| /kernel/linux/linux-5.10/arch/x86/include/asm/ |
| D | apb_timer.h | 18 #define LNW_SCU_ADDR 0xFF100000
19 #define LNW_EXT_TIMER_OFFSET 0x1B800
21 #define LNW_EXT_TIMER_PGOFFSET 0x800
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mtd/ |
| D | arasan,nand-controller.yaml | 51 reg = <0xff100000 0x1000>;
55 interrupts = <0 14 4>;
57 #size-cells = <0>;
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mtd/ |
| D | arasan,nand-controller.yaml | 54 reg = <0xff100000 0x1000>;
58 interrupts = <0 14 4>;
60 #size-cells = <0>;
|
| /kernel/linux/linux-6.6/arch/arc/boot/dts/ |
| D | abilis_tb100_dvk.dts | 17 bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
24 reg = <0x80000000 0x08000000>; /* 128M */
30 pinctrl-0 = <&pctl_uart0>;
56 gpios = <&gpioi 0 0>;
61 gpios = <&gpioi 1 0>;
66 gpios = <&gpioi 2 0>;
71 gpios = <&gpioi 3 0>;
76 gpios = <&gpioi 4 0>;
81 gpios = <&gpioi 5 0>;
86 gpios = <&gpioi 6 0>;
[all …]
|
| D | abilis_tb101_dvk.dts | 17 bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
24 reg = <0x80000000 0x08000000>; /* 128M */
30 pinctrl-0 = <&pctl_uart0>;
56 gpios = <&gpioi 0 0>;
61 gpios = <&gpioi 1 0>;
66 gpios = <&gpioi 2 0>;
71 gpios = <&gpioi 3 0>;
76 gpios = <&gpioi 4 0>;
81 gpios = <&gpioi 5 0>;
86 gpios = <&gpioi 6 0>;
[all …]
|
| D | abilis_tb10x.dtsi | 18 #size-cells = <0>;
19 cpu@0 {
22 reg = <0>;
44 ranges = <0xfe000000 0xfe000000 0x02000000
45 0x000f0000 0x000f0000 0x00010000>;
50 #clock-cells = <0>;
55 #clock-cells = <0>;
61 #clock-cells = <0>;
69 reg = <0xff10601c 0x4>;
79 reg = <0xfe002000 0x20>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arc/boot/dts/ |
| D | abilis_tb101_dvk.dts | 17 bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
24 reg = <0x80000000 0x08000000>; /* 128M */
30 pinctrl-0 = <&pctl_uart0>;
56 gpios = <&gpioi 0 0>;
61 gpios = <&gpioi 1 0>;
66 gpios = <&gpioi 2 0>;
71 gpios = <&gpioi 3 0>;
76 gpios = <&gpioi 4 0>;
81 gpios = <&gpioi 5 0>;
86 gpios = <&gpioi 6 0>;
[all …]
|
| D | abilis_tb100_dvk.dts | 17 bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
24 reg = <0x80000000 0x08000000>; /* 128M */
30 pinctrl-0 = <&pctl_uart0>;
56 gpios = <&gpioi 0 0>;
61 gpios = <&gpioi 1 0>;
66 gpios = <&gpioi 2 0>;
71 gpios = <&gpioi 3 0>;
76 gpios = <&gpioi 4 0>;
81 gpios = <&gpioi 5 0>;
86 gpios = <&gpioi 6 0>;
[all …]
|
| D | abilis_tb10x.dtsi | 18 #size-cells = <0>;
19 cpu@0 {
22 reg = <0>;
44 ranges = <0xfe000000 0xfe000000 0x02000000
45 0x000f0000 0x000f0000 0x00010000>;
50 #clock-cells = <0>;
55 #clock-cells = <0>;
61 #clock-cells = <0>;
69 reg = <0xff10601c 0x4>;
79 reg = <0xfe002000 0x20>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-pxa/include/mach/ |
| D | palmtx.h | 71 #define PALMTX_PCMCIA_PHYS 0x28000000
72 #define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000)
73 #define PALMTX_PCMCIA_SIZE 0x100000
75 #define PALMTX_PHYS_RAM_START 0xa0000000
76 #define PALMTX_PHYS_IO_START 0x40000000
78 #define PALMTX_STR_BASE 0xa0200000
80 #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
85 #define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000)
86 #define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000)
95 #define PALMTX_BAT_MAX_CURRENT 0 /* unknown */
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pinctrl/ |
| D | abilis,tb10x-iomux.txt | 54 reg = <0xFF10601c 0x4>;
64 reg = <0xFF100000 0x100>;
70 pinctrl-0 = <&pctl_uart0>;
74 reg = <0xFF140000 0x1000>;
78 gpio-ranges = <&iomux 0 0>;
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/pinctrl/ |
| D | abilis,tb10x-iomux.txt | 54 reg = <0xFF10601c 0x4>;
64 reg = <0xFF100000 0x100>;
70 pinctrl-0 = <&pctl_uart0>;
74 reg = <0xFF140000 0x1000>;
78 gpio-ranges = <&iomux 0 0>;
|
| /kernel/linux/linux-5.10/arch/m68k/include/asm/ |
| D | bvme6000hw.h | 11 #define BVME_PIT_BASE 0xffa00000
47 #define BVME_RTC_BASE 0xff900000
86 #define BVME_I596_BASE 0xff100000
88 #define BVME_ETHIRQ_REG 0xff20000b
90 #define BVME_LOCAL_IRQ_STAT 0xff20000f
92 #define BVME_ETHERR 0x02
93 #define BVME_ABORT_STATUS 0x08
95 #define BVME_NCR53C710_BASE 0xff000000
97 #define BVME_SCC_A_ADDR 0xffb0000b
98 #define BVME_SCC_B_ADDR 0xffb00003
[all …]
|
| /kernel/linux/linux-6.6/arch/m68k/include/asm/ |
| D | bvme6000hw.h | 11 #define BVME_PIT_BASE 0xffa00000
47 #define BVME_RTC_BASE 0xff900000
86 #define BVME_I596_BASE 0xff100000
88 #define BVME_ETHIRQ_REG 0xff20000b
90 #define BVME_LOCAL_IRQ_STAT 0xff20000f
92 #define BVME_ETHERR 0x02
93 #define BVME_ABORT_STATUS 0x08
95 #define BVME_NCR53C710_BASE 0xff000000
97 #define BVME_SCC_A_ADDR 0xffb0000b
98 #define BVME_SCC_B_ADDR 0xffb00003
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/realtek/ |
| D | rtd16xx.dtsi | 23 reg = <0x2f000 0x1000>;
27 reg = <0x1ffe000 0x4000>;
31 reg = <0x10100000 0xf00000>;
38 #size-cells = <0>;
40 cpu0: cpu@0 {
43 reg = <0x0>;
51 reg = <0x100>;
59 reg = <0x200>;
67 reg = <0x300>;
75 reg = <0x400>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/realtek/ |
| D | rtd16xx.dtsi | 23 reg = <0x2f000 0x1000>;
27 reg = <0x1ffe000 0x4000>;
31 reg = <0x10100000 0xf00000>;
38 #size-cells = <0>;
40 cpu0: cpu@0 {
43 reg = <0x0>;
51 reg = <0x100>;
59 reg = <0x200>;
67 reg = <0x300>;
75 reg = <0x400>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/vfp/ |
| D | vfpmodule.c | 109 memset(vfp, 0, sizeof(union vfp_state)); in vfp_thread_flush()
220 current->thread.error_code = 0; in vfp_raise_sigfpe()
233 pr_err("VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", in vfp_panic()
235 for (i = 0; i < 32; i += 2) in vfp_panic()
236 pr_err("VFP: s%2u: 0x%08x s%2u: 0x%08x\n", in vfp_panic()
245 int si_code = 0; in vfp_raise_exceptions()
291 pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr); in vfp_emulate_instruction()
333 * 0 1 x - synchronous exception in VFP_bounce()
334 * 1 x 0 - asynchronous exception in VFP_bounce()
336 * 0 0 1 - synchronous on VFP9 (non-standard subarch 1 in VFP_bounce()
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/vfp/ |
| D | vfpmodule.c | 109 memset(vfp, 0, sizeof(union vfp_state)); in vfp_thread_flush()
220 current->thread.error_code = 0; in vfp_raise_sigfpe()
233 pr_err("VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", in vfp_panic()
235 for (i = 0; i < 32; i += 2) in vfp_panic()
236 pr_err("VFP: s%2u: 0x%08x s%2u: 0x%08x\n", in vfp_panic()
245 int si_code = 0; in vfp_raise_exceptions()
291 pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr); in vfp_emulate_instruction()
334 * 0 1 x - synchronous exception in VFP_bounce()
335 * 1 x 0 - asynchronous exception in VFP_bounce()
337 * 0 0 1 - synchronous on VFP9 (non-standard subarch 1 in VFP_bounce()
[all …]
|
| /kernel/linux/linux-6.6/net/ipv6/ |
| D | ioam6_iptunnel.c | 25 #define IOAM6_MASK_SHORT_FIELDS 0xff100000
26 #define IOAM6_MASK_WIDE_FIELDS 0xe00000
91 trace->nodelen = 0; in ioam6_validate_trace_hdr()
121 if (err < 0) in ioam6_build_state()
175 atomic_set(&ilwt->pkt_cnt, 0); in ioam6_build_state()
185 tuninfo->pad[0] = IPV6_TLV_PADN; in ioam6_build_state()
203 return 0; in ioam6_build_state()
219 return 0; in ioam6_do_fill()
362 memset(&fl6, 0, sizeof(fl6)); in ioam6_output()
|
| /kernel/linux/linux-5.10/arch/arm/kernel/ |
| D | entry-armv.S | 147 .macro svc_entry, stack_hole=0, trace=1, uaccess=1
195 svc_entry uaccess=0
211 teq r8, #0 @ if preempt count != 0
212 movne r0, #0 @ force flags to 0
281 svc_entry trace=0
309 svc_entry trace=0
355 ATRAP( mrc p15, 0, r7, c1, c0, 0)
365 ATRAP( ldr r8, [r8, #0])
386 ATRAP( mcrne p15, 0, r8, c1, c0, 0)
397 ct_user_exit save = 0
[all …]
|
| /kernel/linux/linux-6.6/drivers/hid/ |
| D | hid-lenovo.c | 54 /* 0: Up
67 #define TP10UBKBD_FN_LOCK_LED 0x54
68 #define TP10UBKBD_MUTE_LED 0x64
69 #define TP10UBKBD_MICMUTE_LED 0x74
82 data->led_report[0] = TP10UBKBD_LED_OUTPUT_REPORT; in lenovo_led_set_tp10ubkbd()
85 ret = hid_hw_raw_request(hdev, data->led_report[0], data->led_report, 3, in lenovo_led_set_tp10ubkbd()
91 ret = ret < 0 ? ret : -EIO; in lenovo_led_set_tp10ubkbd()
93 ret = 0; in lenovo_led_set_tp10ubkbd()
111 0x05, 0x88, /* Usage Page (Vendor Usage Page 0x88) */
112 0x09, 0x01, /* Usage (Vendor Usage 0x01) */
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-pxa/ |
| D | mioa701.c | 60 /* Backlight PWM 0 */
171 PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
217 KEY(0, 0, KEY_UP),
218 KEY(0, 1, KEY_RIGHT),
219 KEY(0, 2, KEY_MEDIA),
220 KEY(1, 0, KEY_DOWN),
223 KEY(2, 0, KEY_LEFT),
243 { .code = (key), .gpio = (_gpio), .active_low = 0, \
247 MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
248 MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
[all …]
|
| /kernel/linux/linux-5.10/drivers/hid/ |
| D | hid-lenovo.c | 53 /* 0: Up
66 #define TP10UBKBD_FN_LOCK_LED 0x54
67 #define TP10UBKBD_MUTE_LED 0x64
68 #define TP10UBKBD_MICMUTE_LED 0x74
81 data->led_report[0] = TP10UBKBD_LED_OUTPUT_REPORT; in lenovo_led_set_tp10ubkbd()
84 ret = hid_hw_raw_request(hdev, data->led_report[0], data->led_report, 3, in lenovo_led_set_tp10ubkbd()
90 ret = ret < 0 ? ret : -EIO; in lenovo_led_set_tp10ubkbd()
92 ret = 0; in lenovo_led_set_tp10ubkbd()
110 0x05, 0x88, /* Usage Page (Vendor Usage Page 0x88) */
111 0x09, 0x01, /* Usage (Vendor Usage 0x01) */
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp.dtsi | 29 #size-cells = <0>;
31 cpu0: cpu@0 {
36 reg = <0x0>;
45 reg = <0x1>;
55 reg = <0x2>;
65 reg = <0x3>;
80 CPU_SLEEP_0: cpu-sleep-0 {
82 arm,psci-suspend-param = <0x40000000>;
123 reg = <0x0 0x3ed00000 0x0 0x40000>;
128 reg = <0x0 0x3ef00000 0x0 0x40000>;
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/probes/ |
| D | decode-thumb.c | 20 DECODE_REJECT (0xfe4f0000, 0xe80f0000),
24 DECODE_REJECT (0xffc00000, 0xe8000000),
27 DECODE_REJECT (0xffc00000, 0xe9800000),
30 DECODE_REJECT (0xfe508000, 0xe8008000),
32 DECODE_REJECT (0xfe50c000, 0xe810c000),
34 DECODE_REJECT (0xfe402000, 0xe8002000),
40 DECODE_CUSTOM (0xfe400000, 0xe8000000, PROBES_T32_LDMSTM),
50 DECODE_OR (0xff600000, 0xe8600000),
53 DECODE_EMULATEX (0xff400000, 0xe9400000, PROBES_T32_LDRDSTRD,
54 REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)),
[all …]
|