Lines Matching full:frame

46 for Ethernet frame transfers and control transactions for register
60 or may not contain valid frame data independent from each other, allowing
66 frame data is present and provides the information to determine which
67 bytes of the payload contain valid frame data.
71 The data footer indicates if there is receive frame data present within
73 of the payload contain valid frame data.
153 - Forwards the received Ethernet frame from 10Base-T1x MAC-PHY to n/w
163 transmit frame data within the 64 bytes data chunk payload.
189                 any receive frame data within the current chunk.
198               whether the current chunk contains valid transmit frame data
204               beginning of an Ethernet frame is present in the current
206               zero. This bit is not to be confused with the Start-of-Frame
212                    Ethernet frame to be transmitted. The host shall write
218               of an Ethernet frame is present in the current transmit data
223                   that points to the last byte of the Ethernet frame to
227                  frame is transmitted onto the network.
257 location of the receive frame data within the 64 bytes data chunk payload.
286                    data chunks of frame data that are available for
288                    field is zero when there is no receive frame data
297               receive frame data (DV = 1) or not (DV = 0). When ‘0’, the
301               chunk payload contains the start of an Ethernet frame.
303               confused with the Start-of-Frame Delimiter (SFD) byte
309                    frame. When a receive timestamp has been added to the
310                    beginning of the received Ethernet frame (RTSA = 1)
314 FD (Bit 15) - Frame Drop. When set, this bit indicates that the MAC has
316               received Ethernet frame. This bit is only valid at the end
317               of a received Ethernet frame (EV = 1) and shall be zero at
321               received Ethernet frame is present in this receive data
326                   locates the last byte of the received Ethernet frame.
331                received Ethernet frame. The MAC-PHY shall set this bit to
336                received Ethernet frame. Method used is odd parity. The
340                  of transmit data chunks of frame data that the SPI host
490 The transmit Ethernet frame in the skb is or going to be transmitted through
495 Zero align receive frame feature can be enabled to align all receive ethernet