| /Documentation/devicetree/bindings/net/ |
| D | mdio-mux-gpio.yaml | 39 pair of GPIO lines. Child busses 2 and 3 populated with 4
44 gpios = <&gpio1 3 0>, <&gpio1 4 0>;
56 marvell,reg-init = <3 0x10 0 0x5777>,
57 <3 0x11 0 0x00aa>,
58 <3 0x12 0 0x4105>,
59 <3 0x13 0 0x0a60>;
65 marvell,reg-init = <3 0x10 0 0x5777>,
66 <3 0x11 0 0x00aa>,
67 <3 0x12 0 0x4105>,
68 <3 0x13 0 0x0a60>;
[all …]
|
| /Documentation/hwmon/ |
| D | ir35221.rst | 44 curr[2-3]_label "iout[1-2]"
45 curr[2-3]_input Measured output current
46 curr[2-3]_crit Critical maximum current
47 curr[2-3]_crit_alarm Current critical high alarm
48 curr[2-3]_highest Highest output current
49 curr[2-3]_lowest Lowest output current
50 curr[2-3]_max Maximum current
51 curr[2-3]_max_alarm Current high alarm
62 in[2-3]_label "vout[1-2]"
63 in[2-3]_input Measured output voltage
[all …]
|
| D | lt7182s.rst | 50 curr[3-4]_label "iout[1-2]"
51 curr[3-4]_input Measured output current
52 curr[3-4]_highest Highest measured output current
53 curr[3-4]_max Maximum output current
54 curr[3-4]_max_alarm Output current high alarm
67 in[3-5]_label "vmon[1-3]"
68 in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
72 in[3-4|6-7]_label "vout[1-2]"
73 in[3-4|6-7]_input Measured output voltage
74 in[3-4|6-7]_highest Highest measured output voltage
[all …]
|
| D | mp2856.rst | 52 - indexes 2, 3 for "iout";
54 **curr[1-3]_alarm**
56 **curr[1-3]_input**
58 **curr[1-3]_label**
63 - indexes 2, 3 for "vout";
65 **in[1-3]_crit**
67 **in[1-3]_crit_alarm**
69 **in[1-3]_input**
71 **in[1-3]_label**
73 **in[1-3]_lcrit**
[all …]
|
| D | isl68137.rst | 410 single-rail devices, '2rail' for dual-rail devices, '3rail' for 3-rail devices,
439 curr[2-3]_label "iout[1-2]"
440 curr[2-3]_input Measured output current
441 curr[2-3]_crit Critical maximum current
442 curr[2-3]_crit_alarm Current critical high alarm
451 in[2-3]_label "vout[1-2]"
452 in[2-3]_input Measured output voltage
453 in[2-3]_lcrit Critical minimum output voltage
454 in[2-3]_lcrit_alarm Output voltage critical low alarm
455 in[2-3]_crit Critical maximum output voltage
[all …]
|
| D | dme1737.rst | 63 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
64 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
66 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
70 Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
74 For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
95 in1: Vccp (processor core) 0V - 3V
115 in1: Vccp (processor core) 0V - 3V
125 in1: Vccp (processor core) 0V - 3V
141 Celsius. The chip also features offsets for all 3 temperature inputs which -
173 This chip features 5 PWM outputs. PWM outputs 1-3 are associated with fan
[all …]
|
| /Documentation/networking/device_drivers/ethernet/3com/ |
| D | vortex.rst | 4 3Com Vortex device driver
12 This document describes the usage and errata of the 3Com "Vortex" device
13 driver for Linux, 3c59x.c.
29 3c575-series Cardbus cards which used to be handled by 3c575_cb.c.
33 - 3c590 Vortex 10Mbps
34 - 3c592 EISA 10Mbps Demon/Vortex
35 - 3c597 EISA Fast Demon/Vortex
36 - 3c595 Vortex 100baseTx
37 - 3c595 Vortex 100baseT4
38 - 3c595 Vortex 100base-MII
[all …]
|
| D | 3c509.rst | 4 Linux and the 3Com EtherLink III Series Ethercards (driver v1.18c and higher)
8 of the 3c509 driver. You should not use the driver without reading this file.
20 The following are notes and information on using the 3Com EtherLink III series
22 card's 3Com model number, 3c509. They are all 10mb/s ISA-bus cards and shouldn't
23 be (but sometimes are) confused with the similarly-numbered PCI-bus "3c905"
24 (aka "Vortex" or "Boomerang") series. Kernel support for the 3c509 family is
25 provided by the module 3c509.c, which has code to support all of the following
28 - 3c509 (original ISA card)
29 - 3c509B (later revision of the ISA card; supports full-duplex)
30 - 3c589 (PCMCIA)
[all …]
|
| /Documentation/devicetree/bindings/iio/imu/ |
| D | adi,adis16475.yaml | 21 - adi,adis16475-3
24 - adi,adis16477-3
28 - adi,adis16465-3
31 - adi,adis16467-3
36 - adi,adis16505-3
39 - adi,adis16507-3
41 - adi,adis16575-3
43 - adi,adis16576-3
45 - adi,adis16577-3
80 3 - pulse_sync
[all …]
|
| /Documentation/devicetree/bindings/pci/ |
| D | intel,ixp4xx-pci.yaml | 74 #address-cells = <3>;
88 <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
89 <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
90 <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
91 <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
92 <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
93 <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
94 <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
95 <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
96 <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
[all …]
|
| /Documentation/devicetree/bindings/pinctrl/ |
| D | fsl,imx6sx-pinctrl.txt | 20 PAD_CTL_PUS_22K_UP (3 << 14)
26 PAD_CTL_SPEED_HIGH (3 << 6)
27 PAD_CTL_DSE_DISABLE (0 << 3)
28 PAD_CTL_DSE_260ohm (1 << 3)
29 PAD_CTL_DSE_130ohm (2 << 3)
30 PAD_CTL_DSE_87ohm (3 << 3)
31 PAD_CTL_DSE_65ohm (4 << 3)
32 PAD_CTL_DSE_52ohm (5 << 3)
33 PAD_CTL_DSE_43ohm (6 << 3)
34 PAD_CTL_DSE_37ohm (7 << 3)
|
| D | fsl,imx6q-pinctrl.txt | 19 PAD_CTL_PUS_22K_UP (3 << 14)
25 PAD_CTL_SPEED_HIGH (3 << 6)
26 PAD_CTL_DSE_DISABLE (0 << 3)
27 PAD_CTL_DSE_240ohm (1 << 3)
28 PAD_CTL_DSE_120ohm (2 << 3)
29 PAD_CTL_DSE_80ohm (3 << 3)
30 PAD_CTL_DSE_60ohm (4 << 3)
31 PAD_CTL_DSE_48ohm (5 << 3)
32 PAD_CTL_DSE_40ohm (6 << 3)
33 PAD_CTL_DSE_34ohm (7 << 3)
|
| D | fsl,imx6dl-pinctrl.txt | 19 PAD_CTL_PUS_22K_UP (3 << 14)
25 PAD_CTL_SPEED_HIGH (3 << 6)
26 PAD_CTL_DSE_DISABLE (0 << 3)
27 PAD_CTL_DSE_240ohm (1 << 3)
28 PAD_CTL_DSE_120ohm (2 << 3)
29 PAD_CTL_DSE_80ohm (3 << 3)
30 PAD_CTL_DSE_60ohm (4 << 3)
31 PAD_CTL_DSE_48ohm (5 << 3)
32 PAD_CTL_DSE_40ohm (6 << 3)
33 PAD_CTL_DSE_34ohm (7 << 3)
|
| D | fsl,imx6sl-pinctrl.txt | 20 PAD_CTL_PUS_22K_UP (3 << 14)
26 PAD_CTL_SPEED_HIGH (3 << 6)
27 PAD_CTL_DSE_DISABLE (0 << 3)
28 PAD_CTL_DSE_240ohm (1 << 3)
29 PAD_CTL_DSE_120ohm (2 << 3)
30 PAD_CTL_DSE_80ohm (3 << 3)
31 PAD_CTL_DSE_60ohm (4 << 3)
32 PAD_CTL_DSE_48ohm (5 << 3)
33 PAD_CTL_DSE_40ohm (6 << 3)
34 PAD_CTL_DSE_34ohm (7 << 3)
|
| D | fsl,imx6sll-pinctrl.txt | 21 PAD_CTL_PUS_22K_UP (3 << 14)
27 PAD_CTL_SPEED_HIGH (3 << 6)
28 PAD_CTL_DSE_DISABLE (0 << 3)
29 PAD_CTL_DSE_260ohm (1 << 3)
30 PAD_CTL_DSE_130ohm (2 << 3)
31 PAD_CTL_DSE_87ohm (3 << 3)
32 PAD_CTL_DSE_65ohm (4 << 3)
33 PAD_CTL_DSE_52ohm (5 << 3)
34 PAD_CTL_DSE_43ohm (6 << 3)
35 PAD_CTL_DSE_37ohm (7 << 3)
|
| /Documentation/devicetree/bindings/phy/ |
| D | apm-xgene-phy.txt | 11 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI).
19 Two set of 3-tuple setting for each (up to 3)
25 Two set of 3-tuple setting for each (up to 3)
27 - apm,tx-boost-gain : Frequency boost AC (LSB 3-bit) and DC (2-bit)
28 gain control. Two set of 3-tuple setting for each
29 (up to 3) supported link speed on the host. Range is
30 between 0 to 31 in unit of dB. Default is 3.
31 - apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for
32 each (up to 3) supported link speed on the host.
36 3-tuple setting for each (up to 3) supported link
[all …]
|
| /Documentation/userspace-api/media/v4l/ |
| D | pixfmt-rgb.rst | 58 word [15:0] laid out at as [R\ :sub:`4` R\ :sub:`3` R\ :sub:`2` R\ :sub:`1`
59 R\ :sub:`0` G\ :sub:`5` G\ :sub:`4` G\ :sub:`3` G\ :sub:`2` G\ :sub:`1`
60 G\ :sub:`0` B\ :sub:`4` B\ :sub:`3` B\ :sub:`2` B\ :sub:`1` B\ :sub:`0`], and
61 stored in memory in two bytes, [R\ :sub:`4` R\ :sub:`3` R\ :sub:`2` R\ :sub:`1`
62 R\ :sub:`0` G\ :sub:`5` G\ :sub:`4` G\ :sub:`3`] followed by [G\ :sub:`2`
63 G\ :sub:`1` G\ :sub:`0` B\ :sub:`4` B\ :sub:`3` B\ :sub:`2` B\ :sub:`1`
84 - :cspan:`7` Byte 3
91 - 3
100 - 3
109 - 3
[all …]
|
| /Documentation/devicetree/bindings/iio/proximity/ |
| D | semtech,sx9324.yaml | 44 Array of 3 entries. Index represent the id of the CS pin.
46 Each of the 3 pins have the following value -
50 3 : grounded.
51 For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
53 enum: [ 0, 1, 2, 3 ]
54 minItems: 3
55 maxItems: 3
61 enum: [ 0, 1, 2, 3 ]
62 minItems: 3
63 maxItems: 3
[all …]
|
| /Documentation/input/devices/ |
| D | elantech.rst | 17 3. Differentiating hardware versions
27 5.2.3 Two finger touch
28 6. Hardware version 3
38 7.2.3 Motion packet
39 8. Trackpoint (for Hardware version 3 and 4)
50 hardware versions unimaginatively called version 1,version 2, version 3
54 and width of the touch. Hardware version 3 uses 6 bytes per packet (and
56 of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can
60 Some Hardware version 3 and version 4 also have a trackpoint which uses a
118 calculating a parity bit for the last 3 bytes of each packet. The driver
[all …]
|
| /Documentation/admin-guide/media/ |
| D | dvb_intro.rst | 176 CODE_RATE_HP = 3/4
177 CODE_RATE_LP = 3/4
191 CODE_RATE_HP = 3/4
192 CODE_RATE_LP = 3/4
206 CODE_RATE_HP = 3/4
207 CODE_RATE_LP = 3/4
213 [ABC TV 3]
221 CODE_RATE_HP = 3/4
222 CODE_RATE_LP = 3/4
236 CODE_RATE_HP = 3/4
[all …]
|
| /Documentation/fb/ |
| D | viafb.modes | 33 geometry 480 640 480 640 32 timings 39722 72 24 19 1 48 3 endmode
41 # 8 chars 3 lines
54 geometry 640 480 640 480 32 timings 31747 120 16 16 1 64 3 endmode
62 # 7 chars 3 lines
75 geometry 640 480 640 480 32 timings 27777 80 56 25 1 56 3 endmode
83 # 8 chars 3 lines
96 geometry 640 480 640 480 32 timings 23168 104 40 25 1 64 3 endmode
104 # 8 chars 3 lines
117 geometry 640 480 640 480 32 timings 19081 104 40 31 1 64 3 endmode
125 # 9 chars 3 lines
[all …]
|
| /Documentation/translations/zh_CN/core-api/ |
| D | packing.rst | 63 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
64 3 2 1 0
77 24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
78 3 2 1 0
83 3. 如果设置了QUIRK_LITTLE_ENDIAN，我们按如下方式操作：
89 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
90 0 1 2 3
102 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
103 0 1 2 3
110 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
[all …]
|
| /Documentation/driver-api/media/drivers/ccs/ |
| D | ccs-regs.asc | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
26 - e GBRG 3
31 - f minor 0 3
43 - e mp 3
56 - f rows 0 3
64 - e black_pixel 3
80 - e black_pixel 3
115 - f rows 0 3
147 - e csi_2_cphy 3
190 - b reset_sync 3
[all …]
|
| /Documentation/gpu/amdgpu/ |
| D | dgpu-asic-info-table.csv | 3 AMD Radeon HD 7800 /7900 /FireGL Series, TAHITI, DCE 6, 6, VCE 1 / UVD 3, --
4 AMD Radeon R7 (TM|HD) M265 /M370 /8500M /8600 /8700 /8700M, OLAND, DCE 6, 6, VCE 1 / UVD 3, --
5 AMD Radeon (TM) (HD|R7) 7800 /7970 /8800 /8970 /370/ Series, PITCAIRN, DCE 6, 6, VCE 1 / UVD 3, --
6 …|R7|R9|HD) E8860 /M360 /7700 /7800 /8800 /9000(M) /W4100 Series, VERDE, DCE 6, 6, VCE 1 / UVD 3, --
10 AMD Radeon (TM) R9 200 /380 /W7100 /S7150 /M390 /M395 Series, TONGA, DCE 10, 8, VCE 3 / UVD 5, 3
11 AMD Radeon (FirePro) (TM) R9 Fury Series, FIJI, DCE 10, 8, VCE 3 / UVD 6, 3
12 …Pro WX) 5100 /E9390 /E9560 /E9565 /V7350 /7100 /P30PH, POLARIS10, DCE 11.2, 8, VCE 3.4 / UVD 6.3, 3
13 …M) (RX|Pro WX) E9260 /460 /V5300X /550 /560(X) Series, POLARIS11, DCE 11.2, 8, VCE 3.4 / UVD 6.3, 3
14 …) 500 /540(X) /550 /640 /WX2100 /WX3100 /WX200 Series, POLARIS12, DCE 11.2, 8, VCE 3.4 / UVD 6.3, 3
19 MI300 Series, AQUA_VANJARAM, *, 9.4.3, VCN 4.0.3, 4.4.2
[all …]
|
| /Documentation/devicetree/bindings/iio/dac/ |
| D | adi,ad5380.yaml | 19 - adi,ad5380-3
21 - adi,ad5381-3
23 - adi,ad5382-3
25 - adi,ad5383-3
27 - adi,ad5384-3
29 - adi,ad5390-3
31 - adi,ad5391-3
33 - adi,ad5392-3
69 compatible = "adi,ad5380-3";
|