| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
| D | da9211.txt | 7 - reg: I2C slave address, usually 0x68. 24 reg = <0x68>; 34 enable-gpios = <&gpio 27 0>; 44 reg = <0x68>; 54 enable-gpios = <&gpio 27 0>; 62 enable-gpios = <&gpio 17 0>; 70 reg = <0x68>; 80 enable-gpios = <&gpio 27 0>; 88 reg = <0x68>; 98 enable-gpios = <&gpio 27 0>; [all …]
|
| D | da9210.txt | 6 - reg: the i2c slave address of the regulator. It should be 0x68. 19 reg = <0x68>;
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/regulator/ |
| D | da9211.txt | 7 - reg: I2C slave address, usually 0x68. 24 reg = <0x68>; 34 enable-gpios = <&gpio 27 0>; 44 reg = <0x68>; 54 enable-gpios = <&gpio 27 0>; 62 enable-gpios = <&gpio 17 0>; 70 reg = <0x68>; 80 enable-gpios = <&gpio 27 0>; 88 reg = <0x68>; 98 enable-gpios = <&gpio 27 0>; [all …]
|
| D | da9210.txt | 6 - reg: the i2c slave address of the regulator. It should be 0x68. 19 reg = <0x68>;
|
| /kernel/linux/linux-6.6/drivers/hid/bpf/entrypoints/ |
| D | entrypoints.lskel.h | 27 if (fd > 0) in entrypoints_bpf__hid_tail_call__attach() 35 int ret = 0; in entrypoints_bpf__attach() 37 ret = ret < 0 ? ret : entrypoints_bpf__hid_tail_call__attach(skel); in entrypoints_bpf__attach() 38 return ret < 0 ? ret : 0; in entrypoints_bpf__attach() 80 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in entrypoints_bpf__load() 81 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in entrypoints_bpf__load() 82 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in entrypoints_bpf__load() 83 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in entrypoints_bpf__load() 84 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in entrypoints_bpf__load() 85 \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\ in entrypoints_bpf__load() [all …]
|
| /kernel/linux/linux-5.10/crypto/ |
| D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 101 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 191 "\xAD\xB3\x00\xA0\x28\x5E\x53\x01\x93\x0E\x0C\x70\xFB\x68\x76\x93" 225 "\x4E\xE0\xAA\xB1\x2D\x7B\x61\xA5\x1F\x52\x7A\x9A\x41\xF6\xC1\x68" 231 "\xF8\x3F\x31\x25\x1E\x06\x68\xB4\x27\x84\x81\x38\x01\x57\x96\x41" 235 "\x44\xE5\x6A\xAF\x68\xC5\x6C\x09\x2C\xD3\x8D\xC3\xBE\xF5\xD2\x0A" 249 "\xc2\x7f\x74\x81\x91\x68\x44\x48\x5a\xdc\xa0\x7e\xa7\x0b\x05\x7f" 384 "\x48\xDB\x03\x68\x5A\x5B\xBA\xAE\xF3\xAD\xCF\xC3\x6D\xBA\xF1\x28" 394 "\xB7\x68\x13\x53\xB9\xE7\x89\xC3\xE8\xD6\x6E\xA7\x6D\xEA\x81\xFD" 444 "\x7C\x32\x68\xAD\xB0\xC6\x94\x81\x41\x75\xDC\x06\x78\x0A\xB4\xCF" [all …]
|
| /kernel/linux/linux-6.6/crypto/ |
| D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 193 "\xAD\xB3\x00\xA0\x28\x5E\x53\x01\x93\x0E\x0C\x70\xFB\x68\x76\x93" 240 "\x4E\xE0\xAA\xB1\x2D\x7B\x61\xA5\x1F\x52\x7A\x9A\x41\xF6\xC1\x68" 246 "\xF8\x3F\x31\x25\x1E\x06\x68\xB4\x27\x84\x81\x38\x01\x57\x96\x41" 250 "\x44\xE5\x6A\xAF\x68\xC5\x6C\x09\x2C\xD3\x8D\xC3\xBE\xF5\xD2\x0A" 287 "\xc2\x7f\x74\x81\x91\x68\x44\x48\x5a\xdc\xa0\x7e\xa7\x0b\x05\x7f" 339 "\x68\x27\xE2\x96\xB5\x72\xC9\xC3\xD4\x42\xAA\xAA\xCA\x95\x8F\xFF" 340 "\xC9\x9B\x52\x34\x30\x1D\xCF\xFE\xCF\x3C\x56\x68\x6E\xEF\xE7\x6C" 376 "\x0D\x8B\x6C\x6D\x13\x74\xD5\x1C\xDE\xA9\xF4\x60\x37\xFE\x68\x77" [all …]
|
| /kernel/linux/linux-6.6/net/wireless/certs/ |
| D | sforshee.hex | 2 0x30, 0x82, 0x02, 0xa4, 0x30, 0x82, 0x01, 0x8c, 3 0x02, 0x09, 0x00, 0xb2, 0x8d, 0xdf, 0x47, 0xae, 4 0xf9, 0xce, 0xa7, 0x30, 0x0d, 0x06, 0x09, 0x2a, 5 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x0b, 6 0x05, 0x00, 0x30, 0x13, 0x31, 0x11, 0x30, 0x0f, 7 0x06, 0x03, 0x55, 0x04, 0x03, 0x0c, 0x08, 0x73, 8 0x66, 0x6f, 0x72, 0x73, 0x68, 0x65, 0x65, 0x30, 9 0x20, 0x17, 0x0d, 0x31, 0x37, 0x31, 0x30, 0x30, 10 0x36, 0x31, 0x39, 0x34, 0x30, 0x33, 0x35, 0x5a, 11 0x18, 0x0f, 0x32, 0x31, 0x31, 0x37, 0x30, 0x39, [all …]
|
| /kernel/linux/linux-5.10/net/wireless/certs/ |
| D | sforshee.hex | 2 0x30, 0x82, 0x02, 0xa4, 0x30, 0x82, 0x01, 0x8c, 3 0x02, 0x09, 0x00, 0xb2, 0x8d, 0xdf, 0x47, 0xae, 4 0xf9, 0xce, 0xa7, 0x30, 0x0d, 0x06, 0x09, 0x2a, 5 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x0b, 6 0x05, 0x00, 0x30, 0x13, 0x31, 0x11, 0x30, 0x0f, 7 0x06, 0x03, 0x55, 0x04, 0x03, 0x0c, 0x08, 0x73, 8 0x66, 0x6f, 0x72, 0x73, 0x68, 0x65, 0x65, 0x30, 9 0x20, 0x17, 0x0d, 0x31, 0x37, 0x31, 0x30, 0x30, 10 0x36, 0x31, 0x39, 0x34, 0x30, 0x33, 0x35, 0x5a, 11 0x18, 0x0f, 0x32, 0x31, 0x31, 0x37, 0x30, 0x39, [all …]
|
| /kernel/linux/linux-5.10/drivers/clk/imx/ |
| D | clk-imx6ul.c | 75 { .val = 0, .div = 20, }, 85 { .val = 0, .div = 4, }, 90 { .val = 0, .div = 1, }, 127 hws[IMX6UL_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx6ul_clocks_init() 137 base = of_iomap(np, 0); in imx6ul_clocks_init() 141 …hws[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src… in imx6ul_clocks_init() 142 …hws[IMX6UL_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src… in imx6ul_clocks_init() 143 …hws[IMX6UL_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src… in imx6ul_clocks_init() 144 …hws[IMX6UL_PLL4_BYPASS_SRC] = imx_clk_hw_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src… in imx6ul_clocks_init() 145 …hws[IMX6UL_PLL5_BYPASS_SRC] = imx_clk_hw_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src… in imx6ul_clocks_init() [all …]
|
| /kernel/linux/linux-6.6/drivers/net/wireless/mediatek/mt76/mt76x0/ |
| D | initvals_phy.h | 12 { MT_RF(0, 1), 0x01 }, 13 { MT_RF(0, 2), 0x11 }, 15 { MT_RF(0, 3), 0x73 }, /* VCO Freq Cal */ 16 { MT_RF(0, 4), 0x30 }, /* R4 b<7>=1, VCO cal */ 17 { MT_RF(0, 5), 0x00 }, 18 { MT_RF(0, 6), 0x41 }, 19 { MT_RF(0, 7), 0x00 }, 20 { MT_RF(0, 8), 0x00 }, 21 { MT_RF(0, 9), 0x00 }, 22 { MT_RF(0, 10), 0x0C }, [all …]
|
| /kernel/linux/linux-5.10/drivers/net/wireless/mediatek/mt76/mt76x0/ |
| D | initvals_phy.h | 12 { MT_RF(0, 1), 0x01 }, 13 { MT_RF(0, 2), 0x11 }, 15 { MT_RF(0, 3), 0x73 }, /* VCO Freq Cal */ 16 { MT_RF(0, 4), 0x30 }, /* R4 b<7>=1, VCO cal */ 17 { MT_RF(0, 5), 0x00 }, 18 { MT_RF(0, 6), 0x41 }, 19 { MT_RF(0, 7), 0x00 }, 20 { MT_RF(0, 8), 0x00 }, 21 { MT_RF(0, 9), 0x00 }, 22 { MT_RF(0, 10), 0x0C }, [all …]
|
| /kernel/linux/linux-6.6/drivers/clk/imx/ |
| D | clk-imx6ul.c | 76 { .val = 0, .div = 20, }, 86 { .val = 0, .div = 4, }, 91 { .val = 0, .div = 1, }, 100 IMX6UL_GPR1_ENET1_CLK_SEL, 0, 106 IMX6UL_GPR1_ENET2_CLK_SEL, 0, 141 hws[IMX6UL_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); in imx6ul_clocks_init() 151 base = of_iomap(np, 0); in imx6ul_clocks_init() 155 …hws[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src… in imx6ul_clocks_init() 156 …hws[IMX6UL_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src… in imx6ul_clocks_init() 157 …hws[IMX6UL_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src… in imx6ul_clocks_init() [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/display/bridge/ |
| D | toshiba,tc358767.yaml | 28 - 0x68 29 - 0x0f 31 i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins 58 - 0 60 description: TC358767 GPIO pin number to which HPD is connected to (0 or 1) 66 port@0: 103 - port@0 125 #size-cells = <0>; 129 reg = <0x68>; 137 #size-cells = <0>; [all …]
|
| /kernel/linux/linux-5.10/drivers/scsi/aic7xxx/ |
| D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78, 10 0x00, 0xea, 0x6e, 0x59, 11 0x01, 0xea, 0x04, 0x30, 12 0xff, 0x04, 0x0c, 0x78, 13 0x19, 0xea, 0x6e, 0x59, 14 0x19, 0xea, 0x04, 0x00, 15 0x33, 0xea, 0x68, 0x59, 16 0x33, 0xea, 0x00, 0x00, 17 0x60, 0x3a, 0x3a, 0x68, 18 0x04, 0x4d, 0x35, 0x78, [all …]
|
| /kernel/linux/linux-6.6/drivers/scsi/aic7xxx/ |
| D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78, 10 0x00, 0xea, 0x6e, 0x59, 11 0x01, 0xea, 0x04, 0x30, 12 0xff, 0x04, 0x0c, 0x78, 13 0x19, 0xea, 0x6e, 0x59, 14 0x19, 0xea, 0x04, 0x00, 15 0x33, 0xea, 0x68, 0x59, 16 0x33, 0xea, 0x00, 0x00, 17 0x60, 0x3a, 0x3a, 0x68, 18 0x04, 0x4d, 0x35, 0x78, [all …]
|
| /kernel/linux/linux-6.6/drivers/ata/pata_parport/ |
| D | comm.c | 20 * mode codes: 0 nybble reads, 8-bit writes 25 #define j44(a, b) (((a >> 3) & 0x0f) | ((b << 1) & 0xf0)) 27 #define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4); 31 * cont = 0 - access the IDE register file 34 static int cont_map[2] = { 0x08, 0x10 }; 43 case 0: in comm_read_regr() 44 w0(r); P1; w0(0); in comm_read_regr() 45 w2(6); l = r1(); w0(0x80); h = r1(); w2(4); in comm_read_regr() 49 w0(r+0x20); P1; in comm_read_regr() 50 w0(0); w2(0x26); h = r0(); w2(4); in comm_read_regr() [all …]
|
| /kernel/linux/linux-5.10/drivers/block/paride/ |
| D | comm.c | 29 /* mode codes: 0 nybble reads, 8-bit writes 34 #define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0)) 36 #define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4); 39 /* cont = 0 - access the IDE register file 43 static int cont_map[2] = { 0x08, 0x10 }; 53 case 0: w0(r); P1; w0(0); in comm_read_regr() 54 w2(6); l = r1(); w0(0x80); h = r1(); w2(4); in comm_read_regr() 57 case 1: w0(r+0x20); P1; in comm_read_regr() 58 w0(0); w2(0x26); h = r0(); w2(4); in comm_read_regr() 63 case 4: w3(r+0x20); (void)r1(); in comm_read_regr() [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/rtc/ |
| D | isil,isl12057.txt | 33 reg = <0x68>; 59 reg = <0x68>; 60 pinctrl-0 = <&rtc_alarm_pin>; 72 reg = <0x68>;
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/rtc/ |
| D | isil,isl12057.txt | 33 reg = <0x68>; 59 reg = <0x68>; 60 pinctrl-0 = <&rtc_alarm_pin>; 72 reg = <0x68>;
|
| /kernel/linux/linux-5.10/fs/nls/ |
| D | nls_ascii.c | 17 /* 0x00*/ 18 0x0000, 0x0001, 0x0002, 0x0003, 19 0x0004, 0x0005, 0x0006, 0x0007, 20 0x0008, 0x0009, 0x000a, 0x000b, 21 0x000c, 0x000d, 0x000e, 0x000f, 22 /* 0x10*/ 23 0x0010, 0x0011, 0x0012, 0x0013, 24 0x0014, 0x0015, 0x0016, 0x0017, 25 0x0018, 0x0019, 0x001a, 0x001b, 26 0x001c, 0x001d, 0x001e, 0x001f, [all …]
|
| /kernel/linux/linux-6.6/fs/nls/ |
| D | nls_ascii.c | 17 /* 0x00*/ 18 0x0000, 0x0001, 0x0002, 0x0003, 19 0x0004, 0x0005, 0x0006, 0x0007, 20 0x0008, 0x0009, 0x000a, 0x000b, 21 0x000c, 0x000d, 0x000e, 0x000f, 22 /* 0x10*/ 23 0x0010, 0x0011, 0x0012, 0x0013, 24 0x0014, 0x0015, 0x0016, 0x0017, 25 0x0018, 0x0019, 0x001a, 0x001b, 26 0x001c, 0x001d, 0x001e, 0x001f, [all …]
|
| /kernel/linux/linux-6.6/arch/mips/pci/ |
| D | ops-lantiq.c | 23 #define PCI_ACCESS_READ 0 33 /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the in ltq_pci_config_access() 35 if ((bus->number != 0) || ((devfn & 0xf8) > 0x78) in ltq_pci_config_access() 36 || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68)) in ltq_pci_config_access() 43 LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3); in ltq_pci_config_access() 56 cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; in ltq_pci_config_access() 60 cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; in ltq_pci_config_access() 65 if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) in ltq_pci_config_access() 68 return 0; in ltq_pci_config_access() 74 u32 data = 0; in ltq_pci_read_config_dword() [all …]
|
| /kernel/linux/linux-5.10/arch/mips/pci/ |
| D | ops-lantiq.c | 23 #define PCI_ACCESS_READ 0 33 /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the in ltq_pci_config_access() 35 if ((bus->number != 0) || ((devfn & 0xf8) > 0x78) in ltq_pci_config_access() 36 || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68)) in ltq_pci_config_access() 43 LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3); in ltq_pci_config_access() 56 cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; in ltq_pci_config_access() 60 cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; in ltq_pci_config_access() 65 if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) in ltq_pci_config_access() 68 return 0; in ltq_pci_config_access() 74 u32 data = 0; in ltq_pci_read_config_dword() [all …]
|
| /kernel/linux/linux-6.6/crypto/asymmetric_keys/ |
| D | selftest.c | 49 "\x43\xfd\x24\xb2\x49\x3c\xa5\xf7\x7a\x7c\xd4\x45\x3d\x97\x75\x68" 61 "\x38\x88\x18\x97\x96\x08\x81\xaa\xcc\x8f\x0f\x8a\x32\x7b\x76\x68" 62 "\x03\x68\x43\xbf\x11\xba\x55\x60\xfd\x80\x1c\x0d\x9b\x69\xb6\x09" 71 "\x31\xf3\x1c\xc7\x4b\xe6\x93\xcd\x42\xa2\xe4\x68\x10\x47\x9d\xfc" 86 "\x68\xe6\xe4\x7b\xd0\x28\xf7\x6d\xe7\x3f\x50\xfc\x91\x7c\x91\x56" 118 "\x54\x68\x69\x73\x20\x69\x73\x20\x73\x6f\x6d\x65\x20\x74\x65\x73" 140 "\x88\x79\x99\x51\x6b\x5b\x28\x31\xc0\xb3\x1b\x7a\x68\x2c\x00\xdb" 199 if (ret < 0) in fips_signature_selftest() 202 for (i = 0; i < ARRAY_SIZE(certs_tests); i++) { in fips_signature_selftest() 213 if (ret < 0) in fips_signature_selftest() [all …]
|