Lines Matching +full:on +full:- +full:module
1 # SPDX-License-Identifier: GPL-2.0-only
10 bool "ST-Ericsson AB8500 GPADC driver"
11 depends on AB8500_CORE && REGULATOR_AB8500
26 depends on I2C
29 Say yes here to build support for Analog Devices AD7091R-5 ADC.
32 tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver"
33 depends on SPI_MASTER
36 Say yes here to build support for Analog Devices AD7124-4 and AD7124-8
39 To compile this driver as a module, choose M here: the module will be
44 depends on SPI
51 To compile this driver as a module, choose M here: the
52 module will be called ad7192.
56 depends on SPI_MASTER
64 To compile this driver as a module, choose M here: the module will be
69 depends on I2C
74 To compile this driver as a module, choose M here: the
75 module will be called ad7291.
79 depends on SPI
84 To compile this driver as a module, choose M here: the
85 module will be called ad7292.
89 depends on SPI
96 To compile this driver as a module, choose M here: the
97 module will be called ad7298.
100 tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD an TI"
101 depends on SPI
112 To compile this driver as a module, choose M here: the
113 module will be called ad7476.
122 depends on HAS_IOMEM
126 ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
128 To compile this driver as a module, choose M here: the
129 module will be called ad7606_parallel.
133 depends on SPI
137 ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
139 To compile this driver as a module, choose M here: the
140 module will be called ad7606_spi.
144 depends on SPI_MASTER
148 Say yes here to build support for Analog Devices AD7766, AD7766-1,
149 AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters.
151 To compile this driver as a module, choose M here: the module will be
155 tristate "Analog Devices AD7768-1 ADC driver"
156 depends on SPI
161 Say yes here to build support for Analog Devices AD7768-1 SPI
162 simultaneously sampling sigma-delta analog to digital converter (ADC).
164 To compile this driver as a module, choose M here: the module will be
165 called ad7768-1.
169 depends on SPI
170 depends on GPIOLIB || COMPILE_TEST
176 To compile this driver as a module, choose M here: the
177 module will be called ad7780.
181 depends on SPI
187 To compile this driver as a module, choose M here: the module will be
192 depends on SPI
198 To compile this driver as a module, choose M here: the
199 module will be called AD7793.
203 depends on SPI
210 To compile this driver as a module, choose M here: the
211 module will be called ad7887.
215 depends on SPI
222 To compile this driver as a module, choose M here: the
223 module will be called ad7923.
227 depends on SPI
232 To compile this driver as a module, choose M here: the
233 module will be called ad7949.
237 depends on I2C
246 To compile this driver as a module, choose M here: the module will be
251 depends on SPI
252 depends on ADI_AXI_ADC
255 * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
261 To compile this driver as a module, choose M here: the module will be
269 depends on HAS_IOMEM
270 depends on OF
274 analog-to-digital (ADC) converters that require either a high-speed
283 To compile this driver as a module, choose M here: the
284 module will be called adi-axi-adc.
288 depends on ARCH_ASPEED || COMPILE_TEST
289 depends on COMMON_CLK
294 To compile this driver as a module, choose M here: the module will be
299 depends on ARCH_AT91 || COMPILE_TEST
300 depends on INPUT && SYSFS && OF
306 To compile this driver as a module, choose M here: the module will be
311 depends on ARCH_AT91 || COMPILE_TEST
312 depends on HAS_IOMEM
317 available on SAMA5D2 SoC family.
319 To compile this driver as a module, choose M here: the module will be
320 called at91-sama5d2_adc.
323 tristate "X-Powers AXP20X and AXP22X ADC driver"
324 depends on MFD_AXP20X
326 Say yes here to have support for X-Powers power management IC (PMIC)
329 To compile this driver as a module, choose M here: the module will be
333 tristate "X-Powers AXP288 ADC driver"
334 depends on MFD_AXP20X
336 Say yes here to have support for X-Powers power management IC (PMIC) ADC
337 device. Depending on platform configuration, this general purpose ADC can
340 To compile this driver as a module, choose M here: the module will be
345 depends on (ARCH_BCM_IPROC && OF) || COMPILE_TEST
346 depends on MFD_SYSCON
357 depends on ARCH_BERLIN
364 depends on HAS_IOMEM && HAVE_CLK && REGULATOR
370 This driver can also be built as a module. If so, the module will be
375 depends on MFD_CPCAP
381 This driver can also be built as a module. If so, the module will be
382 called cpcap-adc.
386 depends on MFD_DA9150
390 This driver can also be built as a module. If chosen, the module name
391 will be da9150-gpadc.
393 To compile this driver as a module, choose M here: the module will be
394 called berlin2-adc.
397 tristate "Diolan DLN-2 ADC driver support"
398 depends on MFD_DLN2
402 Say yes here to build support for Diolan DLN-2 ADC.
404 This driver can also be built as a module. If so, the module will be
409 depends on OF
414 To compile this driver as a module, choose M here: the module will be
415 called envelope-detector.
419 depends on ARCH_EP93XX
421 Driver for the ADC module on the EP93XX series of SoC from Cirrus Logic.
422 It's recommended to switch on CONFIG_HIGH_RES_TIMERS option, in this
425 To compile this driver as a module, choose M here: the module will be
430 depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
431 depends on HAS_IOMEM
437 To compile this driver as a module, choose M here: the module will be
442 depends on MFD_MXS_LRADC
447 i.MX23/i.MX28 LRADC. This includes general-purpose ADC readings,
450 This driver can also be built as a module. If so, the module will be
451 called mxs-lradc-adc.
455 depends on MFD_MX25_TSADC
461 tristate "Holt Integrated Circuits HI-8435 threshold detector"
463 depends on SPI
466 HI-8435 chip.
468 This driver can also be built as a module. If so, the module will be
473 depends on GPIOLIB
489 This driver can also be built as a module. If so, the module will be
494 depends on I2C && !SENSORS_INA2XX
504 depends on MIPS || COMPILE_TEST
509 This driver can also be built as a module. If so, the module will be
514 depends on INTEL_SOC_PMIC_MRFLD
517 device. Depending on platform configuration, this general purpose ADC can
520 To compile this driver as a module, choose M here: the module will be
525 depends on ARCH_MXC || COMPILE_TEST
526 depends on HAS_IOMEM
530 This driver can also be built as a module. If so, the module will be
535 depends on MFD_LP8788
539 To compile this driver as a module, choose M here: the module will be
544 depends on ARCH_LPC18XX || COMPILE_TEST
545 depends on OF && HAS_IOMEM
549 To compile this driver as a module, choose M here: the module will be
554 depends on ARCH_LPC32XX || COMPILE_TEST
555 depends on HAS_IOMEM
566 depends on I2C
569 LTC2473 16-bit I2C ADC.
571 This driver can also be built as a module. If so, the module will
576 depends on I2C
580 To compile this driver as a module, choose M here: the module will be
585 depends on SPI
588 16-Bit 8-/16-Channel Delta Sigma ADC.
590 To compile this driver as a module, choose M here: the module will be
595 depends on I2C
598 16-Bit 8-/16-Channel Delta Sigma ADC.
600 To compile this driver as a module, choose M here: the module will be
605 depends on SPI
609 Say yes here to build support for Maxim SPI {10,12}-bit ADC models:
612 To compile this driver as a module, choose M here: the module will be
617 depends on SPI_MASTER
621 To compile this driver as a module, choose M here: the module will be
626 depends on SPI
631 8-bit, dual-channel ADCs.
633 To compile this driver as a module, choose M here: the module will be
638 depends on SPI_MASTER
640 Say yes here to build support for Maxim max1241 12-bit, single-channel
643 To compile this driver as a module, choose M here: the module will be
648 depends on I2C
662 To compile this driver as a module, choose M here: the module will be
667 depends on I2C
670 amplifier with 12-bits ADC interface.
672 To compile this driver as a module, choose M here: the module will be
677 depends on SPI
684 This driver can also be built as a module. If so, the module will be
689 depends on I2C
695 This driver can also be built as a module. If so, the module will be
700 depends on SPI
705 This driver can also be built as a module. If so, the module will be
710 depends on ARCH_MEDIATEK || COMPILE_TEST
711 depends on HAS_IOMEM
718 This driver can also be built as a module. If so, the module will be
723 depends on MCB
725 Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
728 This driver can also be built as a module. If so, the module will be
734 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
740 To compile this driver as a module, choose M here: the
741 module will be called meson_saradc.
745 depends on MFD_MP2629
755 depends on I2C
759 To compile this driver as a module, choose M here: the
760 module will be called nau7802.
764 depends on ARCH_NPCM || COMPILE_TEST
765 depends on HAS_IOMEM
769 This driver can also be built as a module. If so, the module
774 depends on MFD_PALMAS
785 depends on MFD_PM8XXX
791 To compile this driver as a module, choose M here: the module
792 will be called qcom-pm8xxx-xoadc.
796 depends on SPMI
805 To compile this driver as a module, choose M here: the module will
806 be called qcom-spmi-iadc.
810 depends on SPMI
816 The driver supports multiple channels read. The VADC is a 15-bit
817 sigma-delta ADC. Some of the channels are internally used for
820 To compile this driver as a module, choose M here: the module will
821 be called qcom-spmi-vadc.
825 depends on SPMI
831 The driver supports multiple channels read. The ADC is a 16-bit
832 sigma-delta ADC. The hardware supports calibrated results for
834 power, on board system thermistors connected to the PMIC ADC,
837 hardware supports internal pull-up for thermistors and can choose between
840 To compile this driver as a module, choose M here: the module will
841 be called qcom-spmi-adc5.
844 tristate "Renesas R-Car GyroADC driver"
845 depends on ARCH_RCAR_GEN2 || COMPILE_TEST
848 R-Car Gen2 SoCs. This block is a simple SPI offload engine for
849 reading data out of attached compatible ADCs in a round-robin
851 depending on which ADCs are attached.
853 To compile this driver as a module, choose M here: the
854 module will be called rcar-gyroadc.
858 depends on MFD_RN5T618
863 This driver can also be built as a module. If so, the module
864 will be called rn5t618-adc.
868 depends on ARCH_ROCKCHIP || COMPILE_TEST
869 depends on RESET_CONTROLLER
876 To compile this driver as a module, choose M here: the
877 module will be called rockchip_saradc.
881 depends on MFD_SC27XX_PMIC || COMPILE_TEST
886 This driver can also be built as a module. If so, the module
891 depends on PLAT_SPEAR || COMPILE_TEST
892 depends on HAS_IOMEM
897 To compile this driver as a module, choose M here: the
898 module will be called spear_adc.
902 depends on OF
909 This driver can also be built as a module. If so, the module
914 depends on ARCH_STM32 || COMPILE_TEST
915 depends on OF
916 depends on REGULATOR
917 depends on HAS_IOMEM
924 STM32 analog-to-digital converter (ADC).
926 This driver can also be built as a module. If so, the module
927 will be called stm32-adc-core.
931 depends on STM32_ADC_CORE
936 This driver can also be built as a module. If so, the module
937 will be called stm32-adc.
941 depends on (ARCH_STM32 && OF) || COMPILE_TEST
948 This driver can also be built as a module. If so, the module
949 will be called stm32-dfsdm-core.
953 depends on (ARCH_STM32 && OF) || COMPILE_TEST
963 This driver can also be built as a module. If so, the module
964 will be called stm32-dfsdm-adc.
968 depends on OF && MFD_STMPE
971 built-in ADC block (stmpe811).
975 depends on PC104 && X86
982 This driver supports the 16 channels of single-ended (8 channels of
987 array module parameter.
991 depends on IIO
992 depends on MFD_SUN4I_GPADC || MACH_SUN8I
993 depends on THERMAL || !THERMAL_OF
1005 To compile this driver as a module, choose M here: the module will be
1006 called sun4i-gpadc-iio.
1010 depends on I2C
1017 This driver can also be built as a module. If so, the module will be
1018 called ti-adc081c.
1022 depends on SPI
1029 This driver can also be built as a module. If so, the module will be
1030 called ti-adc0832.
1034 depends on SPI
1041 This driver can also be built as a module. If so, the module will be
1042 called ti-adc084s021.
1046 depends on SPI
1053 This driver can also be built as a module. If so, the module will be
1054 called ti-adc12138.
1058 depends on SPI
1065 To compile this driver as a module, choose M here: the module will
1066 be called ti-adc108s102.
1070 depends on SPI
1075 This driver can also be built as a module. If so, the module will be
1076 called ti-adc128s052.
1079 tristate "Texas Instruments ADC161S626 1-channel differential ADC"
1080 depends on SPI
1087 This driver can also be built as a module. If so, the module will be
1088 called ti-adc161s626.
1092 depends on I2C
1100 This driver can also be built as a module. If so, the module will be
1101 called ti-ads1015.
1105 depends on SPI && GPIOLIB
1113 To compile this driver as a module, choose M here: the
1114 module will be called ti-ads7950.
1118 depends on SPI && OF
1123 This driver can also be built as a module. If so, the module will be
1124 called ti-ads8344.
1128 depends on SPI && OF
1133 This driver can also be built as a module. If so, the module will be
1134 called ti-ads8688.
1138 depends on SPI && OF
1143 This driver can also be built as a module. If so, the module will be
1144 called ti-ads124s08.
1148 depends on MFD_TI_AM335X_TSCADC && HAS_DMA
1155 To compile this driver as a module, choose M here: the module will be
1160 depends on SPI
1167 This driver can also be built as a module. If so, the module will be
1168 called ti-tlc4541.
1172 depends on TWL4030_CORE
1174 This driver provides support for Triton TWL4030-MADC. The
1177 This driver can also be built as a module. If so, the module will be
1178 called twl4030-madc.
1182 depends on TWL4030_CORE
1191 This driver can also be built as a module. If so, the module will be
1192 called twl6030-gpadc.
1196 depends on OF
1197 depends on HAS_IOMEM
1201 Say yes here to support for Vybrid board analog-to-digital converter.
1204 This driver can also be built as a module. If so, the module will be
1209 depends on MFD_VIPERBOARD && USB
1214 To compile this driver as a module, choose M here: the module will be
1219 depends on HAS_IOMEM
1224 both the ZYNQ interface to the XADC as well as the AXI-XADC interface.
1226 The driver can also be build as a module. If so, the module will be called
1227 xilinx-xadc.