| /Documentation/devicetree/bindings/net/ |
| D | mdio-mux-gpio.yaml | 44 gpios = <&gpio1 3 0>, <&gpio1 4 0>;
47 #size-cells = <0>;
52 #size-cells = <0>;
56 marvell,reg-init = <3 0x10 0 0x5777>,
57 <3 0x11 0 0x00aa>,
58 <3 0x12 0 0x4105>,
59 <3 0x13 0 0x0a60>;
65 marvell,reg-init = <3 0x10 0 0x5777>,
66 <3 0x11 0 0x00aa>,
67 <3 0x12 0 0x4105>,
[all …]
|
| D | loongson,ls1c-emac.yaml | 89 reg = <0x1fe10000 0x10000>;
106 #size-cells = <0>;
110 reg = <0x13>;
|
| /Documentation/devicetree/bindings/power/supply/ |
| D | qcom,pm8916-lbc.yaml | 96 #size-cells = <0>;
100 reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
103 interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
104 <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
105 <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
106 <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
107 <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
108 <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
109 <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
110 <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
[all …]
|
| D | qcom,pmi8998-charger.yaml | 62 #size-cells = <0>;
67 reg = <0x1000>;
69 interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
70 <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
71 <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
72 <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
|
| D | qcom,pm8941-charger.yaml | 151 #size-cells = <0>;
155 reg = <0x1000>;
156 interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
157 <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
158 <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
159 <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
160 <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
161 <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
162 <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
163 <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
|
| /Documentation/devicetree/bindings/sound/ |
| D | ak4118.txt | 16 #sound-dai-cells = <0>;
18 reg = <0x13>;
19 reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
|
| /Documentation/networking/ |
| D | mac80211-injection.rst | 75 0x00, 0x00, // <-- radiotap version
76 0x0b, 0x00, // <- radiotap header length
77 0x04, 0x0c, 0x00, 0x00, // <-- bitmap
78 0x6c, // <-- rate
79 0x0c, //<-- tx power
80 0x01 //<-- antenna
85 0x08, 0x01, 0x00, 0x00,
86 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
87 0x13, 0x22, 0x33, 0x44, 0x55, 0x66,
88 0x13, 0x22, 0x33, 0x44, 0x55, 0x66,
[all …]
|
| /Documentation/devicetree/bindings/iio/proximity/ |
| D | vishay,vcnl3020.yaml | 41 enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
57 #size-cells = <0>;
61 reg = <0x13>;
|
| /Documentation/devicetree/bindings/clock/ |
| D | renesas,rzv2h-cpg.yaml | 45 calculation is (1 * 16 + 3) = 0x13.
49 const: 0
56 for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30.
74 reg = <0x10420000 0x10000>;
78 #power-domain-cells = <0>;
|
| /Documentation/devicetree/bindings/tpm/ |
| D | tcg,tpm-tis-i2c.yaml | 66 #size-cells = <0>;
71 reg = <0x57>;
72 linux,sml-base = <0x7f 0xfd450000>;
73 linux,sml-size = <0x10000>;
82 #size-cells = <0>;
85 reg = <0x13>;
|
| /Documentation/devicetree/bindings/pci/ |
| D | xgene-pci-msi.txt | 8 - reg: physical base address (0x79000000) and length (0x900000) for controller
13 interrupt number 0x10 to 0x1f.
27 reg = <0x00 0x79000000 0x0 0x900000>;
28 interrupts = <0x0 0x10 0x4>
29 <0x0 0x11 0x4>
30 <0x0 0x12 0x4>
31 <0x0 0x13 0x4>
32 <0x0 0x14 0x4>
33 <0x0 0x15 0x4>
34 <0x0 0x16 0x4>
[all …]
|
| /Documentation/devicetree/bindings/firmware/ |
| D | arm,scmi.yaml | 20 and Management Interface Platform Design Document")[0] provide for OSPM in
23 [0] https://developer.arm.com/documentation/den0056/latest
117 const: 0
125 default: 0
150 const: 0x11
164 const: 0x12
172 const: 0x13
193 const: 0x14
207 const: 0x15
221 const: 0x16
[all …]
|
| /Documentation/devicetree/bindings/net/dsa/ |
| D | lantiq,gswip.yaml | 50 const: 0
65 "^gphy@[0-9a-f]{1,2}$":
72 minimum: 0
104 reg = <0xe108000 0x3100>, /* switch */
105 <0xe10b100 0xd8>, /* mdio */
106 <0xe10b1d8 0x130>; /* mii */
107 dsa,member = <0 0>;
111 #size-cells = <0>;
113 port@0 {
114 reg = <0>;
[all …]
|
| /Documentation/input/devices/ |
| D | alps.rst | 32 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
33 00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
45 The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
94 byte 0: 0 0 YSGN XSGN 1 M R L
109 byte 0: 1 0 0 0 1 x9 x8 x7
110 byte 1: 0 x6 x5 x4 x3 x2 x1 x0
111 byte 2: 0 ? ? l r ? fin ges
112 byte 3: 0 ? ? ? ? y9 y8 y7
113 byte 4: 0 y6 y5 y4 y3 y2 y1 y0
114 byte 5: 0 z6 z5 z4 z3 z2 z1 z0
[all …]
|
| /Documentation/devicetree/bindings/mailbox/ |
| D | arm,mhu.yaml | 98 reg = <0 0x2b1f0000 0 0x1000>;
99 interrupts = <0 36 4>, /* LP-NonSecure */
100 <0 35 4>, /* HP-NonSecure */
101 <0 37 4>; /* Secure */
102 clocks = <&clock 0 2 1>;
130 reg = <0 0x2b2f0000 0 0x1000>;
131 interrupts = <0 36 4>, /* LP-NonSecure */
132 <0 35 4>, /* HP-NonSecure */
133 <0 37 4>; /* Secure */
134 clocks = <&clock 0 2 1>;
[all …]
|
| /Documentation/translations/zh_TW/admin-guide/ |
| D | tainted-kernels.rst | 36 CPU: 0 PID: 4424 Comm: insmod Tainted: P W O 4.20.0-0.rc6.fc30 #1
38 RIP: 0010:my_oops_init+0x13/0x1000 [kpanic]
55 如果返回 ``0`` ，則內核沒有受到污染；任何其他數字都表示受到污染的原因。解碼
64 * Proprietary module was loaded (#0)
86 0 G/P 1 已加載專用模塊
111 0) ``G`` 加載的所有模塊都有GPL或兼容許可證， ``P`` 加載了任何專有模塊。
|
| /Documentation/translations/zh_CN/admin-guide/ |
| D | tainted-kernels.rst | 33 CPU: 0 PID: 4424 Comm: insmod Tainted: P W O 4.20.0-0.rc6.fc30 #1
35 RIP: 0010:my_oops_init+0x13/0x1000 [kpanic]
52 如果返回 ``0`` ，则内核没有受到污染；任何其他数字都表示受到污染的原因。解码
61 * Proprietary module was loaded (#0)
83 0 G/P 1 已加载专用模块
108 0) ``G`` 加载的所有模块都有GPL或兼容许可证， ``P`` 加载了任何专有模块。
|
| /Documentation/wmi/ |
| D | acpi-interface.rst | 31 0x00 16 128 bit Variant 2 object GUID.
32 0x10 2 2 character method ID or single byte notification ID.
33 0x12 1 Object instance count.
34 0x13 1 Object flags.
39 - 0x1: Data block usage is expensive and must be explicitly enabled/disabled.
40 - 0x2: Data block contains WMI methods.
41 - 0x4: Data block contains ASCIZ string.
42 - 0x8: Data block describes a WMI event, use notification ID instead
83 of 0 if the WMI event should be disabled, other values will enable
|
| /Documentation/devicetree/bindings/dma/ti/ |
| D | k3-pktdma.yaml | 39 for source thread IDs (rx): 0 - 0x7fff
40 for destination thread IDs (tx): 0x8000 - 0xffff
82 maximum: 0x3f
93 maximum: 0x3f
104 maximum: 0x3f
115 maximum: 0x3f
150 reg = <0x0 0x485c0000 0x0 0x100>,
151 <0x0 0x4a800000 0x0 0x20000>,
152 <0x0 0x4aa00000 0x0 0x40000>,
153 <0x0 0x4b800000 0x0 0x400000>,
[all …]
|
| /Documentation/PCI/endpoint/ |
| D | pci-test-howto.rst | 67 vendorid with 0xffff and interrupt_pin with 0x0001::
70 0xffff
72 0x0001
82 # echo 0x104c > functions/pci_epf_test/func1/vendorid
83 # echo 0xb500 > functions/pci_epf_test/func1/deviceid
204 MSI-X13: NOT OKAY
|
| /Documentation/scsi/ |
| D | arcmsr_spec.rst | 10 1. Message 0
38 offset 0xf00 for RS232 out (request buffer)
39 offset 0xe00 for RS232 in (scratch buffer)
40 offset 0xa00 for inbound message code message_rwbuffer
42 offset 0xa00 for outbound message code message_rwbuffer
71 0 256 bytes frame
75 0 normal request
92 bit31 must be 0 (for this type of reply)
96 0 no error, ignore AdapStatus/DevStatus/SenseData
112 offset: 0x78 Request Frame (bit30 == 1)
[all …]
|
| /Documentation/hid/ |
| D | hid-alps.rst | 12 Vendor ID 0x044E
13 Product ID 0x120B
14 Version ID 0x0121
24 0 wHIDDescLength 001E Length of HID Descriptor : 30 bytes
26 4 wReportDescLength 00B2 Report Descriptor is 178 Bytes (0x00B2)
34 20 wVendorID 044E Vendor ID 0x044E
35 22 wProductID 120B Product ID 0x120B
75 Byte2 Address - Byte 0 (LSB)
83 Command Byte is read=0xD1/write=0xD2.
95 Byte2 Address - Byte 0 (LSB)
[all …]
|
| /Documentation/admin-guide/ |
| D | tainted-kernels.rst | 30 CPU: 0 PID: 4424 Comm: insmod Tainted: P W O 4.20.0-0.rc6.fc30 #1
32 RIP: 0010:my_oops_init+0x13/0x1000 [kpanic]
51 ``cat /proc/sys/kernel/tainted``. If that returns ``0``, the kernel is not
61 * Proprietary module was loaded (#0)
85 0 G/P 1 proprietary module was loaded
112 0) ``G`` if all modules loaded have a GPL or compatible license, ``P`` if
|
| /Documentation/filesystems/ext4/ |
| D | directory.rst | 27 directory entries are signified by inode = 0. By default the filesystem
44 * - 0x0
48 * - 0x4
52 * - 0x6
56 * - 0x8
76 * - 0x0
80 * - 0x4
84 * - 0x6
88 * - 0x7
92 * - 0x8
[all …]
|
| /Documentation/translations/zh_CN/arch/loongarch/ |
| D | introduction.rst | 98 0x0 当前模式信息 CRMD
99 0x1 异常前模式信息 PRMD
100 0x2 扩展部件使能 EUEN
101 0x3 杂项控制 MISC
102 0x4 异常配置 ECFG
103 0x5 异常状态 ESTAT
104 0x6 异常返回地址 ERA
105 0x7 出错(Faulting)虚拟地址 BADV
106 0x8 出错(Faulting)指令字 BADI
107 0xC 异常入口地址 EENTRY
[all …]
|