Lines Matching +full:disable +full:- +full:over +full:- +full:current

10 		This allows to avoid side-effects with drivers
28 		drivers, non-authorized one are not.  By default, wired
33 Contact:	linux-usb@vger.kernel.org
67 What:		/sys/bus/usb-serial/drivers/.../new_id
69 Contact:	linux-usb@vger.kernel.org
72 		extra bus folder "usb-serial" in sysfs; apart from that
97 		If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
103 		or disable) indicating whether or not USB2 hardware LPM is
105 		the file to enable/disable the feature.
113 		If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
120 		files hold a string value (enable or disable) indicating whether
141 		attribute allows user-space to know whether the device is
145 		an on-screen keyboard if the only wireless keyboard is
148 		statuses available in WWAN, WLAN/Wi-Fi, Bluetooth, etc.
182 		In some cases, we care about time-to-active for devices
183 		connected on a specific port (e.g. non-standard USB port like
186 		This attribute is a bit-field that controls the behavior of
189 		 - Bit 0 of this field selects the "old" enumeration scheme,
197 		 - Bit 1 reduces TRSTRCY to the 10 ms that are required by the
206 		Most hubs are able to detect over-current situations on their
208 		the number of over-current situation occurred on a specific port
217 		  OVER_CURRENT_COUNT=[current value of this sysfs attribute]
234 		Link to the USB Type-C connector when available. This link is
235 		only created when USB Type-C Connector Class is enabled, and
239 What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/disable
245 		power switching -- most hubs don't support it). If
265 		Indicates current state of the USB device attached to the port.
266 		Valid states are: 'not-attached', 'attached', 'powered',
280 		Supported values are 0 - 65535 microseconds.
294 		Supported values are 0 - 15.
303 		USB 3.2 adds Dual-lane support, 2 rx and 2 tx lanes over Type-C.
304 		Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
312 		USB 3.2 adds Dual-lane support, 2 rx and 2 tx -lanes over Type-C.
313 		Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
320 		Symlink to the USB Type-C partner device. USB Type-C partner
321 		represents the component that communicates over the
322 		Configuration Channel (CC signal on USB Type-C connectors and
327 		The current interface alternate setting number, in decimal.
342 		This value shows the current configuration, in decimal.
397 		Attributes of the current configuration, in hexadecimal.
415 		decimal. The current configuration is controlled via:
438 		current configuration. It may include the firmware version
452 		this file are in bus-endian format. Note that the kernel will not
585 		    - both (on control endpoints)
586 		    - in
587 		    - out
598 		    - Control
599 		    - Isoc
600 		    - Bulk
601 		    - Interrupt
602 		    - unknown