Lines Matching +full:value +full:- +full:start

1 What:		/sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status
6 		Read returns a hexadecimal value that tells the current status
7 		of the FPGA device. Each bit position in the status value is
9 		https://docs.xilinx.com/v/u/en-US/ug570-ultrascale-configuration
24 		BIT(4)			0: Start-up sequence has not finished
25 					1: Start-up sequence has finished
27 		BIT(5)			0: All I/Os are placed in High-Z state
30 		BIT(6)			0: Flip-flops and block RAM are write disabled
31 					1: Flip-flops and block RAM are write enabled
41 		BIT(12)			Value on INIT_B_PIN pin
46 		BIT(14)			Value on DONE_PIN pin.
54 		BIT(17)			System Monitor over-temperature if set
56 		BIT(18) to BIT(20)	Start-up state machine (0 to 7)