Lines Matching full:pf

72 from the administrative interface on the PF. This configuration allows
148 - You cannot update the DDP package if any PF drivers are already loaded. To
152 - Only the first loaded PF per device can download a package for that device.
398 Accelerated Receive Flow Steering (aRFS) on the PF. aRFS is a load-balancing
490 how many VFs each PF supports, use the following command::
498 Displaying VF Statistics on the PF
500 Use the following command to display the statistics for the PF and its VFs::
507 The PF driver will display a subset of the statistics for the PF and for all
508 VFs that are configured. The PF will always print a statistics block for each
524 For example, the following will configure PF eth0 and the first VF on VLAN 10::
531 If the physical function (PF) link is down, you can force link up (from the
532 host PF) on any virtual functions (VF) bound to the PF.
534 For example, to force link up on VF 0 bound to PF eth0::
551 This setting lasts until the PF is reloaded.
562 trusted VF to request selective promiscuous mode on the Physical Function (PF).
570 If the VM is not trusted, the PF will ignore promiscuous mode requests from the
598 vf-true-promisc-support private flag is only exposed to the first PF of the
599 device. The PF remains in limited promiscuous mode regardless of the
615 packet until a VF driver reset occurs. You can view MDD messages in the PF's
618 - If the PF driver logs MDD events from the VF, confirm that the correct VF
622 - When automatic VF resets are enabled, the PF driver will immediately reset
624 - If automatic VF resets are disabled, the PF will not automatically reset the
830   MAC address of the underlying PF (Physical Function) device.
858     2) spoofchk is disabled from the PF. If you enable spoofchk, the VF will
913 The driver supports FW logging via the debugfs interface on PF 0 only. The FW