_fini _init __cxa_finalize __deregister_frame_info __register_frame_info chnl_check_registered chnl_exit chnl_get_context chnl_get_ctx_by_id chnl_get_ctx_by_type chnl_get_vpu_state chnl_init chnl_module_exit chnl_module_init chnl_notify chnl_proc_show chnl_query_state chnl_register chnl_register_vpu chnl_resume_schedule chnl_schedule_at_once chnl_set_task_priority chnl_stop_schedule chnl_unregister chnl_unregister_vpu cmpi_register_module cmpi_unregister_module fprintf g_chnl_ctx memset_s osal_create_proc_entry osal_printk osal_remove_proc_entry osal_spin_lock_destroy osal_spin_lock_init stderr __assert_fail __gettimeofday_time64 __stack_chk_fail __stack_chk_guard chnl_check_reg_info chnl_check_unreg_info chnl_check_vpu_info chnl_timer_int_handler chnl_timer_isr chnl_vedu_int_handler chnl_vedu_isr chnl_wait_condition_call_back chnl_watch_dog_timer_isr g_chnl_low_power g_chnl_state g_proc_enable memcpy_s osal_del_timer osal_dmb osal_dsb osal_free_irq osal_isb osal_request_irq osal_set_timer osal_spin_lock_irqsave osal_spin_unlock_irqrestore osal_timer_destroy osal_timer_get_private_data osal_timer_init osal_vfree osal_vmalloc osal_wait_destroy osal_wait_init osal_wait_uninterruptible osal_wakeup printf schedule_at_once osal_seq_printf chnl_mod_exit chnl_mod_init libc.so
[Func]:%s [Line]:%d [Info]:there's no chnl_ctx available! [Func]:%s [Line]:%d [Info]:CHNL exit sched table failed! VpuCnt StartCost -----SCHEDULER %d INFO------------------------------------------------ %8s%12s%12s%12s%12s%12s%12s%12s%12s [Func]:%s [Line]:%d [Info]:CHNL module init failed for registermod failed chnl_check_vpu_info [Func]:%s [Line]:%d [Info]:vpu_num %d in vpu information error!(%d, %d] [Func]:%s [Line]:%d [Info]:CHNL can't been find [Func]:%s [Line]:%d [Info]:stop channel failed for chnl type not registered [Func]:%s [Line]:%d [Info]:stop channel failed for chnl not registed! ret == HI_SUCCESS ErrCnt IntPro [Func]:%s [Line]:%d [Info]:chnl %d spin lock init err. chnl_check_reg_info [Func]:%s [Line]:%d [Info]:proc last interrupt error! %s :watchdog here. chnl_check_registered IntCnt -----SCHEDULER:%d--CHNL PERF--------------------------------------------- chnl_stop_schedule chnl_init [Func]:%s [Line]:%d [Info]:vpu(%d) register irq:%u failure chnl Hi3516CV500 [Func]:%s [Line]:%d [Info]:stop channel failed for chnl type out of range [Func]:%s [Line]:%d [Info]:unregister channel failed for chnl type not support! chnl int_proc_func err! %d chnl_init_schd_tab Config VpuName vedu_chn.c [Func]:%s [Line]:%d [Info]:chnl add one task err! ASSERT at: >Function : %s >Line No. : %d >Condition: %s chnl_vedu_isr [CHNL] Version: [Hi3516CV500_MPP_V1.0.0.1 B010 Release], Build Time[Jul 13 2021, 09:44:21] %8d%8s%8s%12d%12d%12d%8d%12d%12d%12d%12d%8d HWCostL %s %d stop channel failed for chnl not registed!,type : %d ,chnl_id: %d chnl_reset_vpu %8s%8s%8s%12s%12s%12s%8s%12s%12s%12s%12s%8s [Func]:%s [Line]:%d [Info]:unregister channel failed for chnl type out of range VpuId chnl_timer_int_handler [Func]:%s [Line]:%d [Info]:There's no last_chnl_task available! [Func]:%s [Line]:%d [Info]:There's no vpu available! [Func]:%s [Line]:%d [Info]:chnl has been stopped StartOk Type IntCost %8s%12s%12s%12s 0 ChnlId TskNum schedule_at_once [Func]:%s [Line]:%d [Info]:register channel failed for chnl type(%u) not support! chnl_init_vpu Prio %8d%12s%12d%12s No running channel here [Func]:%s [Line]:%d [Info]:CHNL module create proc failed! [Func]:%s [Line]:%d [Info]:There's no chnl_ctx available! [Func]:%s [Line]:%d [Info]:regist chnl style(%u) err -----SCHEDULER:%d--VPU INFO---------------------------------------------- chnl_get_vpu_state chnl_exit chnl_exit_schd_tab Name IntCostL HWCycle unload chnl.ko chnl_proc_last_int %10d%10d [Func]:%s [Line]:%d [Info]:chnl(%d) not registed! chnl_resume_schedule %8d%8d%8s%8d%8s%12d%12d%12d%12d [Func]:%s [Line]:%d [Info]:secure func call error [Func]:%s [Line]:%d [Info]:register channel failed for chnl type out of range [Func]:%s [Line]:%d [Info]:There's no ctx available! [Func]:%s [Line]:%d [Info]:register channel failed for the chnl already exist [Func]:%s [Line]:%d [Info]:unregister channel failed for chnl not registed [Func]:%s [Line]:%d [Info]:vmalloc error! [Func]:%s [Line]:%d [Info]:you must stop schedule this channel firstly! [Func]:%s [Line]:%d [Info]:chnl reset vpu %d! [Func]:%s [Line]:%d [Info]:this vpu has already been registed! chnl_add_one_task TimeCnt StartNo %8d%12s%12d%12d%12d%12llu%12d%12llu%12llu chnl_set_task_priority [Func]:%s [Line]:%d [Info]:CHNL hasn't been initialized chnl_start_up_chnl chnl_do_register_vpu [Func]:%s [Line]:%d [Info]: secure func call error chnl_unregister_vpu chnl_register chnl_get_one_task %10s%10s Reset load chnl.ko chnl_check_unreg_info %s %d,chn_id:%d next_chnl->state err %d %s %d, chn_id:%d chn_tcb->state err %d SchdlId %8s%8s%8s%8s%8s%12s%12s%12s%12s [Func]:%s [Line]:%d [Info]:NULL pointer for input chnl_watch_dog_timer_isr chnl_get_one_tsk_for_priority Total Chnl Scheduler Count: %d -----SCHEDULER:%d--CHNL CURRENT RUN STATE-------------------------------- [Func]:%s [Line]:%d [Info]:chnl type(%u) err -----SCHEDULER:%d--CHNL STATE-------------------------------------------- chnl_timer_isr [Func]:%s [Line]:%d [Info]:find %s down,now reset it [Func]:%s [Line]:%d [Info]:There's no vir_addr available! [Func]:%s [Line]:%d [Info]:no task to del! %s %d stop channel failed for chnl type(%d) out of range,chnl_id: %d chnl_register_vpu [Func]:%s [Line]:%d [Info]:channel id is extand max channle count that CHNL support [Func]:%s [Line]:%d [Info]:chnl is been stopping now. HWCost HWCostAcc %s %d stop channel failed for chnl type(%d) not registered,chnl_id: %d [Func]:%s [Line]:%d [Info]:register channel failed for the chnl number excess the max chnl number allowing to regist! chnl_del_one_task VpuNum State InqCnt chnl_module_init %s for %s...OK! chnl_schedule_at_once chnl_unregister PAUSE RUN H264E H264D H265E H265D JPEGE JPEGD PRORES NONE INIT IDLE READY RUN WAIT
chnl v Dw q q : P 4g l \` e V H] _ s Y t
Linker: LLD 10.0.1 (/data/62608-merged/toolchain/llvm-project/lld edbc9c219ecd6a6c7f4c3125524a9fc2c4bc57f6) OHOS () clang version 10.0.1.62608 (llvm-project edbc9c219ecd6a6c7f4c3125524a9fc2c4bc57f6)
.dynsym .gnu.hash .hash .dynstr .rel.dyn .ARM.exidx .rel.plt .rodata .eh_frame_hdr .eh_frame .text .init .fini .plt .init_array .fini_array .dynamic .got .got.plt .data .bss .ARM.attributes .comment .shstrtab
[Func]:%s [Line]:%d [Info]:there's no chnl_ctx available! [Func]:%s [Line]:%d [Info]:CHNL exit sched table failed! VpuCnt StartCost -----SCHEDULER %d INFO------------------------------------------------ %8s%12s%12s%12s%12s%12s%12s%12s%12s [Func]:%s [Line]:%d [Info]:CHNL module init failed for registermod failed chnl_check_vpu_info [Func]:%s [Line]:%d [Info]:vpu_num %d in vpu information error!(%d, %d] [Func]:%s [Line]:%d [Info]:CHNL can't been find [Func]:%s [Line]:%d [Info]:stop channel failed for chnl type not registered [Func]:%s [Line]:%d [Info]:stop channel failed for chnl not registed! ret == HI_SUCCESS ErrCnt IntPro [Func]:%s [Line]:%d [Info]:chnl %d spin lock init err. chnl_check_reg_info [Func]:%s [Line]:%d [Info]:proc last interrupt error! %s :watchdog here. chnl_check_registered IntCnt -----SCHEDULER:%d--CHNL PERF--------------------------------------------- chnl_stop_schedule chnl_init [Func]:%s [Line]:%d [Info]:vpu(%d) register irq:%u failure chnl Hi3516CV500 [Func]:%s [Line]:%d [Info]:stop channel failed for chnl type out of range [Func]:%s [Line]:%d [Info]:unregister channel failed for chnl type not support! chnl int_proc_func err! %d chnl_init_schd_tab Config VpuName vedu_chn.c [Func]:%s [Line]:%d [Info]:chnl add one task err! ASSERT at: >Function : %s >Line No. : %d >Condition: %s chnl_vedu_isr [CHNL] Version: [Hi3516CV500_MPP_V1.0.0.1 B010 Release], Build Time[Jul 13 2021, 09:44:21] %8d%8s%8s%12d%12d%12d%8d%12d%12d%12d%12d%8d HWCostL %s %d stop channel failed for chnl not registed!,type : %d ,chnl_id: %d chnl_reset_vpu %8s%8s%8s%12s%12s%12s%8s%12s%12s%12s%12s%8s [Func]:%s [Line]:%d [Info]:unregister channel failed for chnl type out of range VpuId chnl_timer_int_handler [Func]:%s [Line]:%d [Info]:There's no last_chnl_task available! [Func]:%s [Line]:%d [Info]:There's no vpu available! [Func]:%s [Line]:%d [Info]:chnl has been stopped StartOk Type IntCost %8s%12s%12s%12s 0 ChnlId TskNum schedule_at_once [Func]:%s [Line]:%d [Info]:register channel failed for chnl type(%u) not support! chnl_init_vpu Prio %8d%12s%12d%12s No running channel here [Func]:%s [Line]:%d [Info]:CHNL module create proc failed! [Func]:%s [Line]:%d [Info]:There's no chnl_ctx available! [Func]:%s [Line]:%d [Info]:regist chnl style(%u) err -----SCHEDULER:%d--VPU INFO---------------------------------------------- chnl_get_vpu_state chnl_exit chnl_exit_schd_tab Name IntCostL HWCycle unload chnl.ko chnl_proc_last_int %10d%10d [Func]:%s [Line]:%d [Info]:chnl(%d) not registed! chnl_resume_schedule %8d%8d%8s%8d%8s%12d%12d%12d%12d [Func]:%s [Line]:%d [Info]:secure func call error [Func]:%s [Line]:%d [Info]:register channel failed for chnl type out of range [Func]:%s [Line]:%d [Info]:There's no ctx available! [Func]:%s [Line]:%d [Info]:register channel failed for the chnl already exist [Func]:%s [Line]:%d [Info]:unregister channel failed for chnl not registed [Func]:%s [Line]:%d [Info]:vmalloc error! [Func]:%s [Line]:%d [Info]:you must stop schedule this channel firstly! [Func]:%s [Line]:%d [Info]:chnl reset vpu %d! [Func]:%s [Line]:%d [Info]:this vpu has already been registed! chnl_add_one_task TimeCnt StartNo %8d%12s%12d%12d%12d%12llu%12d%12llu%12llu chnl_set_task_priority [Func]:%s [Line]:%d [Info]:CHNL hasn't been initialized chnl_start_up_chnl chnl_do_register_vpu [Func]:%s [Line]:%d [Info]: secure func call error chnl_unregister_vpu chnl_register chnl_get_one_task %10s%10s Reset load chnl.ko chnl_check_unreg_info %s %d,chn_id:%d next_chnl->state err %d %s %d, chn_id:%d chn_tcb->state err %d SchdlId %8s%8s%8s%8s%8s%12s%12s%12s%12s [Func]:%s [Line]:%d [Info]:NULL pointer for input chnl_watch_dog_timer_isr chnl_get_one_tsk_for_priority Total Chnl Scheduler Count: %d -----SCHEDULER:%d--CHNL CURRENT RUN STATE-------------------------------- [Func]:%s [Line]:%d [Info]:chnl type(%u) err -----SCHEDULER:%d--CHNL STATE-------------------------------------------- chnl_timer_isr [Func]:%s [Line]:%d [Info]:find %s down,now reset it [Func]:%s [Line]:%d [Info]:There's no vir_addr available! [Func]:%s [Line]:%d [Info]:no task to del! %s %d stop channel failed for chnl type(%d) out of range,chnl_id: %d chnl_register_vpu [Func]:%s [Line]:%d [Info]:channel id is extand max channle count that CHNL support [Func]:%s [Line]:%d [Info]:chnl is been stopping now. HWCost HWCostAcc %s %d stop channel failed for chnl type(%d) not registered,chnl_id: %d [Func]:%s [Line]:%d [Info]:register channel failed for the chnl number excess the max chnl number allowing to regist! chnl_del_one_task VpuNum State InqCnt chnl_module_init %s for %s...OK! chnl_schedule_at_once chnl_unregister PAUSE RUN H264E H264D H265E H265D JPEGE JPEGD PRORES NONE INIT IDLE READY RUN WAIT
chnl v Dw q q : P 4g l \` e V H] _ s Y t
Linker: LLD 10.0.1 (/data/62608-merged/toolchain/llvm-project/lld edbc9c219ecd6a6c7f4c3125524a9fc2c4bc57f6) OHOS () clang version 10.0.1.62608 (llvm-project edbc9c219ecd6a6c7f4c3125524a9fc2c4bc57f6)
.dynsym .gnu.hash .hash .dynstr .rel.dyn .ARM.exidx .rel.plt .rodata .eh_frame_hdr .eh_frame .text .init .fini .plt .init_array .fini_array .dynamic .got .got.plt .data .bss .ARM.attributes .comment .shstrtab