Lines Matching +full:psci +full:- +full:0

1 .. SPDX-License-Identifier: GPL-2.0
16 ---------------------------
24    * Lowercase characters: [a-z]
25    * Digits: [0-9]
26    * Dash: -
30    * Lowercase characters: [a-z]
31    * Digits: [0-9]
42 	gpi_dma2: dma-controller@a00000 {
43 		compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
44 		reg = <0x0 0x00a00000 0x0 0x60000>;
48 --------------
56 2. Nodes without unit addresses shall be ordered alpha-numerically by the node
61    ordered either alpha-numerically or by keeping the order from DTSI, where
64 The above-described ordering rules are easy to enforce during review, reduce
77 		psci {
81 		soc@0 {
82 			dma: dma-controller@10000 {
86 			clk: clock-controller@80000 {
92 	/* Board DTS - alphabetical order */
102 	/* Board DTS - alternative order, keep as DTSI */
113 ----------------------------------
121    vendor-prefixes)
122 5. Vendor-specific properties
128 The above-described ordering follows this approach:
140 	device_node: device-class@6789abc {
142 		reg = <0x0 0x06789abc 0x0 0xa123>;
143 		ranges = <0x0 0x0 0x06789abc 0x1000>;
144 		#dma-cells = <1>;
145 		clocks = <&clock_controller 0>, <&clock_controller 1>;
146 		clock-names = "bus", "host";
147 		#address-cells = <1>;
148 		#size-cells = <1>;
149 		vendor,custom-property = <2>;
152 		child_node: child-class@100 {
153 			reg = <0x100 0x200>;
161 		vdd-supply = <&board_vreg1>;
166 -----------
168 1. Use indentation according to Documentation/process/coding-style.rst.
176 	thermal-sensor@c271000 {
177 		compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
178 		reg = <0x0 0x0c271000 0x0 0x1000>,
179 		      <0x0 0x0c222000 0x0 0x1000>;
183 -----------------------
191 2. If applicable: DTSI with common or re-usable parts of the hardware, e.g.
192    entire System-on-Module.
197 external reference SoC input clock, which could be coded as a fixed-clock in