| /Documentation/devicetree/bindings/iio/ |
| D | st,st-sensors.yaml | 4 $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#
16 - Denis Ciocca <denis.ciocca@st.com>
24 - st,h3lis331dl-accel
25 - st,lis2de12
26 - st,lis2dw12
27 - st,lis2hh12
28 - st,lis2dh12-accel
29 - st,lis2ds12
30 - st,lis302dl
31 - st,lis331dl-accel
[all …]
|
| /Documentation/devicetree/bindings/iio/accel/ |
| D | lis302.txt | 8 - compatible: should be set to "st,lis3lv02d-spi"
15 - compatible: should be set to "st,lis3lv02d"
23 - st,click-single-{x,y,z}: if present, tells the device to issue an
26 - st,click-double-{x,y,z}: if present, tells the device to issue an
29 - st,click-thresh-{x,y,z}: set the x/y/z axis threshold
30 - st,click-click-time-limit: click time limit, from 0 to 127.5msec
32 - st,click-latency: click latency, from 0 to 255 msec with
34 - st,click-window: click window, from 0 to 255 msec with
36 - st,irq{1,2}-disable: disable IRQ 1/2
37 - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition
[all …]
|
| /Documentation/devicetree/bindings/arm/stm32/ |
| D | stm32.yaml | 10 - Alexandre Torgue <alexandre.torgue@foss.st.com>
21 - const: st,stm32mp157
24 - st,stm32f429i-disco
25 - st,stm32429i-eval
26 - const: st,stm32f429
29 - st,stm32f469i-disco
30 - const: st,stm32f469
33 - st,stm32f746-disco
34 - st,stm32746g-eval
35 - const: st,stm32f746
[all …]
|
| D | st,stm32-syscon.yaml | 4 $id: http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#
10 - Alexandre Torgue <alexandre.torgue@foss.st.com>
11 - Christophe Roullier <christophe.roullier@foss.st.com>
18 - st,stm32-power-config
19 - st,stm32-syscfg
20 - st,stm32-tamp
21 - st,stm32f4-gcan
22 - st,stm32mp151-pwr-mcu
23 - st,stm32mp157-syscfg
24 - st,stm32mp25-syscfg
[all …]
|
| /Documentation/devicetree/bindings/iio/imu/ |
| D | st,lsm6dsx.yaml | 4 $id: http://devicetree.org/schemas/iio/imu/st,lsm6dsx.yaml#
19 - st,lsm6ds3
20 - st,lsm6ds3h
21 - st,lsm6dsl
22 - st,lsm6dsm
23 - st,ism330dlc
24 - st,lsm6dso
25 - st,asm330lhh
26 - st,lsm6dsox
27 - st,lsm6dsr
[all …]
|
| /Documentation/devicetree/bindings/mfd/ |
| D | st,stmpe.yaml | 4 $id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
23 - st,stmpe601
24 - st,stmpe801
25 - st,stmpe811
26 - st,stmpe1600
27 - st,stmpe1601
28 - st,stmpe2401
29 - st,stmpe2403
46 st,autosleep-timeout:
51 st,sample-time:
[all …]
|
| /Documentation/devicetree/bindings/arm/ |
| D | ux500.yaml | 18 - description: ST-Ericsson HREF (pre-v60)
20 - const: st-ericsson,mop500
21 - const: st-ericsson,u8500
23 - description: ST-Ericsson HREF520
25 - const: st-ericsson,href520
26 - const: st-ericsson,u8500
28 - description: ST-Ericsson HREF (v60+)
30 - const: st-ericsson,hrefv60+
31 - const: st-ericsson,u8500
36 - const: st-ericsson,u9500
[all …]
|
| D | sti.yaml | 7 title: ST STi Platforms
10 - Patrice Chotard <patrice.chotard@foss.st.com>
18 - const: st,stih407-b2120
19 - const: st,stih407
22 - st,stih410-b2120
23 - st,stih410-b2260
24 - const: st,stih410
27 - st,stih418-b2199
28 - st,stih418-b2264
29 - const: st,stih418
|
| /Documentation/devicetree/bindings/sound/ |
| D | st,sta350.txt | 7 - compatible: "st,sta350"
22 - st,output-conf: number, Selects the output configuration:
30 - st,ch1-output-mapping: Channel 1 output mapping
31 - st,ch2-output-mapping: Channel 2 output mapping
32 - st,ch3-output-mapping: Channel 3 output mapping
39 - st,thermal-warning-recover:
42 - st,thermal-warning-adjustment:
45 - st,fault-detect-recovery:
48 - st,ffx-power-output-mode: string
56 - st,drop-compensation-ns: number
[all …]
|
| D | st,sta32x.txt | 7 - compatible: "st,sta32x"
26 - st,output-conf: number, Selects the output configuration:
34 - st,ch1-output-mapping: Channel 1 output mapping
35 - st,ch2-output-mapping: Channel 2 output mapping
36 - st,ch3-output-mapping: Channel 3 output mapping
43 - st,thermal-warning-recover:
46 - st,fault-detect-recovery:
49 - st,thermal-warning-adjustment:
52 - st,fault-detect-recovery:
55 - st,drop-compensation-ns: number
[all …]
|
| D | st,sti-asoc-card.txt | 14 - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out",
15 "st,stih407-uni-player-dac", "st,stih407-uni-player-spdif",
16 "st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi",
18 - st,syscfg: phandle to boot-device system configuration registers
35 "tx" for "st,sti-uni-player" compatibility
36 "rx" for "st,sti-uni-reader" compatibility
38 Required properties ("st,sti-uni-player" compatibility only):
48 - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs.
55 compatible = "st,stih407-uni-player-hdmi";
57 st,syscfg = <&syscfg_core>;
[all …]
|
| /Documentation/devicetree/bindings/clock/st/ |
| D | st,clkgen-pll.txt | 1 Binding for a ST pll clock driver.
7 [2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
12 "st,clkgen-pll0"
13 "st,clkgen-pll0-a0"
14 "st,clkgen-pll0-c0"
15 "st,clkgen-pll1"
16 "st,clkgen-pll1-c0"
17 "st,stih407-clkgen-plla9"
18 "st,stih418-clkgen-plla9"
29 compatible = "st,clkgen-c32";
[all …]
|
| D | st,clkgen.txt | 34 [3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
35 [4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
36 [7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
37 [8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
46 compatible = "st,clkgen-c32";
51 compatible = "st,clkgen-pll0";
59 compatible = "st,flexgen";
|
| /Documentation/devicetree/bindings/mmc/ |
| D | arm,pl18x.yaml | 59 - st,stm32-sdmmc2
60 - st,stm32mp25-sdmmc2
94 be discovered. On ST Micro variants, a second register window may be
109 st,sig-dir-dat0:
111 description: ST Micro-specific property, bus signal direction pins used for
114 st,sig-dir-dat2:
116 description: ST Micro-specific property, bus signal direction pins used for
119 st,sig-dir-dat31:
121 description: ST Micro-specific property, bus signal direction pins used for
124 st,sig-dir-dat74:
[all …]
|
| /Documentation/devicetree/bindings/net/ |
| D | stm32-dwmac.yaml | 11 - Alexandre Torgue <alexandre.torgue@foss.st.com>
12 - Christophe Roullier <christophe.roullier@foss.st.com>
23 - st,stm32-dwmac
24 - st,stm32mp1-dwmac
25 - st,stm32mp13-dwmac
26 - st,stm32mp25-dwmac
35 - st,stm32mp25-dwmac
39 - st,stm32mp1-dwmac
40 - st,stm32mp13-dwmac
44 - st,stm32-dwmac
[all …]
|
| /Documentation/devicetree/bindings/iio/adc/ |
| D | st,stm32-dfsdm-adc.yaml | 4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
10 - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
11 - Olivier Moysan <olivier.moysan@foss.st.com>
28 - st,stm32h7-dfsdm
29 - st,stm32mp1-dfsdm
85 - st,stm32-dfsdm-adc
86 - st,stm32-dfsdm-dmic
95 st,adc-channels:
99 - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
100 - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
[all …]
|
| D | st,stm32-adc.yaml | 4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
22 - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
27 - st,stm32f4-adc-core
28 - st,stm32h7-adc-core
29 - st,stm32mp1-adc-core
30 - st,stm32mp13-adc-core
61 st,max-clk-rate-hz:
81 st,syscfg:
107 const: st,stm32f4-adc-core
121 st,max-clk-rate-hz:
[all …]
|
| /Documentation/devicetree/bindings/rtc/ |
| D | st,m41t80.yaml | 4 $id: http://devicetree.org/schemas/rtc/st,m41t80.yaml#
7 title: ST M41T80 family of RTC and compatible
15 - st,m41t62
16 - st,m41t65
17 - st,m41t80
18 - st,m41t81
19 - st,m41t81s
20 - st,m41t82
21 - st,m41t83
22 - st,m41t84
[all …]
|
| /Documentation/devicetree/bindings/interrupt-controller/ |
| D | st,stih407-irq-syscfg.yaml | 4 $id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml#
10 - Patrice Chotard <patrice.chotard@foss.st.com>
19 const: st,stih407-irq-syscfg
21 st,syscfg:
25 st,irq-device:
32 st,fiq-device:
39 st,invert-ext:
48 - st,syscfg
49 - st,irq-device
50 - st,fiq-device
[all …]
|
| /Documentation/devicetree/bindings/i2c/ |
| D | st,stm32-i2c.yaml | 4 $id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml#
10 - Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
19 - st,stm32f7-i2c
20 - st,stm32mp13-i2c
21 - st,stm32mp15-i2c
22 - st,stm32mp25-i2c
32 st,syscfg-fmp: false
39 - st,stm32f4-i2c
50 - st,stm32f4-i2c
51 - st,stm32f7-i2c
[all …]
|
| /Documentation/devicetree/bindings/soc/sti/ |
| D | st,sti-syscon.yaml | 4 $id: http://devicetree.org/schemas/soc/sti/st,sti-syscon.yaml#
10 - Patrice Chotard <patrice.chotard@foss.st.com>
21 - st,stih407-core-syscfg
22 - st,stih407-flash-syscfg
23 - st,stih407-front-syscfg
24 - st,stih407-lpm-syscfg
25 - st,stih407-rear-syscfg
26 - st,stih407-sbc-reg-syscfg
27 - st,stih407-sbc-syscfg
40 const: st,stih407-sas-codec
[all …]
|
| /Documentation/devicetree/bindings/gpio/ |
| D | spear_spics.txt | 1 === ST Microelectronics SPEAr SPI CS Driver ===
17 * compatible: should be defined as "st,spear-spics-gpio"
19 * st-spics,peripcfg-reg: peripheral configuration register offset
20 * st-spics,sw-enable-bit: bit offset to enable sw control
21 * st-spics,cs-value-bit: bit offset to drive chipselect low or high
22 * st-spics,cs-enable-mask: chip select number bit mask
23 * st-spics,cs-enable-shift: chip select number program offset
32 compatible = "st,spear-spics-gpio";
34 st-spics,peripcfg-reg = <0x3b0>;
35 st-spics,sw-enable-bit = <12>;
[all …]
|
| /Documentation/devicetree/bindings/memory-controllers/ |
| D | st,stm32-fmc2-ebi-props.yaml | 4 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
7 title: Peripheral properties for ST FMC2 Controller
10 - Christophe Kerello <christophe.kerello@foss.st.com>
14 st,fmc2-ebi-cs-transaction-type:
33 st,fmc2-ebi-cs-cclk-enable:
40 st,fmc2-ebi-cs-mux-enable:
46 st,fmc2-ebi-cs-buswidth:
52 st,fmc2-ebi-cs-waitpol-high:
57 st,fmc2-ebi-cs-waitcfg-enable:
64 st,fmc2-ebi-cs-wait-enable:
[all …]
|
| /Documentation/devicetree/bindings/mtd/ |
| D | st-fsm.txt | 1 * ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
4 - compatible : Should be "st,spi-fsm"
11 - st,syscfg : Phandle to boot-device system configuration registers
12 - st,boot-device-reg : Address of the aforementioned boot-device register(s)
13 - st,boot-device-spi : Expected boot-device value if booted via this device
17 compatible = "st,spi-fsm";
21 st,syscfg = <&syscfg_rear>;
22 st,boot-device-reg = <0x958>;
23 st,boot-device-spi = <0x1a>;
|
| /Documentation/devicetree/bindings/phy/ |
| D | phy-stm32-usbphyc.yaml | 27 - Amelie Delaunay <amelie.delaunay@foss.st.com>
31 const: st,stm32mp1-usbphyc
94 st,current-boost-microamp:
98 st,no-lsfs-fb-cap:
102 st,decrease-hs-slew-rate:
106 st,tune-hs-dc-level:
118 st,enable-fs-rftime-tuning:
122 st,enable-hs-rftime-reduction:
126 st,trim-hs-current:
150 st,trim-hs-impedance:
[all …]
|