Lines Matching +full:- +full:- +full:parallel

1 .TH sane\-mustek 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
2 .IX sane\-mustek
4 sane\-mustek \- SANE backend for Mustek SCSI flatbed scanners (and some other devices)
7 .B sane\-mustek
14 Paragon MFS-6000CX
16 Paragon MFS-12000CX
18 Paragon MFC-600S, 600 II CD, ScanMagic 600 II SP
20 Paragon MFC-800S, 800 II SP
22 Paragon MFS-6000SP
24 Paragon MFS-8000SP
26 Paragon MFS-1200SP, MFS-12000SP
57 .IR http://www.meier\-geinitz.de/sane/mustek\-backend/ .
63 non-SCSI scanners that have some support at this point is the 600 II N and 600
64 II EP scanners. The former one comes with its own parallel port adapter (i.e.,
68 too. More info on how to use these parallel port scanners can be found below in
71 Other parallel port scanners are not supported by this backend but you may be
72 successful using the Mustek parallel port backend mustek_pp, see
95 .IR sane\-devel@alioth-lists.debian.net .
99 .IR "scanimage \-L" .
100 Please send all of it to the mailing list. You must be subscribed to sane\-devel
102 .I http://www.sane\-project.org/mailing\-lists.html
114 is either the path-name for the special device that corresponds to a
115 SCSI scanner or the port number at which the parallel port scanners can
117 .B "PARALLEL PORT SCANNERS"
156 .B linedistance\-fix
164 .B lineart\-fix
166 with certain MFS-12000SP scanners.  The problem manifests itself in
171 .B legal\-size
184 runtime you may have to change that value, too. See sane\-scsi(5) for details.
195 .B strip\-height
198 fractional part (e.g., 1.5).  Setting the strip\-height to a small value (one
205 .B disable\-double\-buffering
212 .B disable\-backtracking
220 .B force\-wait
233 option strip\-height 1.5
246 option lineart\-fix
248 option linedistance\-fix
254 same as that of parallel port scanners, connecting it to the computers
255 parallel port will NOT work.
264 should consider that Mustek scanners do not support the SCSI-2
269 Because the Mustek-supplied adapter is not worth much and because
270 Mustek scanners do not support the SCSI-2 disconnect/reconnect
275 For Mustek scanners, it is typically necessary to configure the low-level SCSI
279 for driver- and platform-specific information.
288 .IR http://www.meier\-geinitz.de/sane/mustek\-backend/#SCSI .
290 .SH "PARALLEL PORT SCANNERS"
291 This backend has support for the Paragon 600 II EP and Paragon 600 II N parallel
293 implements a funky parallel port (in other words, the scanner does not connected
294 to the printer parallel port).
297 of the adapter or the parallel port in the mustek.conf file.  Valid port numbers
321 .B force\-wait
331 have stripes and appear to be over-exposed.  When this happens, just
341 .I @LIBDIR@/libsane\-mustek.a
344 .I @LIBDIR@/libsane\-mustek.so
354 semi-colon (`;').  If this variable is not set, the configuration file
381 3      print non-fatal errors and less important messages
405 .I http://www.meier\-geinitz.de/sane/mustek\-backend/
409 Henning Meier-Geinitz, James Perry (600 II EP).
421 .IR http://www.meier\-geinitz.de/sane/mustek\-backend/ .