Lines Matching +full:max +full:- +full:by +full:- +full:define
16 The contents of the label are free-form.
52 Voltage max value.
60 Voltage critical max value.
83 This varies by chip and by motherboard.
85 by the chip driver, and must be done by the application.
135 this voltage channel is being used for, and user-space
136 doesn't. In all other cases, the label is provided by
137 user-space.
145 When disabled the sensor read will return -ENODATA.
147 - 1: Enable
148 - 0: Disable
156 - 1: Failed
157 - 0: Ok
177 Originally the VRM standard version multiplied by 10, but now
214 Only rarely supported by the hardware.
251 thus attribute) the value assumed by all devices is 2 pulses
262 Only makes sense if the chip supports closed-loop fan speed
272 this fan channel is being used for, and user-space doesn't.
273 In all other cases, the label is provided by user-space.
281 When disabled the sensor read will return -ENODATA.
283 - 1: Enable
284 - 0: Disable
292 - 1: Failed
293 - 0: Ok
305 255 is max or 100%.
311 - 0: no fan speed control (i.e. fan at full speed)
312 - 1: manual fan speed control enabled (using `pwmY`)
313 - 2+: automatic fan speed control enabled
322 - 0: DC mode (direct current)
323 - 1: PWM mode (pulse-width modulation)
350 Define the PWM vs temperature curve.
352 Number of trip points is chip-dependent. Use this for chips
361 Define the PWM vs temperature curve.
363 Number of trip points is chip-dependent. Use this for chips
376 - 1: CPU embedded diode
377 - 2: 3904 transistor
378 - 3: thermal diode
379 - 4: thermistor
380 - 5: AMD AMDSI
381 - 6: Intel PECI
383 Not all types are supported by all chips
387 Temperature max value.
397 - 0: OK
398 - 1: temperature has reached tempY_max
414 - 0: OK
415 - 1: temperature has reached tempY_min
421 Temperature hysteresis value for max limit.
426 from the max value.
450 Temperature critical max value, typically greater than
461 - 0: OK
462 - 1: temperature has reached tempY_crit
479 Temperature emergency max value, for chips supporting more than
491 - 0: OK
492 - 1: temperature has reached tempY_emergency
530 by the chip.
543 this temperature channel is being used for, and user-space
544 doesn't. In all other cases, the label is provided by
545 user-space.
581 When disabled the sensor read will return -ENODATA.
583 - 1: Enable
584 - 0: Disable
606 Current max value
682 When disabled the sensor read will return -ENODATA.
684 - 1: Enable
685 - 0: Disable
819 cap is changed by the hardware. The `*_cap`
821 enforced by hardware.
878 -ENODATA.
880 - 1: Enable
881 - 0: Disable
914 -ENODATA.
916 - 1: Enable
917 - 0: Disable
925 - 0: OK
926 - 1: Humidity limit has been reached
935 -ENODATA.
937 - 1: Enable
938 - 0: Disable
946 - 1: Failed
947 - 0: Ok
955 Unit: milli-percent (per cent mille, pcm)
966 this humidity channel is being used for, and user-space
967 doesn't. In all other cases, the label is provided by
968 user-space.
974 Humidity max value.
976 Unit: milli-percent (per cent mille, pcm)
984 - 0: OK
985 - 1: Maximum humidity detected
991 Humidity hysteresis value for max limit.
993 Unit: milli-percent (per cent mille, pcm)
996 from the max value.
1004 Unit: milli-percent (per cent mille, pcm)
1012 - 0: OK
1013 - 1: Minimum humidity detected
1021 Unit: milli-percent (per cent mille, pcm)
1032 Unit: milli-percent (per cent mille, pcm)
1040 Unit: milli-percent (per cent mille, pcm)
1049 - 0: OK
1050 - 1: intrusion detected
1055 automatically when read, this one sticks until cleared by
1056 the user. This is done by writing 0 to the file. Writing
1063 - 0: disable
1064 - 1: enable
1072 - 0, off, n: disable
1073 - 1, on, y: enable