Lines Matching +full:- +full:- +full:parallel
1 .TH sane\-hp 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
2 .IX sane\-hp
4 sane\-hp \- SANE backend for HP ScanJet scanners
7 .B sane\-hp
17 ---------- ----------- ----------
18 ScanJet Plus C9195A HP Parallel Interface Card
28 ScanJet 5100C C5190A parallel port
29 ScanJet 5200C C7190A 3846 parallel port/USB
41 Support for models 5100C/5200C connected to the parallel port requires
45 .IR http://penguin-breeder.org/kernel/download/ .
54 .B sane\-hp
55 backend no longer supports OfficeJet multi-function peripherals.
62 Because Hewlett-Packard does no longer produce scanners that support
66 .B sane\-hp
68 .IR http://www.sane\-project.org/ .
69 You can also watch the sane\-devel mailing list at
70 .IR http://www.sane\-project.org/mailing\-lists.html .
84 is the UNIX path-name for the special device that corresponds to the
93 that corresponds to the parallel interface card that was shipped with the
98 .I ftp://rvs.ctrl\-c.liu.se/pub/wingel/hpscan
125 .B connect\-scsi
127 Input/output is performed using SCSI-commands. This is the default.
129 option connect\-scsi must be specified. Otherwise it is assumed that
133 .B connect\-device
142 necessary to specify option connect\-device.
145 .B enable\-image\-buffering
150 .B dumb\-read
152 problems may occur with certain SCSI-to-USB converters or Buslogic SCSI cards.
164 option connect\-device
179 .I @LIBDIR@/libsane\-hp.a
182 .I @LIBDIR@/libsane\-hp.so
186 .I $HOME/.sane/calib-hp:<device>.dat
197 semi-colon (`;'). If this variable is not set, the configuration file
231 For each type of connection (connect\-scsi, connect\-usb, connect\-device)
235 Keeping connection open to SCSI-devices can result in errors during device IO
236 when the scanner has not been used for some time. By default, USB-connections
241 Only supported for non-SCSI devices. Default: 1 retry. Time between retries
287 .B Parallel scanner support
288 Beside the ScanJet Plus which came with its own parallel interface card,
290 These scanners are using an internal parallel-to-SCSI converter which
291 is supported by the ppSCSI-driver (see above).
302 The sane\-hp backend was written by Geoffrey T. Dairiki.