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core 24 maxItems: 1 [all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/gpio/ |
| D | sifive,gpio.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Yash Shah <yash.shah@sifive.com> 11 - Paul Walmsley <paul.walmsley@sifive.com> 16 - const: sifive,fu540-c000-gpio 17 - const: sifive,gpio0 20 maxItems: 1 25 minItems: 1 28 interrupt-controller: true [all …]
|
| /kernel/linux/linux-5.10/arch/m68k/include/asm/ |
| D | m5272sim.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 5 * m5272sim.h -- ColdFire 5272 System Integration Module support. 31 #define MCFSIM_ICR1 (MCF_MBAR + 0x20) /* Intr Ctrl reg 1 */ 68 #define MCFSIM_DCAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address */ 69 #define MCFSIM_DCMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg */ 70 #define MCFSIM_DCCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control */ 100 #define MCF_IRQ_EINT1 65 /* External Interrupt 1 */ 104 #define MCF_IRQ_TIMER1 69 /* Timer 1 */ 109 #define MCF_IRQ_UART1 74 /* UART 1 */ 110 #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ [all …]
|
| /kernel/linux/linux-6.6/arch/m68k/include/asm/ |
| D | m5272sim.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 5 * m5272sim.h -- ColdFire 5272 System Integration Module support. 31 #define MCFSIM_ICR1 (MCF_MBAR + 0x20) /* Intr Ctrl reg 1 */ 68 #define MCFSIM_DCAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address */ 69 #define MCFSIM_DCMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg */ 70 #define MCFSIM_DCCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control */ 100 #define MCF_IRQ_EINT1 65 /* External Interrupt 1 */ 104 #define MCF_IRQ_TIMER1 69 /* Timer 1 */ 109 #define MCF_IRQ_UART1 74 /* UART 1 */ 110 #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/gpio/ |
| D | sifive,gpio.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Paul Walmsley <paul.walmsley@sifive.com> 15 - enum: 16 - sifive,fu540-c000-gpio 17 - sifive,fu740-c000-gpio 18 - canaan,k210-gpiohs 19 - const: sifive,gpio0 22 maxItems: 1 [all …]
|
| D | microchip,mpfs-gpio.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Conor Dooley <conor.dooley@microchip.com> 15 - enum: 16 - microchip,mpfs-gpio 19 maxItems: 1 24 minItems: 1 27 interrupt-controller: true [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pwm/ |
| D | pwm-sifive.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/pwm/pwm-sifive.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Paul Walmsley <paul.walmsley@sifive.com> 19 numbers can be found here - 21 https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm 24 - $ref: pwm.yaml# 29 - enum: 30 - sifive,fu540-c000-pwm [all …]
|