| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/soc/imx/ |
| D | fsl,imx8mm-disp-blk-ctrl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX8MM DISP blk-ctrl
10 - Lucas Stach <l.stach@pengutronix.de>
13 The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the display and MIPI CSI
20 - const: fsl,imx8mm-disp-blk-ctrl
21 - const: syscon
[all …]
|
| D | fsl,imx8mn-disp-blk-ctrl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX8MN DISP blk-ctrl
10 - Lucas Stach <l.stach@pengutronix.de>
13 The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the display and MIPI CSI
20 - const: fsl,imx8mn-disp-blk-ctrl
21 - const: syscon
[all …]
|
| /kernel/linux/linux-6.6/drivers/spi/ |
| D | spi-rzv2m-csi.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Renesas RZ/V2M Clocked Serial Interface (CSI) driver
21 #define CSI_MODE 0x00 /* CSI mode control */
22 #define CSI_CLKSEL 0x04 /* CSI clock select */
23 #define CSI_CNT 0x08 /* CSI control */
24 #define CSI_INT 0x0C /* CSI interrupt status */
25 #define CSI_IFIFOL 0x10 /* CSI receive FIFO level display */
26 #define CSI_OFIFOL 0x14 /* CSI transmit FIFO level display */
27 #define CSI_IFIFO 0x18 /* CSI receive window */
28 #define CSI_OFIFO 0x1C /* CSI transmit window */
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/media/ |
| D | allwinner,sun4i-a10-csi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A10 CMOS Sensor Interface (CSI)
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
13 description: |-
20 - const: allwinner,sun4i-a10-csi1
21 - const: allwinner,sun7i-a20-csi0
[all …]
|
| D | allwinner,sun6i-a31-csi.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A31 CMOS Sensor Interface (CSI)
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
16 - allwinner,sun6i-a31-csi
17 - allwinner,sun8i-a83t-csi
18 - allwinner,sun8i-h3-csi
[all …]
|
| D | nxp,imx-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
10 - Rui Miguel Silva <rmfrfs@gmail.com>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
13 description: |-
14 The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
19 While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
[all …]
|
| D | renesas,vin.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Renesas R-Car Video Input (VIN)
11 - Niklas Söderlund <niklas.soderlund@ragnatech.se>
14 The R-Car Video Input (VIN) device provides video input capabilities for the
15 Renesas R-Car family of devices.
20 on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
25 - items:
26 - enum:
[all …]
|
| D | video-interfaces.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/video-interfaces.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sakari Ailus <sakari.ailus@linux.intel.com>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
29 #address-cells = <1>;
30 #size-cells = <0>;
45 a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
49 specify #address-cells, #size-cells properties independently for the 'port'
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/media/ |
| D | allwinner,sun4i-a10-csi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
13 description: |-
20 - const: allwinner,sun4i-a10-csi1
21 - const: allwinner,sun7i-a20-csi0
[all …]
|
| D | allwinner,sun6i-a31-csi.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
16 - allwinner,sun6i-a31-csi
17 - allwinner,sun8i-a83t-csi
18 - allwinner,sun8i-h3-csi
[all …]
|
| D | imx7-mipi-csi2.txt | 5 --------------
7 This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
8 compatible with previous version of Samsung D-phy.
12 - compatible : "fsl,imx7-mipi-csi2";
13 - reg : base address and length of the register set for the device;
14 - interrupts : should contain MIPI CSIS interrupt;
15 - clocks : list of clock specifiers, see
16 Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
17 - clock-names : must contain "pclk", "wrap" and "phy" entries, matching
19 - power-domains : a phandle to the power domain, see
[all …]
|
| D | renesas,vin.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Renesas R-Car Video Input (VIN)
11 - Niklas Söderlund <niklas.soderlund@ragnatech.se>
14 The R-Car Video Input (VIN) device provides video input capabilities for the
15 Renesas R-Car family of devices.
20 on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
25 - items:
26 - enum:
[all …]
|
| D | video-interfaces.txt | 4 ---------------
21 #address-cells = <1>;
22 #size-cells = <0>;
37 a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
41 specify #address-cells, #size-cells properties independently for the 'port'
44 Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
53 a device is partitioned into multiple data busses, e.g. 16-bit input port
54 divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width
55 and data-shift properties can be used to assign physical data lines to each
59 --------------------------------
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/spi/ |
| D | renesas,rzv2m-csi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Renesas RZ/V2M Clocked Serial Interface (CSI)
10 - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
11 - Geert Uytterhoeven <geert+renesas@glider.be>
14 - $ref: spi-controller.yaml#
18 const: renesas,rzv2m-csi
28 - description: The clock used to generate the output clock (CSICLK)
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/phy/ |
| D | rockchip-inno-csi-dphy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Rockchip SoC MIPI RX0 D-PHY
10 - Heiko Stuebner <heiko@sntech.de>
13 The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which
14 connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
19 - rockchip,px30-csi-dphy
20 - rockchip,rk1808-csi-dphy
[all …]
|
| /kernel/linux/linux-6.6/drivers/phy/rockchip/ |
| D | phy-rockchip-inno-csidphy.c | 1 // SPDX-License-Identifier: GPL-2.0
17 #include <linux/phy/phy-mipi-dphy.h>
60 /* Configure the count time of the THS-SETTLE by protocol. */
71 * The higher 16-bit of this register is used for write protection
93 { .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
134 struct clk *pclk; member
145 const struct dphy_drv_data *drv_data = priv->drv_data; in write_grf_reg()
146 const struct dphy_reg *reg = &drv_data->grf_regs[index]; in write_grf_reg()
148 if (reg->offset) in write_grf_reg()
149 regmap_write(priv->grf, reg->offset, in write_grf_reg()
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/media/i2c/ |
| D | ov5640.txt | 1 * Omnivision OV5640 MIPI CSI-2 / parallel sensor
4 - compatible: should be "ovti,ov5640"
5 - clocks: reference to the xclk input clock.
6 - clock-names: should be "xclk".
7 - DOVDD-supply: Digital I/O voltage supply, 1.8 volts
8 - AVDD-supply: Analog voltage supply, 2.8 volts
9 - DVDD-supply: Digital core voltage supply, 1.5 volts
12 - reset-gpios: reference to the GPIO connected to the reset pin, if any.
14 - powerdown-gpios: reference to the GPIO connected to the powerdown pin,
16 - rotation: as defined in
[all …]
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/allwinner/ |
| D | sun50i-a64-amarula-relic.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 /dts-v1/;
7 #include "sun50i-a64.dtsi"
8 #include "sun50i-a64-cpu-opp.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
13 model = "Amarula A64-Relic";
14 compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
21 stdout-path = "serial0:115200n8";
25 compatible = "i2c-gpio";
26 sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
[all …]
|
| D | sun50i-a64-pinetab.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "sun50i-a64.dtsi"
10 #include "sun50i-a64-cpu-opp.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/pwm/pwm.h>
18 compatible = "pine64,pinetab", "allwinner,sun50i-a64";
26 compatible = "pwm-backlight";
28 brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/allwinner/ |
| D | sun50i-a64-amarula-relic.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 /dts-v1/;
7 #include "sun50i-a64.dtsi"
8 #include "sun50i-a64-cpu-opp.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
13 model = "Amarula A64-Relic";
14 compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
21 stdout-path = "serial0:115200n8";
25 compatible = "i2c-gpio";
26 sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
[all …]
|
| D | sun50i-a64-pinetab.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "sun50i-a64.dtsi"
10 #include "sun50i-a64-cpu-opp.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
14 #include <dt-bindings/pwm/pwm.h>
18 compatible = "pine64,pinetab", "allwinner,sun50i-a64";
19 chassis-type = "tablet";
27 compatible = "pwm-backlight";
[all …]
|
| /kernel/linux/linux-6.6/drivers/pmdomain/imx/ |
| D | imx8m-blk-ctrl.c | 1 // SPDX-License-Identifier: GPL-2.0+
19 #include <dt-bindings/power/imx8mm-power.h>
20 #include <dt-bindings/power/imx8mn-power.h>
21 #include <dt-bindings/power/imx8mp-power.h>
22 #include <dt-bindings/power/imx8mq-power.h>
53 * an if-statement should be used before setting and clearing this
88 const struct imx8m_blk_ctrl_domain_data *data = domain->data; in imx8m_blk_ctrl_power_on()
89 struct imx8m_blk_ctrl *bc = domain->bc; in imx8m_blk_ctrl_power_on()
93 ret = pm_runtime_get_sync(bc->bus_power_dev); in imx8m_blk_ctrl_power_on()
95 pm_runtime_put_noidle(bc->bus_power_dev); in imx8m_blk_ctrl_power_on()
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | sun8i-s3-pinecube.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR X11)
6 /dts-v1/;
7 #include "sun8i-v3.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
13 compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
20 stdout-path = "serial0:115200n8";
24 compatible = "gpio-leds";
38 compatible = "regulator-fixed";
39 regulator-name = "vcc5v0";
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/allwinner/ |
| D | sun8i-s3-pinecube.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR X11)
6 /dts-v1/;
7 #include "sun8i-v3.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
13 compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
20 stdout-path = "serial0:115200n8";
24 compatible = "gpio-leds";
38 compatible = "regulator-fixed";
39 regulator-name = "vcc5v0";
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/renesas/ |
| D | r9a09g011.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include <dt-bindings/clock/r9a09g011-cpg.h>
13 #address-cells = <2>;
14 #size-cells = <2>;
18 compatible = "fixed-clock";
19 #clock-cells = <0>;
21 clock-frequency = <0>;
25 #address-cells = <1>;
26 #size-cells = <0>;
[all …]
|