Lines Matching +full:hardware +full:- +full:driven
1 # SPDX-License-Identifier: GPL-2.0
35 bool "ePAPR para-virtualization support"
37 Enables ePAPR para-virtualization support for guests.
45 Support for running natively on the hardware, i.e. without
46 a hypervisor. This option is not user-selectable but should
62 bool "Device-tree based CPU feature discovery & setup"
94 The MPIC global timer is a hardware timer inside the
96 specified interval times out, the hardware timer generates
121 registers are used for inter-processor communication.
203 bool "On-chip CPU temperature sensor support"
206 G3 and G4 processors have an on-chip temperature sensor called the
207 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
208 temperature within 2-4 degrees Celsius. This option shows the current
209 on-die temperature in /proc/cpuinfo if the cpu supports it.
215 bool "Interrupt driven TAU driver (EXPERIMENTAL)"
218 The TAU supports an interrupt driven mode which causes an interrupt
221 a timer is used to re-check the temperature periodically.
229 The TAU hardware can compare the temperature to an upper and lower
232 either changing a lot, or the TAU hardware is broken (likely on some
245 Say Y here if you're going to use hardware that connects to the
290 bool "MPC8349E-mITX MCU driver"
294 Say Y here to enable soft power-off functionality on the Freescale
295 boards with the MPC8349E-mITX-compatible MCU chips. This driver will