5   Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
602   and Bus Probe Information to be checked for potential BusLogic MultiMaster
604   machines as well as from the list of standard BusLogic MultiMaster ISA
605   I/O Addresses.  It returns the number of PCI MultiMaster Host Adapters found.
622 	   Iterate over the MultiMaster PCI Host Adapters.  For each  in blogic_init_mm_probeinfo()
627 	   The MultiMaster BIOS will first recognize a host adapter at  in blogic_init_mm_probeinfo()
663 …blogic_err("BusLogic: Base Address0 0x%lX not I/O for MultiMaster Host Adapter\n", NULL, base_addr…  in blogic_init_mm_probeinfo()
668 …blogic_err("BusLogic: Base Address1 0x%lX not Memory for MultiMaster Host Adapter\n", NULL, base_a…  in blogic_init_mm_probeinfo()
673 			blogic_err("BusLogic: IRQ Channel %d invalid for MultiMaster Host Adapter\n", NULL, irq_ch);  in blogic_init_mm_probeinfo()
678 			blogic_notice("BusLogic: PCI MultiMaster Host Adapter detected at\n", NULL);  in blogic_init_mm_probeinfo()
705 		   For the first MultiMaster Host Adapter enumerated,  in blogic_init_mm_probeinfo()
731 		   Determine whether this MultiMaster Host Adapter has its  in blogic_init_mm_probeinfo()
734 		   MultiMaster Host Adapter and must be recognized first.  in blogic_init_mm_probeinfo()
736 		   after any Primary MultiMaster Host Adapter is probed.  in blogic_init_mm_probeinfo()
766 	   option is ON for the first enumerated MultiMaster Host Adapter,  in blogic_init_mm_probeinfo()
768 	   MultiMaster BIOS will recognize MultiMaster Host Adapters in  in blogic_init_mm_probeinfo()
771 	   If this option is OFF, then the MultiMaster BIOS will recognize  in blogic_init_mm_probeinfo()
772 	   MultiMaster Host Adapters in the order they are enumerated by  in blogic_init_mm_probeinfo()
779 	   Iterate over the older non-compliant MultiMaster PCI Host Adapters,  in blogic_init_mm_probeinfo()
913   list of standard BusLogic MultiMaster ISA I/O Addresses.  By default, if both
914   FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
916   controlled by the first PCI MultiMaster Host Adapter, in which case
917   MultiMaster Host Adapters will be probed first.  The BusLogic Driver Options
925 	   If a PCI BIOS is present, interrogate it for MultiMaster and  in blogic_init_probeinfo_list()
927 	   ISA MultiMaster probe.  in blogic_init_probeinfo_list()
961 				   PCI MultiMaster Host Adapter, then reverse  in blogic_init_probeinfo_list()
962 				   the probe order so that MultiMaster Host  in blogic_init_probeinfo_list()
1220 		blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n", adapter,  in blogic_checkadapter()
1357 	   BusLogic MultiMaster Host Adapters can be identified by their  in blogic_rdconfig()
1465 	   Termination Information from "W" series MultiMaster Host Adapters.  in blogic_rdconfig()
1485 	   AutoSCSI data from "W" and "C" series MultiMaster Host Adapters.  in blogic_rdconfig()
1524 	   series MultiMaster Host Adapters.  in blogic_rdconfig()
1589 	   all "W" series MultiMaster Host Adapters, on "C" series  in blogic_rdconfig()
1590 	   MultiMaster Host Adapters with firmware version 4.22 and above,  in blogic_rdconfig()
1591 	   and on "S" series MultiMaster Host Adapters with firmware version  in blogic_rdconfig()
1626 	   Initialize parameters common to MultiMaster and FlashPoint  in blogic_rdconfig()
3129 		   Attempt to Abort this CCB.  MultiMaster Firmware versions  in DEF_SCSI_QCMD()
3231   series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3232   series MultiMaster Host Adapters.  With Extended Translation enabled, drives