Lines Matching +full:rate +full:- +full:idle +full:- +full:ms

1 /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
49 /* bclk idle */
55 /* SSP Configuration Request - SOF_IPC_DAI_SSP_CONFIG */
82 	uint32_t bclk_delay;	/* guaranteed time (ms) for which BCLK
87 /* HDA Configuration Request - SOF_IPC_DAI_HDA_CONFIG */
91 	uint32_t rate;  member
95 /* ALH Configuration Request - SOF_IPC_DAI_ALH_CONFIG */
99 	uint32_t rate;  member
106 /* DMIC Configuration Request - SOF_IPC_DAI_DMIC_CONFIG */
149  * range 1.0 - 3.2 MHz is usually supported microphones. Some microphones are
150  * multi-mode capable and there may be denied mic clock frequencies between
152  * avoid the driver to set clock to an illegal rate.
154  * The duty cycle could be set to 48-52% if not known. Generally these
158  * The microphone clock needs to be usually about 50-80 times the used audio
159  * sample rate. With highest sample rates above 48 kHz this can relaxed
167  * met. The unit for both is microseconds (us). Exceed of 100 ms will be
177 	uint32_t fifo_fs;	/**< FIFO sample rate in Hz (8000..96000) */
190 	uint32_t unmute_ramp_time;  /**< Length of logarithmic gain ramp (ms) */