Lines Matching +full:phy +full:- +full:device
1 What: /sys/class/mdio_bus/<bus>/<device>/attached_dev
6 Symbolic link to the network device this PHY device is
9 What: /sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
14 This attribute contains the boolean value whether a given PHY
15 device has had any "fixup" workaround running on it, encoded as
17 PHY configurations.
19 What: /sys/class/mdio_bus/<bus>/<device>/phy_id
24 This attribute contains the 32-bit PHY Identifier as reported
25 by the device during bus enumeration, encoded in hexadecimal.
26 This ID is used to match the device with the appropriate
29 What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
34 This attribute contains the PHY interface as configured by the
37 appropriate mode for its data lines to the PHY hardware.
41 <empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
42 rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
43 xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
44 xaui, 10gbase-kr, unknown
46 What: /sys/class/mdio_bus/<bus>/<device>/phy_standalone
51 Boolean value indicating whether the PHY device is used in
55 What: /sys/class/mdio_bus/<bus>/<device>/phy_dev_flags
60 32-bit hexadecimal number representing a bit mask of the
61 configuration bits passed from the consumer of the PHY
62 (Ethernet MAC, switch, etc.) to the PHY driver. The flags are
65 for facilitating the debugging of PHY drivers.