Lines Matching +full:eth +full:- +full:mac

1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 1999-2018 Intel Corporation.
13 - Identifying Your Adapter
14 - Command Line Parameters
15 - Additional Configurations
16 - Support
46 -------
47 :Valid Range: 0-7
49 This parameter adds support for SR-IOV. It causes the driver to spawn up to
76 NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
85 -----
86 :Valid Range: 0-16 (0=none,...,16=all)
96 ------------
103     ifconfig eth<x> mtu 9000 up
107     ip link set mtu 9000 dev eth<x>
108     ip link set up dev eth<x>
113 - For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
114 - For SLES: /etc/sysconfig/network/<config_file>
124 -------
133 --------------------------
140 NOTE: Wake on LAN is only supported on port A of multi-port devices.  Also
142 - Intel(R) Gigabit VT Quad Port Server Adapter
146 ----------
147 In this mode, a separate MSI-X vector is allocated for each queue and one for
154 REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found,
156 receive multiqueue on all kernels that support MSI-X.
159 and multiqueue mode or vice-versa.
162 MAC and VLAN anti-spoofing feature
163 ----------------------------------
174 Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
175 ------------------------------------------------------------
176 You can set a MAC address of a Virtual Function (VF), a default VLAN and the
182 ------------------------------
184 the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the
208 to intel-wired-lan@lists.osuosl.org.