| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/power/supply/ |
| D | active-semi,act8945a-charger.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Active-semi ACT8945A Charger Function
10 - Sebastian Reichel <sre@kernel.org>
13 - $ref: power-supply.yaml#
17 const: active-semi,act8945a-charger
22 active-semi,chglev-gpios:
26 active-semi,lbo-gpios:
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/power/supply/ |
| D | act8945a-charger.txt | 1 Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
4 - compatible: "active-semi,act8945a-charger".
5 - active-semi,chglev-gpios: charge current level phandle with args
7 - active-semi,lbo-gpios: specify the low battery voltage detect phandle
9 - interrupts: <a b> where a is the interrupt number and b is a
14 - active-semi,input-voltage-threshold-microvolt: unit: mV;
15 Specifies the charger's input over-voltage threshold value;
17 - active-semi,precondition-timeout: unit: minutes;
21 - active-semi,total-timeout: unit: hours;
28 compatible = "active-semi,act8945a";
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/regulator/ |
| D | active-semi,act8945a.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Active-semi ACT8945a regulator
10 - Paul Cercueil <paul@crapouillou.net>
14 const: active-semi,act8945a
19 system-power-controller:
25 active-semi,vsel-high:
42 vp1-supply:
[all …]
|
| D | active-semi,act8865.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Active-semi ACT8865 regulator
10 - Paul Cercueil <paul@crapouillou.net>
14 const: active-semi,act8865
19 system-power-controller:
25 active-semi,vsel-high:
42 vp1-supply:
[all …]
|
| D | active-semi,act8600.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Active-semi ACT8600 regulator
10 - Paul Cercueil <paul@crapouillou.net>
14 const: active-semi,act8600
19 system-power-controller:
25 active-semi,vsel-high:
42 vp1-supply:
[all …]
|
| D | active-semi,act8846.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Active-semi ACT8846 regulator
10 - Paul Cercueil <paul@crapouillou.net>
14 const: active-semi,act8846
19 system-power-controller:
25 active-semi,vsel-high:
31 inl1-supply:
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mfd/ |
| D | act8945a.txt | 1 Device-Tree bindings for Active-semi ACT8945A MFD driver
4 - compatible: "active-semi,act8945a".
5 - reg: the I2C slave address for the ACT8945A chip
8 - a regulators: see ../regulator/act8945a-regulator.txt
9 - a charger: see ../power/act8945a-charger.txt
13 compatible = "active-semi,act8945a";
16 active-semi,vsel-high;
20 regulator-name = "VDD_1V35";
21 regulator-min-microvolt = <1350000>;
22 regulator-max-microvolt = <1350000>;
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mfd/ |
| D | act8945a.txt | 1 Device-Tree bindings for Active-semi ACT8945A MFD driver
4 - compatible: "active-semi,act8945a".
5 - reg: the I2C slave address for the ACT8945A chip
8 - a regulators: see ../regulator/act8945a-regulator.txt
9 - a charger: see ../power/act8945a-charger.txt
13 compatible = "active-semi,act8945a";
16 active-semi,vsel-high;
20 regulator-name = "VDD_1V35";
21 regulator-min-microvolt = <1350000>;
22 regulator-max-microvolt = <1350000>;
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
| D | act8865-regulator.txt | 2 -------------------
5 - compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
6 - reg: I2C slave address
9 - system-power-controller: Telling whether or not this pmic is controlling
10 the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
11 - active-semi,vsel-high: Indicates the VSEL pin is high.
15 - for act8600:
16 - vp1-supply: The input supply for DCDC_REG1
17 - vp2-supply: The input supply for DCDC_REG2
18 - vp3-supply: The input supply for DCDC_REG3
[all …]
|
| D | act8945a-regulator.txt | 1 Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
4 - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
7 - active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
8 If this property is missing, assume the VSEL pin is set to logic-low.
11 - vp1-supply: The input supply for REG_DCDC1
12 - vp2-supply: The input supply for REG_DCDC2
13 - vp3-supply: The input supply for REG_DCDC3
14 - inl45-supply: The input supply for REG_LDO1 and REG_LDO2
15 - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
18 regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/media/i2c/ |
| D | tda1997x.txt | 1 Device-Tree bindings for the NXP TDA1997x HDMI receiver
6 - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
7 - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
8 - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
9 - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
10 - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
11 - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
12 - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
13 - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
16 - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/media/i2c/ |
| D | tda1997x.txt | 1 Device-Tree bindings for the NXP TDA1997x HDMI receiver
6 - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
7 - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
8 - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
9 - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
10 - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
11 - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
12 - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
13 - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
16 - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
[all …]
|
| /kernel/linux/linux-6.6/drivers/mfd/ |
| D | act8945a.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * MFD driver for Active-semi ACT8945a PMIC
18 .name = "act8945a-regulator",
21 .name = "act8945a-charger",
22 .of_compatible = "active-semi,act8945a-charger",
39 dev_err(&i2c->dev, "regmap init failed: %d\n", ret); in act8945a_i2c_probe()
45 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, in act8945a_i2c_probe()
49 dev_err(&i2c->dev, "Failed to add sub devices\n"); in act8945a_i2c_probe()
63 { .compatible = "active-semi,act8945a", },
89 MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
|
| /kernel/linux/linux-5.10/drivers/mfd/ |
| D | act8945a.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * MFD driver for Active-semi ACT8945a PMIC
18 .name = "act8945a-regulator",
21 .name = "act8945a-charger",
22 .of_compatible = "active-semi,act8945a-charger",
40 dev_err(&i2c->dev, "regmap init failed: %d\n", ret); in act8945a_i2c_probe()
46 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, in act8945a_i2c_probe()
50 dev_err(&i2c->dev, "Failed to add sub devices\n"); in act8945a_i2c_probe()
64 { .compatible = "active-semi,act8945a", },
90 MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
|
| /kernel/linux/linux-5.10/drivers/power/supply/ |
| D | act8945a_charger.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Power supply driver for the Active-semi ACT8945A PMIC
19 static const char *act8945a_charger_manufacturer = "Active-semi";
214 int lbo_level = gpiod_get_value(charger->lbo_gpio); in act8945a_get_capacity_level()
268 * Riset(K) = 2336 * (1V/Ichg(mA)) - 0.205
282 int chgin_level = gpiod_get_value(charger->chglev_gpio); in act8945a_get_current_max()
347 struct regmap *regmap = charger->regmap; in act8945a_charger_get_property()
352 ret = act8945a_get_charger_state(regmap, &val->intval); in act8945a_charger_get_property()
355 ret = act8945a_get_charge_type(regmap, &val->intval); in act8945a_charger_get_property()
358 val->intval = POWER_SUPPLY_TECHNOLOGY_LION; in act8945a_charger_get_property()
[all …]
|
| /kernel/linux/linux-6.6/drivers/power/supply/ |
| D | act8945a_charger.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Power supply driver for the Active-semi ACT8945A PMIC
19 static const char *act8945a_charger_manufacturer = "Active-semi";
214 int lbo_level = gpiod_get_value(charger->lbo_gpio); in act8945a_get_capacity_level()
268 * Riset(K) = 2336 * (1V/Ichg(mA)) - 0.205
282 int chgin_level = gpiod_get_value(charger->chglev_gpio); in act8945a_get_current_max()
347 struct regmap *regmap = charger->regmap; in act8945a_charger_get_property()
352 ret = act8945a_get_charger_state(regmap, &val->intval); in act8945a_charger_get_property()
355 ret = act8945a_get_charge_type(regmap, &val->intval); in act8945a_charger_get_property()
358 val->intval = POWER_SUPPLY_TECHNOLOGY_LION; in act8945a_charger_get_property()
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/microchip/ |
| D | at91-sama5d2_xplained.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
8 /dts-v1/;
10 #include "sama5d2-pinfunc.h"
11 #include <dt-bindings/mfd/atmel-flexcom.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
18 compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
28 stdout-path = "serial0:115200n8";
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | at91-sama5d2_xplained.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
8 /dts-v1/;
10 #include "sama5d2-pinfunc.h"
11 #include <dt-bindings/mfd/atmel-flexcom.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
18 compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
28 stdout-path = "serial0:115200n8";
[all …]
|
| /kernel/linux/linux-5.10/drivers/regulator/ |
| D | act8865-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
5 * http://www.active-semi.com/products/power-management-units/act88xx/
22 #include <dt-bindings/regulator/active-semi,8865-regulator.h>
124 #define ACT8865_ENA 0x80 /* ON - [7] */
125 #define ACT8865_DIS 0x40 /* DIS - [6] */
127 #define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
130 #define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
131 #define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
239 struct regmap *regmap = rdev->regmap; in act8865_set_suspend_state()
[all …]
|
| D | act8945a-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Voltage regulation driver for active-semi ACT8945A PMIC
16 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
52 #define ACT8945A_ENA 0x80 /* ON - [7] */
53 #define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */
84 struct regmap *regmap = rdev->regmap; in act8945a_set_suspend_state()
118 return -EINVAL; in act8945a_set_suspend_state()
157 struct regmap *regmap = rdev->regmap; in act8945a_set_mode()
184 return -EINVAL; in act8945a_set_mode()
197 return -EINVAL; in act8945a_set_mode()
[all …]
|
| /kernel/linux/linux-6.6/drivers/regulator/ |
| D | act8865-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
5 * http://www.active-semi.com/products/power-management-units/act88xx/
22 #include <dt-bindings/regulator/active-semi,8865-regulator.h>
124 #define ACT8865_ENA 0x80 /* ON - [7] */
125 #define ACT8865_DIS 0x40 /* DIS - [6] */
127 #define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
130 #define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
131 #define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
239 struct regmap *regmap = rdev->regmap; in act8865_set_suspend_state()
[all …]
|
| D | act8945a-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Voltage regulation driver for active-semi ACT8945A PMIC
16 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
52 #define ACT8945A_ENA 0x80 /* ON - [7] */
53 #define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */
84 struct regmap *regmap = rdev->regmap; in act8945a_set_suspend_state()
118 return -EINVAL; in act8945a_set_suspend_state()
157 struct regmap *regmap = rdev->regmap; in act8945a_set_mode()
184 return -EINVAL; in act8945a_set_mode()
197 return -EINVAL; in act8945a_set_mode()
[all …]
|
| /kernel/linux/linux-5.10/drivers/irqchip/ |
| D | irq-owl-sirq.c | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Actions Semi Owl SoCs SIRQ interrupt controller driver
5 * Copyright (C) 2014 Actions Semi Inc.
6 * David Liu <liuwei@actions-semi.com>
19 #include <dt-bindings/interrupt-controller/arm-gic.h>
98 val = readl_relaxed(data->base + data->params->reg_offset[index]); in owl_sirq_read_extctl()
99 if (data->params->reg_shared) in owl_sirq_read_extctl()
110 if (data->params->reg_shared) { in owl_sirq_write_extctl()
111 val = readl_relaxed(data->base + data->params->reg_offset[index]); in owl_sirq_write_extctl()
116 writel_relaxed(extctl, data->base + data->params->reg_offset[index]); in owl_sirq_write_extctl()
[all …]
|
| /kernel/linux/linux-6.6/drivers/irqchip/ |
| D | irq-owl-sirq.c | 1 // SPDX-License-Identifier: GPL-2.0+
3 * Actions Semi Owl SoCs SIRQ interrupt controller driver
5 * Copyright (C) 2014 Actions Semi Inc.
6 * David Liu <liuwei@actions-semi.com>
19 #include <dt-bindings/interrupt-controller/arm-gic.h>
98 val = readl_relaxed(data->base + data->params->reg_offset[index]); in owl_sirq_read_extctl()
99 if (data->params->reg_shared) in owl_sirq_read_extctl()
110 if (data->params->reg_shared) { in owl_sirq_write_extctl()
111 val = readl_relaxed(data->base + data->params->reg_offset[index]); in owl_sirq_write_extctl()
116 writel_relaxed(extctl, data->base + data->params->reg_offset[index]); in owl_sirq_write_extctl()
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/power/ |
| D | power-controller.txt | 3 Power-management integrated circuits or miscellaneous hardware components are
7 standard property "system-power-controller" in its device node. This property
15 compatible = "active-semi,act8846";
16 system-power-controller;
|