_fini _init __cxa_finalize __deregister_frame_info __register_frame_info cmpi_register_module cmpi_unregister_module fprintf g_ast_pipe_synch_ctx g_past_pipe_mkp_ctx g_vi_module_lock g_vi_status osal_atomic_dec_return osal_atomic_destroy osal_atomic_inc_return osal_atomic_init osal_atomic_read osal_atomic_set osal_createdev osal_deregisterdevice osal_destroydev osal_down_interruptible osal_registerdevice osal_up osal_wakeup printf puts stderr vi_cap_deinit vi_cap_hal_get_irq_arg vi_cap_init vi_check_chn_id vi_check_chn_id_for_ioctl vi_check_dev_id vi_check_ext_chn_id vi_check_null_ptr vi_check_phy_chn_id vi_check_phy_pipe_id vi_check_pipe_id vi_chn_attach_vb_pool vi_chn_detach_vb_pool vi_create_pipe vi_create_proc_entry vi_destroy_pipe vi_destroy_proc_entry vi_disable_chn vi_disable_dev vi_disable_pipe_interrupt vi_disable_snap_pipe vi_disable_user_pic vi_do_mod_exit vi_do_mod_init vi_do_poll vi_down_semaphore vi_drv_change_proc_seq vi_drv_check_clk_sel vi_drv_check_proc_enable_module_param vi_drv_func_pre_filter vi_drv_set_proc_power_switch vi_enable_chn vi_enable_dev vi_enable_pipe_interrupt vi_enable_snap_pipe vi_enable_user_pic vi_get_be_stt_info vi_get_chn_align vi_get_chn_attr vi_get_chn_crop vi_get_chn_frame vi_get_chn_ldc_attr vi_get_chn_ldc_drv_attr vi_get_chn_low_dealy_attr vi_get_chn_out_put_size vi_get_chn_rotation_attr vi_get_chn_rotation_ex_attr vi_get_chn_spread_attr vi_get_chn_status vi_get_dev_attr vi_get_dev_bind_pipe vi_get_dev_timing_attr vi_get_dis_attr vi_get_dis_config vi_get_dis_param vi_get_ext_chn_attr vi_get_ext_chn_fisheye vi_get_ext_chn_fisheye_drv_attr vi_get_mod_param vi_get_pipe_attr vi_get_pipe_bind_dev_size vi_get_pipe_cmp_param vi_get_pipe_dump_attr vi_get_pipe_fpn_attr vi_get_pipe_frame_interrupt_attr vi_get_pipe_hdr_attr vi_get_pipe_nrx_param vi_get_pipe_nrx_status vi_get_pipe_post_crop vi_get_pipe_pre_crop vi_get_pipe_raw vi_get_pipe_raw_source vi_get_pipe_repeat_mode vi_get_pipe_snap_status vi_get_pipe_status vi_get_pipe_vc_number vi_get_pipe_wdr_attr vi_get_pro_bnr_param vi_get_pro_sharpen_param vi_get_proc_module_param vi_get_region_luma_timeout vi_get_snap_pipe_attr vi_get_split_attr vi_init_time_ref vi_is_pipe_existed vi_isp_clear_input_queue vi_isp_get_pipe_frame_interrupt_attr vi_mod_release_frame vi_pipe_attach_vb_pool vi_pipe_detach_vb_pool vi_proc_deinit vi_proc_init vi_send_mult_pipe_raw vi_send_pipe_yuv vi_set_chn_align vi_set_chn_attr vi_set_chn_crop vi_set_chn_ldc_attr vi_set_chn_low_dealy_attr vi_set_chn_rotation_attr vi_set_chn_rotation_ex_attr vi_set_chn_spread_attr vi_set_default_mod_param vi_set_default_vi_vpss_mode vi_set_dev_attr vi_set_dev_bind_pipe vi_set_dev_timing_attr vi_set_dis_attr vi_set_dis_config vi_set_dis_param vi_set_ext_chn_attr vi_set_ext_chn_fisheye vi_set_mod_param vi_set_pipe_attr vi_set_pipe_dump_attr vi_set_pipe_fpn_attr vi_set_pipe_frame_interrupt_attr vi_set_pipe_nrx_param vi_set_pipe_post_crop vi_set_pipe_pre_crop vi_set_pipe_raw_source vi_set_pipe_repeat_mode vi_set_pipe_vc_number vi_set_pro_bnr_param vi_set_pro_sharpen_param vi_set_snap_pipe_attr vi_set_user_pic vi_set_vpss_frame_interrupt_attr vi_snap_get_isp_config vi_start_pipe vi_stop_pipe vi_synch_ctx_exit vi_synch_ctx_init vi_trigger_snap_pipe vi_up_semaphore vi_update_bayer_format vi_update_vi_vpss_mode __gettimeofday_time64 __stack_chk_fail __stack_chk_guard cmpi_get_module_func_by_id g_ast_dev_mkp_ctx g_ast_dev_synch_ctx g_mod_param g_user_pic_lock g_vi_comm_lock memcpy_s memset memset_s osal_msecs_to_jiffies osal_msleep osal_poll_wait osal_sema_destroy osal_sema_init osal_spin_lock_destroy osal_spin_lock_init osal_spin_lock_irqsave osal_spin_unlock_irqrestore osal_vfree osal_vmalloc osal_wait_destroy osal_wait_init osal_wait_timeout_interruptible vi_abnormal_verify_after_wait vi_calc_chn_time_ref vi_calc_raw_time_ref vi_cap_comm_dev_exit vi_cap_comm_dev_init vi_check_chn_attr_for_gdc vi_check_comm_crop vi_check_mod_id vi_check_mod_param vi_chn_frame_rate_statistic vi_clear_linear_pic_queue vi_clear_pic_queue vi_comm_create_one_node vi_comm_get_offline_proc_cnt vi_comm_prepare_disvb_and_info vi_comm_submit_one_node vi_create_pipe_pic_queue vi_create_queue vi_deinit_usr_pic_info vi_destory_pipe_pic_queue vi_destroy_queue vi_drv_calc_cur_pic_size vi_drv_cap_dev_ctx_init vi_drv_check_chn_ldc_attr vi_drv_check_pipe_support vi_drv_check_vi_vpss_mode vi_drv_chn_check_offline_capacity vi_drv_chn_frm_rate_ctl vi_drv_destroy_fpn_spin_lock vi_drv_enable_chn vi_drv_find_suitable_proc vi_drv_flush_be_stt_info_buf vi_drv_fpn_spin_lock_init vi_drv_free_image_process_buffer vi_drv_get_actual_split_num vi_drv_get_be_cfg vi_drv_get_be_cfg_local vi_drv_get_be_stt_info vi_drv_get_chn_attr vi_drv_get_chn_ldc_attr_set vi_drv_get_chn_ldc_drv_attr vi_drv_get_chn_out_put_size vi_drv_get_chn_out_put_size_from_user_set vi_drv_get_chn_spread_attr_set vi_drv_get_default_vi_vpss_mode vi_drv_get_frm_vb_blk vi_drv_get_mast_pipe_by_pipe vi_drv_get_pipe_bind_dev_id vi_drv_get_pipe_default_vc_number vi_drv_get_pipe_mode vi_drv_get_pipe_nrx_status vi_drv_get_pipe_pre_size vi_drv_get_proc_module_param vi_drv_get_split_attr vi_drv_get_split_num vi_drv_get_vb vi_drv_get_wdr_mode_by_pipe vi_drv_get_wdr_vc_num vi_drv_get_working_chn_attr vi_drv_hold_be_cfg vi_drv_is_chn_attr_setted vi_drv_is_ext_chn_fisheye_enable vi_drv_is_src_support vi_drv_is_support_ext_chn vi_drv_is_support_low_delay vi_drv_is_wdr_mode vi_drv_isp_be_end_int_proc vi_drv_malloc_image_process_buffer vi_drv_mark_chn_enable_flag vi_drv_need_call_gdc_function vi_drv_need_split vi_drv_online_enable_wdr_pic vi_drv_pipe_drv_ctx_exit vi_drv_pipe_drv_ctx_init vi_drv_prealloc_vb vi_drv_prepare3dnr_info vi_drv_prepare_all_phy_chn_crop vi_drv_prepare_chn_coverex_info vi_drv_prepare_chn_dest_pic_info vi_drv_prepare_chn_osd_info vi_drv_prepare_cur_pic_info vi_drv_prepare_online_scale_attr vi_drv_prepare_wdr_pic_info vi_drv_proc_reg_new_manual vi_drv_put_free_be_buf vi_drv_put_vb vi_drv_put_vb_with_ret_value vi_drv_register_rgn_capacity vi_drv_relase_fpn_frame_addr vi_drv_set_chn_ldc_attr vi_drv_set_isp_id_sel vi_drv_set_isp_sel vi_drv_set_pipe_bind_dev_id vi_drv_set_vi_vpss_mode vi_drv_stitch_sync_be_stt_info vi_drv_switch_be_stt_info vi_drv_un_register_rgn_capacity vi_drv_update_dis_offset vi_drv_update_wch_cmp_bayer_format vi_drv_update_wdr_cmp_bayer_format vi_drv_update_working_chn_drv_attr vi_drv_update_working_pipe_drv_attr vi_drv_wdr_pool_de_init vi_drv_wdr_pool_init vi_free_region_luma_buffer vi_get_chn_depth vi_get_chn_last_time_ref vi_get_vb_source vi_handle_ext_chn_pic vi_init_err_int_detect vi_init_usr_pic_info vi_is_dev_configed vi_is_dis_exist vi_is_gdc_exist vi_is_phy_chn_attach_fisheye vi_is_pipe_created vi_is_vgs_exist vi_is_wait_cap_fram_stop vi_line_mode_send_pipe_frame vi_lost_repeat_frame vi_mkp_cap_dev_ctx_init vi_mkp_create_input_queue vi_mkp_pipe_wdr_de_init vi_mkp_pipe_wdr_init vi_model_create_one_model vi_model_destroy_one_model vi_pipe_ctx_exit vi_pipe_ctx_init vi_pipe_down_sem vi_pipe_frame_rate_statistic vi_pipe_free_mem vi_pipe_malloc_mem vi_pipe_mkp_ctx_exit vi_pipe_mkp_ctx_init vi_pipe_sync_ctx_init vi_prepare_iso vi_proc_chn_frame vi_proc_comm_dev_exit vi_proc_comm_dev_init vi_proc_offline_irq_route vi_proc_send_pic vi_put_linear_frame_to_queue vi_queue_get_busy vi_queue_get_busy_num vi_queue_get_free vi_queue_put_busy vi_queue_put_free vi_queue_query_busy_tail vi_release_chn_buffer vi_release_chn_capture_vb vi_release_cur_pic vi_release_pipe_bnr_capture_vb vi_snap_proc_chn_frame vi_start_one_task vi_submit_frame2_dis vi_submit_frame2_gdc vi_submit_frame_to_vgs vi_update_chn_dis_attr vi_update_chn_gdc_attr vi_update_chn_last_time_ref vi_update_pipe_snap_ctx_from_user_set vi_update_working_chn_mkp_attr vi_update_working_pipe_chn_mkp_attr vi_update_working_pipe_mkp_attr vi_wait_capture_frame_stop vi_wait_condition_call_back vi_wdr_offline vi_wdr_offline_clear_wdr_pic_node vi_drv_check_chip_id vi_drv_check_dev_attr vi_drv_check_dev_bind_pipe vi_drv_disable_dev vi_drv_get_dev_attr vi_drv_get_dev_bind_pipe vi_drv_is_bas_enable vi_drv_set_dev_attr vi_drv_set_dev_bind_pipe vi_drv_set_dev_en is_one_buf_mode is_vi_online_mode is_vpss_online_mode osal_wait_uninterruptible vi_comm_update_first_frame_pipe_attr vi_destory_all_gdc_chn vi_destroy_dis_chn vi_destroy_dis_pool vi_destroy_user_pic vi_disable_dis vi_do_get_pipe_status vi_drv_check_fpn_attr vi_drv_check_nrx_param vi_drv_check_pipe_attr vi_drv_check_pipe_frame_interrupt_attr vi_drv_check_pipe_post_crop_attr vi_drv_check_pipe_pre_crop_attr vi_drv_check_pipe_raw_source vi_drv_check_pipe_repeat_mode vi_drv_check_pipe_static_attr vi_drv_chn_calc_crop vi_drv_disable_pipe_clock vi_drv_disable_pipe_interrupt vi_drv_disable_wch vi_drv_enable_pipe_clock vi_drv_enable_pipe_interrupt vi_drv_get_chn_rotation_attr_set vi_drv_get_chn_rotation_ex_attr_set vi_drv_get_fpn_attr vi_drv_get_pipe_attr vi_drv_get_pipe_bind_dev_id_before_init vi_drv_get_pipe_cmp_param vi_drv_get_pipe_frame_interrupt_attr vi_drv_get_pipe_nrx_param vi_drv_get_pipe_output_size vi_drv_get_pipe_post_crop vi_drv_get_pipe_pre_crop vi_drv_get_pipe_raw_source vi_drv_get_wdr_mode_from_dev vi_drv_set_chn_rotation_attr vi_drv_set_fpn_calibrate_attr vi_drv_set_fpn_correction_attr vi_drv_set_pipe_attr vi_drv_set_pipe_frame_interrupt_attr vi_drv_set_pipe_nrx_param vi_drv_set_pipe_post_crop vi_drv_set_pipe_pre_crop vi_drv_set_pipe_raw_source vi_drv_start_pipe vi_drv_stop_pipe vi_drv_update_pipe_nrx_param_flag vi_release_pipe_capture_vb vi_comm_update_first_frame_chn_attr vi_create_dis_chn vi_create_gdc_chn vi_destroy_gdc_chn vi_drv_check_chn_align vi_drv_check_chn_attr vi_drv_check_chn_crop vi_drv_check_chn_static_attr vi_drv_check_chn_static_attr_for_dis vi_drv_check_chn_static_attr_for_fisheye vi_drv_check_chn_static_attr_for_gdc vi_drv_get_chn_crop vi_drv_get_ext_chn_attr vi_drv_proc_reg_new vi_drv_set_chn_attr vi_drv_set_chn_crop vi_drv_check_ext_chn_attr vi_drv_check_ext_chn_fisheye_attr vi_drv_get_ext_chn_fisheye_attr vi_drv_get_ext_chn_fisheye_drv_attr vi_drv_get_working_ext_chn_attr vi_drv_need_do_ext_chn_fisheye vi_drv_set_ext_chn_attr vi_drv_set_ext_chn_fisheye_attr vi_submit_ext_chn_pic2_gdc vi_submit_ext_chn_pic2_other_mod vi_submit_ext_chn_pic_to_vgs vi_drv_check_chn_low_delay_attr vi_drv_get_chn_low_delay_attr vi_drv_set_chn_low_delay_attr cmpi_mmz_free cmpi_mmz_malloc_nocache osal_access_ok osal_copy_from_user osal_copy_to_user osal_printk snprintf_s vi_drv_get_chn_max_height vi_drv_get_chn_max_width vi_malloc_region_luma_buffer is_early_one_buf_mode osal_div64_u64 osal_free_irq osal_request_irq osal_seq_printf vi_comm_cap_online_frame_irq_route vi_comm_cap_prepare_frame vi_comm_cap_statistics_int_time vi_comm_capture_frame vi_comm_is_pipe_start vi_comm_lost_cfg_int_repair vi_comm_need_do_irq_route vi_comm_prepare_next_frame_pipe_chn_attr vi_comm_proc_online_send_last_frame vi_comm_proc_online_update_attr vi_comm_proc_prepare_next_chn_frame vi_comm_save_isp_info_to_pic vi_comm_send_yuv_frame_to_chn vi_comm_update_cur_crop vi_comm_user_pic_irq_route vi_drv_cap_abolish_reset vi_drv_cap_clk_reset_exit vi_drv_cap_clk_reset_init vi_drv_cap_get_id_by_irq vi_drv_cap_is_wrong_int vi_drv_cap_reg_exit vi_drv_cap_reg_init vi_drv_cap_report_int vi_drv_cap_set_int_mask vi_drv_check_wdr_capacity vi_drv_chn_check_online_capacity vi_drv_clear_any_proc_int vi_drv_clear_fe_wch_int vi_drv_free_model_buf vi_drv_get_all_cap_irq_id vi_drv_get_all_proc_irq_id vi_drv_get_cap_int_mask vi_drv_get_cap_int_status vi_drv_get_color_gamut_from_isp vi_drv_get_fe_wch_int_status vi_drv_get_fpn_calibrate_start_flag vi_drv_get_hw_cycle_cnt vi_drv_get_node_id vi_drv_get_node_weight vi_drv_get_online_proc_id_by_pipe vi_drv_get_pipe_by_proc_id vi_drv_get_proc_irq_status vi_drv_get_viproc_debug vi_drv_get_wch_vb_blk vi_drv_get_wdrvb vi_drv_get_working_pipe_attr vi_drv_get_working_pipe_dump_attr vi_drv_is_cap_valid_int vi_drv_is_proc_frame_end_irq vi_drv_is_proc_frame_start_delay_irq vi_drv_is_proc_frame_start_irq vi_drv_is_proc_id_valid vi_drv_is_proc_irq_valid vi_drv_is_proc_mode_suitable vi_drv_is_vi_proc_bus_err_int vi_drv_is_vi_proc_dcmp_err_int vi_drv_is_vi_proc_end_int vi_drv_is_vi_proc_frame_err_int vi_drv_is_vi_proc_frame_flow_int vi_drv_is_vi_proc_frame_start_int vi_drv_is_vi_proc_lost_cfg_int vi_drv_is_vi_proc_time_out_int vi_drv_is_wdr_pool_id vi_drv_isp_int_bottom_half vi_drv_isp_isr vi_drv_malloc_model_buf vi_drv_pipe_frame_rate_ctl vi_drv_prepare_next_frame_chn_attr vi_drv_prepare_next_frame_pipe_attr vi_drv_print_reg_status vi_drv_proc_abolish_reset vi_drv_proc_clk_enable vi_drv_proc_get_mode vi_drv_proc_is_lost_cfg_int vi_drv_proc_is_support_start_delay_irq vi_drv_proc_is_wrong_int vi_drv_proc_reg_exit vi_drv_proc_reg_init vi_drv_proc_reset vi_drv_proc_start_cap vi_drv_query_cap_bus_err_status vi_drv_set_fe_wch_pic_config vi_drv_set_mask vi_drv_set_next vi_drv_set_node_id vi_drv_set_single_model_cfg vi_drv_set_split_model_cfg vi_drv_set_wch_reg_newer vi_drv_set_working_pipe_post_crop vi_drv_start vi_drv_update_first_frame_pipe_flag vi_drv_update_online_wdr_crop vi_drv_update_wch_cmp_attr vi_get_wdr_frame_interval vi_is_user_pic_enable vi_node_create_node_queue vi_node_destroy_node_queue vi_node_get_busy_num vi_node_get_vi_offline_vpss_offline_wait_num vi_node_get_vi_offline_vpss_online_wait_num vi_node_node_queue_get_busy vi_node_node_queue_get_free vi_node_node_queue_get_vi_offline_vpss_offline_wait vi_node_node_queue_get_vi_offline_vpss_online_wait vi_node_node_queue_put_busy vi_node_node_queue_put_free vi_node_node_queue_put_vi_offline_vpss_offline_wait vi_node_node_queue_put_vi_offline_vpss_online_wait vi_proc_hal_get_irq_arg vi_proc_hw_statistic vi_snap_cap_send_frame vi_snap_find_pro_frame vi_snap_get_isp_config_info vi_snap_is_valid_dump_frame vi_snap_offline_is_stop_irq_proc vi_snap_online_irq_proc vi_statistic_err_int_detect vi_wdr_offline_sync_wdr_frame vi_wdr_online_update_wdr_cfg vi_queue_get_busy_tail vi_queue_get_free_num vi_queue_query_busy vi_queue_query_busy_next g_ast_pic_info vi_drv_ext_chn_check_capacity vi_drv_get_chn_coverex_info vi_drv_get_chn_coverex_num vi_drv_get_chn_crop_calc_resault vi_drv_get_chn_osd_info vi_drv_get_chn_osd_num vi_drv_put_region memcpy osal_memcmp vi_drv_get_frame_info_from_isp vi_drv_set_pipe_iso vi_drv_snap_get_online_pro_delay_int_num vi_drv_snap_is_discard_pro_frame vi_drv_snap_is_send_this_frame vi_multi_pipe_snap_trigger vi_proc_snap_attr vi_snap_proc_bnr_raw g_user_pic_comm osal_del_timer osal_set_timer osal_timer_destroy osal_timer_get_private_data osal_timer_init vi_drv_get_chn_rotation_attr_use vi_drv_check_line_raw_capacity_for_be vi_drv_check_pipe_dump_attr vi_drv_check_send_raw_in_wdr_mode vi_drv_check_wdr_raw_capacity vi_drv_check_yuv_capacity vi_drv_get_ext_chn_depth vi_drv_get_phy_chn_depth vi_drv_get_pipe_dump_attr vi_drv_get_timg_attr vi_drv_set_pipe_dump_attr vi_drv_set_timg_attr vi_put_wdr_frame_to_queue vi_wdr_mode_send_pipe_raw_from_be vi_drv_get_pipe_idx_from_bind vi_drv_get_proc_reg_by_proc_id vi_drv_set_wdr_pic_config vi_update_wdr_frame_interval wdr_drv_update_wdr_cmp_attr vi_de_init_local_dis_algorithm vi_drv_check_chn_rotate_ex_attr vi_drv_check_chn_spread_attr vi_drv_check_ext_fisheye_capacity vi_drv_check_gdc_support_pixel_format vi_drv_get_chn_ldc_attr_use vi_drv_get_chn_ldc_enalbe_use vi_drv_get_chn_ldcv2_attr_use vi_drv_get_chn_low_delay_attr_use vi_drv_get_chn_rotation_ex_attr_use vi_drv_get_chn_spread_attr_use vi_drv_get_chn_spread_enalbe_use vi_drv_get_ext_chn_fisheye_working_attr vi_drv_get_fisheye_working_config vi_drv_get_ldc_operation_attr vi_drv_get_rotation_ex_operation_attr vi_drv_get_rotation_operation_attr vi_drv_get_spread_operation_attr vi_drv_get_working_chn_compress_mode vi_drv_is_gdc_cfg_update vi_drv_set_chn_rotation_ex_attr vi_drv_set_chn_spread_attr vi_drv_set_gdc_cfg_update_flag vi_drv_set_spread_operation_pointer vi_enable_local_dis vi_gdc_bypass_task_call_back vi_check_chn_attr_support_dis vi_de_init_dis_algorithm vi_drv_dis_check_config vi_drv_dis_get_vb vi_drv_dis_pool_de_init vi_drv_dis_pool_init vi_drv_get_dis_pool_id vi_drv_prepare_chn_dsf_pic_info vi_drv_set_di_sen vi_drv_set_dis_dsf_config vi_drv_set_dis_pool_id vi_drv_update_last_buf_ok_flag vi_enable_global_dis vi_get_default_dis_param vi_init_dis_algorithm vi_set_dis_sys_config osal_create_proc_entry osal_remove_proc_entry sprintf_s vi_drv_ext_chn_fisheye_configed vi_drv_get_bas_detection_size vi_drv_get_chn_trim_crop_info vi_drv_get_dev_detection_size vi_drv_get_isp_be_buf_num vi_drv_get_isp_detection_size vi_drv_get_nr_interface_type vi_drv_get_nr_version vi_drv_is_dev_support_bas vi_drv_is_nrxv1_param_support vi_drv_is_nrxv2_param_support vi_drv_proc_mod_param vi_drv_proc_pipe_nrxv1_param vi_drv_proc_pipe_nrxv2_param calc_vpss_split_num cmpi_mmz_malloc_cached g_ast_vi_drv_dev_ctx g_past_pipe_drv_ctx g_reg_otp_base_va get_split_line_buffer_size osal_flush_dcache_area osal_udelay v500_calc_nrxv2_auto_param v500_map_nrx v500_set_default_nrx v500_update_nrx vi_drv_bus_clock_enable vi_drv_bus_reset vi_drv_check_crop_align vi_drv_check_fisheye_config vi_drv_check_wdr_attr vi_drv_dev_clock_enable vi_drv_dev_reset vi_drv_enable_isp_algorithm vi_drv_get_fisheye_config vi_drv_get_isp_ai_attr vi_drv_get_isp_be_reg vi_drv_get_isp_dis_attr vi_drv_get_isp_pub_bayer_format vi_drv_get_isp_pub_rect vi_drv_get_mast_pipe_by_dev vi_drv_get_pipe_ai_nrxv2_param vi_drv_get_pipe_bind_dev_output_size vi_drv_get_pipe_nrxv2_param vi_drv_get_proc_reg vi_drv_get_sensor_bit_width vi_drv_get_yuv_stride_by_bit_width vi_drv_is_mipi_intf_mode vi_drv_is_proc_power_on vi_drv_isp_cfg_reset vi_drv_isp_clock_enable vi_drv_isp_core_reset vi_drv_ppc_clock_enable vi_drv_ppc_reset vi_drv_proc_ldcv2_attr vi_drv_set_be_lut2_stt_width vi_drv_set_data_layout vi_drv_set_fisheye_config vi_drv_set_isp_dis_attr vi_drv_set_online_sel vi_drv_set_port_id_config vi_drv_set_port_select vi_drv_set_wdr_line_a_fifo_enable vi_drv_trans_bit_width vi_drv_trans_dynamic_range2_bit_width_en vi_drv_trans_pixel vi_drv_update_fpn_correction vi_drv_update_isp_sync_param vi_drv_wch_clock_enable vi_hal_calc_data_bit_width_by_port_mask vi_hal_calc_mask vi_hal_calc_offset vi_hal_cap_mem_power_enable vi_hal_cap_reg_exit vi_hal_cap_reg_init vi_hal_cap_set_outstanding vi_hal_clear_any_proc_int vi_hal_clear_wch_int vi_hal_enable_chn vi_hal_enable_pipe_interrupt vi_hal_get_cap_int_status vi_hal_get_cap_irq_num vi_hal_get_dev_detection_size vi_hal_get_fe_wch_int_status vi_hal_get_isp_be_reg vi_hal_get_isp_detection_size vi_hal_get_node_id vi_hal_get_proc_irq_num vi_hal_get_proc_irq_status vi_hal_get_proc_reg vi_hal_get_vicap_int_mask vi_hal_get_viproc_debug12 vi_hal_get_viproc_debug13 vi_hal_is_proc_irq_valid vi_hal_offline_get_hw_cycle_cnt vi_hal_print_reg_status vi_hal_proc_low_power_enable vi_hal_proc_reg_exit vi_hal_proc_reg_init vi_hal_proc_reg_new vi_hal_proc_reg_new_manual vi_hal_proc_set_apb_mux_cfg vi_hal_proc_set_outstanding vi_hal_proc_split_mode vi_hal_set3dnr_param vi_hal_set_afifo_crop vi_hal_set_be0_cfg_load_addr vi_hal_set_be1_cfg_load_addr vi_hal_set_be_enable vi_hal_set_be_lut2_stt_addr vi_hal_set_be_output_pixel vi_hal_set_bepara0_load_addr vi_hal_set_bepara1_load_addr vi_hal_set_bepara2_load_addr vi_hal_set_bepara3_load_addr vi_hal_set_bt656_en vi_hal_set_chn_cmp_attr vi_hal_set_chn_combine_mode vi_hal_set_chn_comp_mode vi_hal_set_chn_correct_en vi_hal_set_chn_crop vi_hal_set_chn_fixcode vi_hal_set_chn_ftc_polar vi_hal_set_chn_input_mode vi_hal_set_chn_pic_config vi_hal_set_chn_scan_mode vi_hal_set_chn_skip_cfg vi_hal_set_chn_sync vi_hal_set_chn_timing_blank vi_hal_set_chn_yuv_input_seq vi_hal_set_cur_dcmp_attr vi_hal_set_cur_pic_config vi_hal_set_data_mask vi_hal_set_data_offset vi_hal_set_dev_auto_timing_en vi_hal_set_dev_timing_hact vi_hal_set_dev_timing_hbb vi_hal_set_dev_timing_hfb vi_hal_set_dev_timing_vact vi_hal_set_dev_timing_vbb vi_hal_set_dev_timing_vfb vi_hal_set_drc_out_para_addr vi_hal_set_drc_para_addr vi_hal_set_dsf_config vi_hal_set_dsf_load_addr vi_hal_set_fe_wch_pic_config vi_hal_set_img_pro_mode vi_hal_set_isp_bypass_mode vi_hal_set_isp_mcds_vcds_en vi_hal_set_isp_mode vi_hal_set_isp_sel vi_hal_set_isp_stt_addr vi_hal_set_ldci_out_para_addr vi_hal_set_ldci_para_addr vi_hal_set_mask vi_hal_set_mipi_yuv_cfg vi_hal_set_mipi_yuv_crop vi_hal_set_mipi_yuv_seq vi_hal_set_next vi_hal_set_node_id vi_hal_set_online_sel vi_hal_set_pipe_online vi_hal_set_port_comp_mode vi_hal_set_port_en vi_hal_set_port_input_mode vi_hal_set_port_select vi_hal_set_port_yuv444_en vi_hal_set_proc_video_enable vi_hal_set_s_fifo_enable vi_hal_set_vicap_ch_crop vi_hal_set_vicap_int_mask vi_hal_set_wch_cmp_attr vi_hal_set_wch_cmp_bayer_mode vi_hal_set_wch_dly_line vi_hal_set_wch_en vi_hal_set_wch_finish_mode vi_hal_set_wch_mask vi_hal_set_wch_reg_newer vi_hal_set_wch_reg_newer_mode vi_hal_set_wch_update vi_hal_set_wch_uv2_c vi_hal_set_wdr_cmp_attr vi_hal_set_wdr_cmp_bayer_mode vi_hal_set_wdr_pic_config vi_hal_start vi_wdr_create_pool vi_wdr_destory_pool vi_wdr_get_vb viproc_split_for_isp viproc_split_for_viproc vpss_split_for_isp g_isp_be_reg g_vi_cap_irq_arg g_vi_cap_irq_num g_vi_cap_reg g_vi_proc_irq_arg g_vi_proc_irq_num g_vi_proc_reg osal_dmb osal_dsb osal_ioremap_nocache osal_iounmap osal_isb vi_hal_enable_wdr_pic vi_hal_get_bit_width_by_pix_fmt vi_hal_get_cap_id_by_dev vi_hal_get_cap_id_by_pipe vi_hal_get_fpn_calib_stats vi_hal_get_fpn_calib_sum vi_hal_get_isp_fcnt vi_hal_get_port_reg vi_hal_get_viproc_timeout_flag vi_hal_set_be_ae_offset vi_hal_set_be_bnr_de_blcvalue vi_hal_set_be_bnr_rlmt_offset vi_hal_set_be_dgain_offset vi_hal_set_be_expander_offset vi_hal_set_be_la_offset vi_hal_set_be_lsc_offset vi_hal_set_be_wb_offset vi_hal_set_drc_denom_exp vi_hal_set_drc_div_denom_log vi_hal_set_drc_prev_luma0 vi_hal_set_drc_prev_luma1 vi_hal_set_drc_prev_luma2 vi_hal_set_drc_prev_luma3 vi_hal_set_drc_prev_luma4 vi_hal_set_drc_prev_luma5 vi_hal_set_drc_prev_luma6 vi_hal_set_drc_prev_luma7 vi_hal_set_drc_shp_cfg vi_hal_set_f0_4dg_offset vi_hal_set_f0_flick_offset vi_hal_set_f0_wdr_offset vi_hal_set_f1_4dg_offset vi_hal_set_f1_flick_offset vi_hal_set_f1_wdr_offset vi_hal_set_flick_exporatio0 vi_hal_set_fpn_calib_start vi_hal_set_fpn_cfg vi_hal_set_fpn_correct_data_source vi_hal_set_fpn_correct_en vi_hal_set_fpn_dark_frame_bit_width vi_hal_set_fpn_data_source vi_hal_set_fpn_en vi_hal_set_fpn_frame_num vi_hal_set_fpn_in_enable vi_hal_set_fpn_in_mem_info vi_hal_set_fpn_in_yc_size vi_hal_set_fpn_out_crop_en vi_hal_set_fpn_out_enable vi_hal_set_fpn_out_mem_info vi_hal_set_fpn_out_pack_width vi_hal_set_fpn_out_yc_size vi_hal_set_fpn_src_corr vi_hal_set_fpn_white_level vi_hal_set_isp4_dgain0 vi_hal_set_isp4_dgain1 vi_hal_set_isp_dgain vi_hal_set_isp_id_sel vi_hal_set_ldci_stat_evratio vi_hal_set_port_id_config vi_hal_set_wb_gain1 vi_hal_set_wb_gain2 vi_hal_set_wch_buffer_wrap_enable vi_hal_set_wch_buffer_wrap_line vi_hal_set_wdr_blc_comp0 vi_hal_set_wdr_expo_value0 vi_hal_set_wdr_expo_value1 vi_hal_set_wdr_exporratio0 vi_hal_set_wdr_fusion_mode vi_hal_set_wdr_input_wrap_enable vi_hal_set_wdr_input_wrap_line vi_hal_set_wdr_line_a_fifo_enable vi_hal_set_wdr_long_thr vi_hal_set_wdr_max_ratio vi_hal_set_wdr_mdt_en vi_hal_set_wdr_out_blc vi_hal_set_wdr_short_thr vi_hal_set_wdr_tunl_ctrl vi_drv_get_dev_size vi_drv_set_wdr_tunl_ctrl vi_drv_check_stitch_sync_be_stt_ready vi_drv_get_be_cfg_for_sync_stitch_grp vi_drv_get_stitch_sync_be_stt_info vi_drv_put_be_cfg_for_sync_stitch_grp osal_div_u64 cmpi_unmap __assert_fail interpulate hiirq_platform_set_irq_reg osal_platform_get_irq_byname vi_mod_exit vi_mod_init libc.so
[func]:%s [line]:%d [info]:pipe %d extchn %d fisheye is enabled which is binded to phychn %d! [func]:%s [line]:%d [info]:LDC cannot use with GYRO at the same time. vi_update_wch_cmp_bayer_format vi_get_pipe_repeat_mode [func]:%s [line]:%d [info]:pipe %d,chn %d create gdc failed vi_comm_submit_one_node MaxHWCostTm %8d%16llu%16llu%16llu%10llu%10llu%12llu%12llu%14llu [func]:%s [line]:%d [info]:the vi_snap_status of pipe %d is %d, can not enable again. trigger vi_video_set_snap_status [func]:%s [line]:%d [info]:user copy frame_info for vi_get_pipe_raw failed! [func]:%s [line]:%d [info]:pipe %d there is no WDR node_space to receive this frm! Height DataRev WDR_2F1 SFC BgColor %8d%8s%8d%8s%8x%8d%8u%8u%8u%8s%8u%16llx -------------------------------VI EXTCHN ATTR1------------------------------------------------------------------------- YOffset FStrength ViewAngle [func]:%s [line]:%d [info]:Sub vb err! addr 0x%llu, pool_id %u, uid %d, ret 0x%x vi_drv_check_pipe_static_attr [func]:%s [line]:%d [info]:picture pix format should be SP420/SP422/YUV400 which is %d! vi_drv_check_chn_ldc_attr [func]:%s [line]:%d [info]:unsupported pipe mode %d ! vi_drv_ext_chn_check_capacity [func]:%s [line]:%d [info]:pipe %d chn %d unsupported vb source %d ! [func]:%s [line]:%d [info]:vi_pipe %d:nrx_param_v2 is NULL ! [func]:%s [line]:%d [info]:VI DIS get_vb failed.w:%d ,h:%d %11s%12s%12s%12s [1][2] vi_drv_get_viproc_debug VI_PIPE_FISHEYE_CFG_SET_CTRL [func]:%s [line]:%d [info]:not support the operation [%s]. vi_drv_check_phy_pipe_attr [func]:%s [line]:%d [info]:pipe_bypass_mode(%d) should be VI_PIPE_BYPASS_NONE or VI_PIPE_BYPASS_BE! [func]:%s [line]:%d [info]:snprintf_s DRC COEF buf fail! [func]:%s [line]:%d [info]:vi_pipe %d:nr_auto_v2->param_num should between [1, %d], but it is %u ! vi_drv_wdr_pool_init [func]:%s [line]:%d [info]:FPN calibrate failed, the pipe is FPN correction enable. [func]:%s [line]:%d [info]:do not calibrate when wdr mode ,please disable wdr! [func]:%s [line]:%d [info]:crop start ratio height should be 0 to 1000 which is %d! vi_get_pipe_nrx_status [func]:%s [line]:%d [info]:chanel resetting vi_poll_resault vi_get_dev_bind_pipe vi_pipe_detach_vb_pool [func]:%s [line]:%d [info]:vi_pipe %d vi_chn %d vb_source %d is not support attach interface [func]:%s [line]:%d [info]:pipe %d chn %d is disabled,so get luma is not supported ! VI_PROC%d [func]:%s [line]:%d [info]:Invalid proc mode:%d vi_put_original_node_to_line_input_pic_queue [func]:%s [line]:%d [info]:Begin bypass job failed! [func]:%s [line]:%d [info]:End bypass job failed! [func]:%s [line]:%d [info]:snap_isp_info is NULL. vi_set_pro_sharpen_param FrameCnt vi_snap_check_trigger_pipe_ready [func]:%s [line]:%d [info]:pipe %d has not been start ! disable [func]:%s [line]:%d [info]:VGS is not exist! [func]:%s [line]:%d [info]:vi pipe %d get frame time out, milli_sec=%d vi_get_chn_frame vi_create_dis_chn -------------------------------VI DEV ATTR1---------------------------------------------------------------------------- BT656 B1/3 VbPoolId WdrExposureInterval TFC STH3 CropEn TrimX %8s%8s%10s%10s%10s%11s%5s%6s%9s%9s%6s%6s%6s%6s Timelag -------------------------------VI PIPE STATUS-------------------------------------------------------------------------- [func]:%s [line]:%d [info]:NULL point %s(%d) MODEL [func]:%s [line]:%d [info]:pipe %d chn %d width should be %d align which is %d! vi_drv_check_chn_low_delay_attr vi_drv_check_line_raw_capacity_for_be [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:%d) pixel_format %d is not same as (vc_num:0) pixel_format %d! vi_drv_get_pipe_nrx_param [func]:%s [line]:%d [info]:illegal bind because 2T1WDR need pipe0&pipe1 or pipe2&pipe3, and pipi_id[0] need be pipe0 or pipe2. [func]:%s [line]:%d [info]:pipe %d chn %d align should between %d and %d, which is %d! vi_drv_check_pipe_support [func]:%s [line]:%d [info]:pipe %d chn%d scale beyond VGS scale cap (%d, %d)->(%d, %d)! [func]:%s [line]:%d [info]:invalid input vi vsync_valid %d of dev %d [func]:%s [line]:%d [info]:Divide By Zero Occured. line_buf can not be zero! vi_check_chn_id_for_ioctl vi_set_chn_ldc_attr vi_set_mod_param vi_proc_init vi_proc_deinit [func]:%s [line]:%d [info]:attr of vi dev %d not configed [func]:%s [line]:%d [info]:pipe id %d get DIS vb fail, vi pipe %d pipe_lock init failed! vi pipe %d dis_job_cnt init failed! vi_update_wdr_cmp_bayer_format vi_get_dev_attr vi_create_pipe [func]:%s [line]:%d [info]:pipe %d unexist! [func]:%s [line]:%d [info]:vi_pipe:%d fpn calibrate can't be set when chn %d is enable. vi_check_chn_attr [func]:%s [line]:%d [info]:pipe %d lost frame because of wrong int order! FrmStartCnt [func]:%s [line]:%d [info]:vi_pipe:%d mast_pipe %d wdr_mode:%d master pipe wdr_mode: %d! [func]:%s [line]:%d [info]:vgs get free task failed! [func]:%s [line]:%d [info]:vgs add osd task failed! [func]:%s [line]:%d [info]:snap attr pro_attr.pro_param.operation_mode:%d is error. vi_snap_get_pro_sharpen_param vi_snap_set_pro_bnr_param [func]:%s [line]:%d [info]:please set user pic first [func]:%s [line]:%d [info]:vi_start_no_int_det init timer failed! vi_start_no_int_det [func]:%s [line]:%d [info]:add bypass task fail with 0x%x! [func]:%s [line]:%d [info]:get free task failed! vi_get_chn_rotation_ex_attr vi_create_gdc_chn [func]:%s [line]:%d [info]:can't get DIS export function, it may be DIS module has not been inserted! vi_check_dis_attr [VI] Version: [Hi3516CV500_MPP_V1.0.0.1 B010 Release], Build Time[Jul 13 2021, 09:44:54] AD3 HReph YVYU YUV400 %12s%12s%12s%12s%12s%8s%20s%12s%10s %12s%12d%12d%12s%12s%8u%20s%12u%10d -------------------------------VI PIPE NRX_V1 PARAM-------------------------------------------------------------------- PicID 90 DistortionRatio HOffset OutX %8s%8s%8s%24s%24s%20s %8d%8d%8s%10u%10u%8u%8u%8u LowBandWidth [func]:%s [line]:%d [info]:pipe %d chn %d mirror should be HI_FALSE when split! [func]:%s [line]:%d [info]:width should be %d align which is %d! [func]:%s [line]:%d [info]:height should be %d align which is %d! [func]:%s [line]:%d [info]:crop start abs_x should be 0 to %d which is %d! [func]:%s [line]:%d [info]:pipe %d illegal param: compress_mode:%d, should be COMPRESS_MODE_NONE COMPRESS_MODE_LINE COMPRESS_MODE_FRAME! [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:%d) width %d is not same as (vc_num:0) width %d! %10s%10s%10s%10s%10s%10s%10s%10s %10d%10d%10d%10d%10d%10d%10d%10d VI_DEV_EXATTR_SET_CTRL VI_CHN_EARLY_INT_GET_CTRL VI_PIPE_INT_DISABLE_CTRL VI_CHN_DIS_ATTR_GET_CTRL [func]:%s [line]:%d [info]:compress_mode should be COMPRESS_MODE_NONE which is %d when picture pix format is YUV! [func]:%s [line]:%d [info]:vi_pipe:%d crop x+width can not bigger than max_w! vi_drv_check_post_crop_align [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.sbn6: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:invalid input yuv seq %d of vi dev %d [func]:%s [line]:%d [info]:invalid input vi vsync %d of dev %d [func]:%s [line]:%d [info]:pipe %d create dump raw picture queue fail! [func]:%s [line]:%d [info]:the pipe %d of binding dev %d is not destroyed. [func]:%s [line]:%d [info]:snap pipe %d must be disable first when destroy! vi_start_pipe vi_set_pipe_vc_number [func]:%s [line]:%d [info]:vi_pipe %d vb_source %d is not support attach interface vi_check_chn_enable [func]:%s [line]:%d [info]:can't get GDC export function, it may be GDC module has not been inserted! [func]:%s [line]:%d [info]:pipe %d vi_chn:%d pfn_gdc_fishey_fifo_calc failed! IntCnt MaxIntCostTm [func]:%s [line]:%d [info]:pipe id %d get vb fail,w:%d,h:%d vi_set_user_pic [func]:%s [line]:%d [info]:pixel_format invalid, only support yvu_sp420/yvu_sp422/yuv_400 vi_update_pic_mode_user_pic [func]:%s [line]:%d [info]:add user_pic online task fail with 0x%x! vi_wdr_offline_sync_wdr_frame vi_set_chn_rotation_ex_attr vi_enable_local_dis [func]:%s [line]:%d [info]:destroy GDC chn %d fail ,0x%x! [func]:%s [line]:%d [info]:pipe:%d chn:%d proccess spread task failed ! [func]:%s [line]:%d [info]:vi_pipe %d vi_chn %d can not enable dis while chn crop is enabled ! [func]:%s [line]:%d [info]:illegal param: moving_subject_level(%d), range is [%d,%d]! Module AD2 VReph B1/2 -------------------------------VI PIPE NRX_V2 PARAM-------------------------------------------------------------------- HDR10 -------------------------------VI CHN ATTR2---------------------------------------------------------------------------- Tail -------------------------------VI CHN LOW DELAY ATTR------------------------------------------------------------------- %8s%8s%8s%10s%8s%8s%8s%8s%8s%8s%8s%8s XYRatio -------------------------------VI DIS PARAM INFO----------------------------------------------------------------------- [func]:%s [line]:%d [info]:vi_pipe :%d lost cfg irq proc_int_status: 0x%x [func]:%s [line]:%d [info]:max_h of pipe %d attribute can't be changed! [func]:%s [line]:%d [info]:vi_pipe:%d crop height should between [0,%d) which is %d! [func]:%s [line]:%d [info]:malloc VI MODEL buffer fail! [func]:%s [line]:%d [info]:the LDC module may be not existed vi_drv_get_chn_out_put_size_from_user_set [func]:%s [line]:%d [info]:pipe %d illegal param: dynamic_range:%d,should be DYNAMIC_RANGE_SDR8! [func]:%s [line]:%d [info]:pipe %d illegal param: video_format:%d,should be VIDEO_FORMAT_LINEAR ! vi_drv_check_wdr_raw_capacity [func]:%s [line]:%d [info]:grp%d chn%d fisheye input image pixel format is PIXEL_FORMAT_YUV_400, output image pixel format is not PIXEL_FORMAT_YUV_400. [func]:%s [line]:%d [info]:VI DIS create_pool failed. VI_CHN_GDC_LDCV2_GET_CTRL [func]:%s [line]:%d [info]:src_frame_rate(%d) wrong,should be [1, %d] [func]:%s [line]:%d [info]:crop hi_size (%d, %d) is smaller than pic minimum size(%d, %d),disable crop! vi_drv_calc_crop [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.sfn2: %d, should between [%d,%d]! can not find vi cap IRQ vi synchronization context init failed! [func]:%s [line]:%d [info]:pipe %d has been created ! vi_check_dev_bind_pipe vi_get_pipe_cmp_param vi_stop_pipe [func]:%s [line]:%d [info]:vi_pipe(%d) vi_chn(%d) compress_mode(%d) not support! vi_check_chn_id [func]:%s [line]:%d [info]:pipe %d is destroying or resetting! NodeIdErrCnt [func]:%s [line]:%d [info]:max_w(%d) of pipe_attr is not equal to width(%d) of input frame. vi_add_phy_chn_task_to_vgs vi_snap_zsl_enqueue_proc PRO vi_get_pipe_dump_attr [func]:%s [line]:%d [info]:pipe %d chn %d is already enabled, only one chn canbe enabled DIS in one pipe ! [func]:%s [line]:%d [info]:the image hi_size of vi_chn %d should be the same as that of vi_pipe %d! vi_enable_dis vi_deinit_dis DropErrFrame LVDS -------------------------------VI DEV TIMING ATTR---------------------------------------------------------------------- RAW10 ChnID %8s%8s%8s%8s%8s%10s%12s%12s%10s%14s%14s%10s %8s%8s%8s%9s%9s INSIDE Motion GyroRange MaxTaskTm [func]:%s [line]:%d [info]:pipe %d chn %d video format should be LINEAR which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d video format can not change, old is %d,new is %d! [func]:%s [line]:%d [info]:pipe %d iso address is invalid, maybe the space of iso is not big enough! VI_PIPE_FISHEYE_CFG_GET_CTRL VI_CHN_GDC_LDCV2_SET_CTRL VI_EXTCHN_ATTR_SET_CTRL [func]:%s [line]:%d [info]:the four points of the region ([%d, %d], [%d, %d], [%d, %d], [%d, %d]) is on vertical or horizental line [func]:%s [line]:%d [info]:vi_pipe(%d) do not support SP420/SP422/YUV400! vi_drv_check_pipe_compress_mode [func]:%s [line]:%d [info]:pipe %d send yuv height %d is not same as max_h %d! [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.sfn3: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:memcpy_s iso param fail! [func]:%s [line]:%d [info]:invalid work mode %d of vi dev %d, must be VI_WORK_MODE_1Multiplex [func]:%s [line]:%d [info]:invalid input vi vsync_valid_neg %d of dev %d node is NULL! [func]:%s [line]:%d [info]:vi_drv_get_wdr_buf_size failed. [func]:%s [line]:%d [info]:fpn calbirate timeout 1600ms!!! hiirq_platform_set_irq_reg for vicap fail! Hi3516CV500 osal_atomic_init failed ! [func]:%s [line]:%d [info]:pipe %d DRV context init fail. [func]:%s [line]:%d [info]:can't use sys,please check sys module! g_vi_comm_lock init failed! vi_get_pipe_raw_source vi_check_ext_chn_id HWCostTm DcmpErrCnt [func]:%s [line]:%d [info]:add osd task fail with 0x%x! [func]:%s [line]:%d [info]:pipe %d chn %d get out blk failed, width: %d, height: %d. [func]:%s [line]:%d [info]:pipe %d has been triggered and has not yet been finished,can not set snap attr! SnapPipe VcNum vi_snap_offline_pipe_de_init [func]:%s [line]:%d [info]:pipe:%d vi_drv_get_be_cfg fail. [func]:%s [line]:%d [info]:Get pipe %d sema fail! [func]:%s [line]:%d [info]:pipe %d chn %d get_dsf_cfg error : 0x%x! [func]:%s [line]:%d [info]:pipe id %d get DIS vb fail %7s%6s%6s%6s%6s%8s%10s%10s%8s%8s%8s%8s%10s%11s%10s BuildIn CH0 MATH 180 XOffset ALL %8d%8d%8s%8u%8u%10u [func]:%s [line]:%d [info]:max_w of pipe %d attribute can't be changed! [func]:%s [line]:%d [info]:height should between %d and %d! [func]:%s [line]:%d [info]:the spread module may be not existed [func]:%s [line]:%d [info]:pipe %d is WDR mode can not send yuv. %8d%12u%10u%10u%10u%10u%10u%10u%10u%10u [func]:%s [line]:%d [info]:only support enable one vi_dev. vi_drv_check_dev_bind_pipe SrcJun VI_DEV_EXATTR_GET_CTRL VI_DEV_FLASH_TRIGGER_CTRL VI_MCF_GRP_GET_CTRL VI_CHN_ROTATION_SET_CTRL [func]:%s [line]:%d [info]:nr_en should be 0 or 1 which is %d! [func]:%s [line]:%d [info]:vi online pipe_mode do not support SP420/SP422/YUV400! vi_drv_get_nriso_range [func]:%s [line]:%d [info]:pipe %d iso address is invalid! vi_drv_check_data_rate [func]:%s [line]:%d [info]:pipe_id %d create %s VB pool failed! bufsize: %d, buf_num: %d unload vi for %s...OK! [func]:%s [line]:%d [info]:mod_id(%d) is invalid [func]:%s [line]:%d [info]:vi_pipe:%d sumbit vpss task fail [func]:%s [line]:%d [info]:pipe %d chn %d add getframe err 0x%x! vi dev %d spinlock init failed! vi_isp_get_pipe_frame_interrupt_attr vi_get_pipe_status vi_enable_pipe_interrupt [func]:%s [line]:%d [info]:vi pipe %d is start, not allowed to set pipe pre crop! [func]:%s [line]:%d [info]:vi_pic_info is NULL! MaxIntCntPerSec PipeID vi_add_user_pic_online_task [func]:%s [line]:%d [info]:pipe id %d get user_pic_dst vb fail [func]:%s [line]:%d [info]: rotate_ex and rotate cannot on at the same time! [func]:%s [line]:%d [info]:FISHEYE task fail! %7s%8s%10s%10s%10s%20s%8s%12s%12s%8s X2 RAW16 %18llu%20llu%10llu%10llu%20llu %8d%8s%8d%8s%8x%8d%8s%8s%8s%8s%8s%16s Aspect YRatio Tilt MovSub FrameRate [func]:%s [line]:%d [info]:vi register to region failed. [func]:%s [line]:%d [info]:not support pipe post crop when wdr mode! vi_drv_pipe_drv_ctx_init [func]:%s [line]:%d [info]:pipe %d chn %d mirror should be HI_FALSE or HI_TRUE which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d video_format is %d, not support! [func]:%s [line]:%d [info]:pipe %d chn %d frame rate can not change, old is [%d,%d],new is [%d,%d]! [func]:%s [line]:%d [info]:pipe %d chn%d dest width(%d) beyond max width! [func]:%s [line]:%d [info]:grp%d chn%d fisheye input image compress is not COMPRESS_MODE_NONE . SrcCaliRatio %10d%10d%10d%10d%10d%10d%10d%10d%10d%10d%10d%10d VI_CHN_VGS_LDCV3_SET_CTRL VI_CHN_CROP_SET_CTRL VI_CHN_DIS_ATTR_SET_CTRL [func]:%s [line]:%d [info]:picture compress mode should be COMPRESS_MODE_NONE COMPRESS_MODE_LINE COMPRESS_MODE_FRAME which is %d! [func]:%s [line]:%d [info]:vi_pipe:%d crop.x should between [0,%d) which is %d! vi_drv_malloc_be_stt_buffer [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.sfn1: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.sfn0: %d, should between [%d,%d]! vi_drv_check_nrxv2_auto_param vi_drv_check_data_reverse [func]:%s [line]:%d [info]:hasn't create vb pool! vi_drv_get_wdr_buf_size vi_fpn_calibrate_timeout [func]:%s [line]:%d [info]:set WDR vb_config failed. [func]:%s [line]:%d [info]:Invalid wake condtion:%d vi pipe %d pipe_sem init failed! [func]:%s [line]:%d [info]:not allowed bind pipe because dev%d has been binded vi_disable_pipe_interrupt vi_get_pipe_wdr_attr vi_enable_chn vi_chn_attach_vb_pool vi_comm_create_one_node [func]:%s [line]:%d [info]:pipe id %d get vb fail CycleCnt vi_comm_cap_send_dump_frame vi_cap_comm_per_dev_init [func]:%s [line]:%d [info]:disable isp snap pipe %d error! [func]:%s [line]:%d [info]:pipe %d has been started, you should not start it in snap pipe. %8d%8s%10d - finished vi_comm_proc_no_int vi_get_chn_depth vi_get_pipe_raw [func]:%s [line]:%d [info]:func: %s, line: %d ERESTARTSYS vi_submit_ext_chn_pic2_gdc %20s%20s%20s ComMsk0 N UYVY -------------------------------VI BIND ATTR---------------------------------------------------------------------------- CompressMode START CoorX NR_X MANUAL %8s%8s%12s RgnNum BgEnable OutRadius LostCnt [func]:%s [line]:%d [info]:Add invalid vb! addr 0x%llu, pool_id %u, uid %d, ret 0x%x vi_drv_get_ext_chn_fisheye_attr [func]:%s [line]:%d [info]:pipe %d chn %d fisheye input image pixel format is SEMIPLANAR_420, output image pixel format is SEMIPLANAR_422. [func]:%s [line]:%d [info]:nr_version should be VI_NR_V2 which is %d! [func]:%s [line]:%d [info]:memcpy_s pipe_ai_nrxv2_param iso fail! -------------------------------VI MODE ------------------------------------------------------------- VI_STITCH_GRP_GET_CTRL VI_CHN_DIS_CONFIG_GET_CTRL [func]:%s [line]:%d [info]:crop height should be 2 align which is %d! [func]:%s [line]:%d [info]:pipe %d vmalloc for nrx_param_v2 failed! online [func]:%s [line]:%d [info]:pixel_format invalid, only support RAW. ASSERT at: >Function : %s >Line No. : %d >Condition: %s arch/hi3516cv500//hal/vi_hal_3dnr.c [func]:%s [line]:%d [info]:MPP vi not init ! vi_check_mod_param [func]:%s [line]:%d [info]:not allowed bind pipe because dev_bind_pipe_attr is invalid. [func]:%s [line]:%d [info]:vi pipe ID(%d) is invalid vi_get_pipe_vc_number vi_set_pipe_nrx_param [func]:%s [line]:%d [info]:dynamic_range:%d is err vi_comm_proc_online_vpss_offline_frame_irq_route vi_comm_master_pipe_is_normal [func]:%s [line]:%d [info]:mast_pipe %d is destroying! vi_submit_some_job_to_vgs vi_disable_snap_pipe bLoadCCM -------------------------------VI SNAP STATUS INFO--------------------------------------------------------------------- vi_snap_check_zsl_attr vi_snap_check_enable [func]:%s [line]:%d [info]:pipe %d has not been snap enabled ! %8s%12d%10d%10d%10d%12d [func]:%s [line]:%d [info]:userpic invalid field:%d, only support VIDEO_FIELD_FRAME. [func]:%s [line]:%d [info]:VGS add user_pic_bg cover task fail! need callback . [func]:%s [line]:%d [info]:Invalid vi_chn, %d. [func]:%s [line]:%d [info]:milli_sec(%d) must be >= -1! [func]:%s [line]:%d [info]:osal_copy_to_user: copy hi_video_frame failed! [func]:%s [line]:%d [info]:can't get gdc param, it may be gdc chn has not been created [func]:%s [line]:%d [info]:pipe %d chn %d get default dis parameter error: 0x%x!! [func]:%s [line]:%d [info]:create DIS chn fail ,0x%x! [func]:%s [line]:%d [info]:pipe %d chn %d dis algorithm failed! [func]:%s [line]:%d [info]:can't get dis export function, it may be dis module has not been inserted! vi_comm_prepare_disvb_and_info vi_destroy_dis_chn [func]:%s [line]:%d [info]:illegal param: vertical_limit(%d), range is [%d,%d]! AD1 %7s%12s%12s%10s%12s RFR SFS2 SFN0 TrimY RIT Scale IPC %8s%8s%8s%8s%8s%8s%8s%8s%10s%14s%14s%10s -------------------------------VI PIPE Statistic----------------------------------------------------------------------- vi_drv_check_chn_static_attr vi_drv_check_chn_spread_attr vi_drv_check_ext_chn_fisheye_attr [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:%d) video_format %d is not same as (vc_num:0) video_format %d! [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:%d) illegal param: field:%d vi_drv_check_ext_fisheye_capacity [func]:%s [line]:%d [info]:grp%d chn%d fisheye input image hi_size width: %d, height: %d is small than %d_x%d. [func]:%s [line]:%d [info]:enable should be HI_TRUE or HI_FALSE which is %d [func]:%s [line]:%d [info]:pipe %d pipe_id[%d] should be %d which is %d in wdr mode! -------------------------------VPSS MODE ----------------------------------------------------------- [1][1] VI_CHN_GDC_SPREAD_SET_CTRL vi_drv_check_pipe_common_attr [func]:%s [line]:%d [info]:isp_bypass should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:crop coordinate (%d, %d) is overranging of pic size(%d, %d),disable crop! [func]:%s [line]:%d [info]:vi_pipe %d:nr_auto_v2->nrx_param_v2 is NULL ! [func]:%s [line]:%d [info]:not support FPN when split. vi create dev failed! [func]:%s [line]:%d [info]:crop start ratio_x should be 0 to 999 which is %d! vi_check_pipe_id vi_handle_ext_chn_pic vi_get_region_luma_timeout [func]:%s [line]:%d [info]:memcpy_s region_num fail! [func]:%s [line]:%d [info]:pipe %d chn %d region:%d(X=%d,Y=%d,height=%d,width=%d)they all should be a multiple of 2! %9d%12llu%12llu%12llu%12llu BusErrCnt CfgLossCnt [func]:%s [line]:%d [info]:vi proc%d should be %d but actual %d [func]:%s [line]:%d [info]:pipe %d no space to receive this frm! [func]:%s [line]:%d [info]:pipe %d is destroying/resetting! vi_check_wdr_capacity [func]:%s [line]:%d [info]:End vgs normal job failed! Interval ProDelayInt [func]:%s [line]:%d [info]:can not enable snap when single pipe. [func]:%s [line]:%d [info]:add task or end job fail with 0x%x! [func]:%s [line]:%d [info]:VGS add user_pic online task fail! need callback . [func]:%s [line]:%d [info]:pipe %d no WDR node_space to receive this frm! vi_check_chn_attr_for_gdc [func]:%s [line]:%d [info]:vi_pipe(%d) vi_chn(%d) compress_mode is not NONE, not support! [func]:%s [line]:%d [info]:dis_algorithm_de_init fail ,0x%x! DevEn ComMsk1 N/A 2Mux DevFrmRate IspBypass RefSrc -------------------------------VI PIPE DUMP ATTR----------------------------------------------------------------------- BufNum %8d%8s%10u%10u%10u%8u%8u%8u MaxSoftTm [func]:%s [line]:%d [info]:pipe_bypass_mode of pipe %d attribute can't be changed! [func]:%s [line]:%d [info]:crop height should between %d and %d which is %d! [func]:%s [line]:%d [info]:pipe %d can not send raw from BE when pipe pixel format is %d ! [func]:%s [line]:%d [info]:invalid VI-VPSS mode mode[0] %d, shoule be [%d, %d] vi_drv_dis_check_config VI_PIPE_SNAP_PRO_BNR_PARAM_SET_CTRL VI_CHN_CROP_GET_CTRL VI_CHN_DIS_PARAM_SET_CTRL [func]:%s [line]:%d [info]:vi_pipe:%d picture width should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:crop width should be 2 align which is %d! vi_drv_get_calc_crop_rect vi_drv_get_region [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.spn6: %d, should between [%d,%d]! parallel [func]:%s [line]:%d [info]:node_num is too large! [func]:%s [line]:%d [info]:pipe %d chn %d pic_node is null! vi_wait_normal_wakeup vi pipe %d wait_dis_fin init failed! vi_set_dev_bind_pipe [func]:%s [line]:%d [info]:pipe %d set VC number failed after pipe started! vi_set_pipe_fpn_attr vi_get_pipe_fpn_attr [func]:%s [line]:%d [info]:pipe %d vb pool id %d is invalid ! vi_set_comm_frame_int_attr vi_get_ext_chn_attr IntCntPerSec [func]:%s [line]:%d [info]:ERR IRQ :proc_int_status:0x%x proc_mode:%d VI_CAP%d [func]:%s [line]:%d [info]:snprintf_s vi_cap_name of cap_id %d fail! [func]:%s [line]:%d [info]:vgs add coverex task failed! vi_add_ext_chn_task_to_vgs vi_get_online_task_out_pic_info Status vi_snap_checck_snap_normal_attr [func]:%s [line]:%d [info]:ZSL snap must be double pipe mode. [func]:%s [line]:%d [info]:pipe %d ZSL busy node is null. vi_snap_get_first_zsl_frame vi_snap_get_remaining_zsl_frame [func]:%s [line]:%d [info]:pipe %d chn %d vi_init_dis_algorithm error : 0x%x! [func]:%s [line]:%d [info]:illegal param: low_freq_motion_freq(%d), range is [%d,%d]! [func]:%s [line]:%d [info]:pipe %d chn %d config not allow change except crop_ratio! YUYV DevWidth BitWidth DEV EARLY [func]:%s [line]:%d [info]:chip_id illegal. [func]:%s [line]:%d [info]:vi_pipe:%d crop y+height can not bigger than dev_height! [func]:%s [line]:%d [info]:crop width should be %d align which is %d! vi_drv_chn_check_online_capacity [func]:%s [line]:%d [info]:pipe %d illegal param: compress_mode:%d, should be COMPRESS_MODE_NONE when pixel is BAYER 8BPP 16BPP! [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:%d) height %d is not same as (vc_num:0) height %d! vi_drv_get_pipe_nrxv2_param vi_drv_check_pipe_frame_interrupt_attr Pipe0Mode %8d%12d%12d%8d VI_CHN_FRAME_GET_CTRL [func]:%s [line]:%d [info]:not support set/get pipe post crop when vi offline. [func]:%s [line]:%d [info]:pipe %d send yuv width %d is not same as max_w %d! [func]:%s [line]:%d [info]:iso reach out of range! [func]:%s [line]:%d [info]:nr_version is not VI_NR_V2. [func]:%s [line]:%d [info]:ISO should between [100, 3276800],but it is %u ! vi_drv_check_work_mode [func]:%s [line]:%d [info]:pipe %d has destoried VB pool! [func]:%s [line]:%d [info]:vi_wdr_create_pool failed. vi_drv_set_fpn_calibrate_attr vi_drv_check_correction_attr [func]:%s [line]:%d [info]:Ioctl cmd 0x%x does not exist! vi_check_mod_id [func]:%s [line]:%d [info]:pipe %d create input picture queue fail! vi_chn_prepare_vb [func]:%s [line]:%d [info]:pipe %d unexisted ! vi_get_pipe_attr [func]:%s [line]:%d [info]:pipe %d unexisted! vi_get_chn_crop [func]:%s [line]:%d [info]:vgs end job fail with 0x%x! [func]:%s [line]:%d [info]:vgs task callback failed! [func]:%s [line]:%d [info]:can not disable snap when single pipe. bDoublePipe %10u%10u%8d%10u%12u%10u vi_proc_no_int_det [func]:%s [line]:%d [info]:usr_pic_mode invalid, usr_pic_mode %d [func]:%s [line]:%d [info]:pipe %d can not send yuv while pipe pipe_bypass_mode is VI_PIPE_BYPASS_BE! [func]:%s [line]:%d [info]:pipe %d can't use sys,please check sys module! vi_send_mult_pipe_raw vi_check_dis_param [func]:%s [line]:%d [info]:pdt_type:%d illegal P 4Mux None %2d PixFmt RAW12 %8s%16s%16s%16s%16s%16s%16s%16s STH0 TFS CSFS SFN1 %14s%10s%10s%10s %7s%10s %8d%8d%8s%8s%8s%8d%8d%8s%10s%14s%14s%10u ISPID [func]:%s [line]:%d [info]:Sub invalid vb! addr 0x%llu, pool_id %u, uid %d, ret 0x%x vi_drv_get_vb [func]:%s [line]:%d [info]:unsupported pipe mode %d [func]:%s [line]:%d [info]:yuv_skip of pipe %d attribute can't be changed! [func]:%s [line]:%d [info]:src chn%d is not phy chn [func]:%s [line]:%d [info]:pipe %d : invalid pixel format %d of phy chn %d should be YUV400, while frame pixel format is %d !! [func]:%s [line]:%d [info]:pipe %d ext_chn %d video format should be LINEAR which is %d! [func]:%s [line]:%d [info]:pipe %d illegal param: compress_mode:%d,should be COMPRESS_MODE_NONE ! [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:%d) compress_mode %d is not same as (vc_num:0) compress_mode %d! vi_drv_put_region [func]:%s [line]:%d [info]:pipe %d chn %d fisheye input image pixel format is not SEMIPLANAR_420 or PIXEL_FORMAT_YUV_400. [func]:%s [line]:%d [info]:vi_pipe %d raw_source %d illegal,only support send raw from BE when linear mode! VI_MCF_GRP_SET_CTRL VI_PIPE_FRAME_INT_SET_CTRL VI_CHN_DIS_PARAM_GET_CTRL VI_PIPE_USER_PIC_CTRL [func]:%s [line]:%d [info]:pipe %d can not support compressed raw data when picture pix format is BAYER 8BPP 16BPP! [func]:%s [line]:%d [info]:picture compress mode should be COMPRESS_MODE_NONE COMPRESS_MODE_LINE when online_wdr mode! %s(%d) DRC COEF [func]:%s [line]:%d [info]:pipe %d chn%d dest width(%d) beyond [%d, %d]! [func]:%s [line]:%d [info]:pipe %d chn%d dest height(%d) beyond [%d, %d]! vi_drv_check_yuv_size_format [func]:%s [line]:%d [info]:invalid input vi hsync %d of dev %d [func]:%s [line]:%d [info]:vi_dev %d data_rev(%d) err, shoule be HI_FALSE when intf_mode is %d [func]:%s [line]:%d [info]:vi_pipe %d destory vb pool failed! WDR [func]:%s [line]:%d [info]:pipe %d please start pipe first!! [func]:%s [line]:%d [info]:invalid VI-VPSS mode. [func]:%s [line]:%d [info]:pipe %d chn %d get busy node from chn pic queue fail ! vi_proc_send_pic2_chn_pic_queue [func]:%s [line]:%d [info]:the GDC module may be not existed vi_get_chn_align [func]:%s [line]:%d [info]:pipe %d chn %d busy_queue is null [func]:%s [line]:%d [info]:vi proc create node queue fail ! [func]:%s [line]:%d [info]:pipe %d has not been started or triggered. TotalIntCostTm vi_prepare_chn_next_frame_vb vi_check_frame_match_pipe_width_height Type %8s%12s%10s%10s%10s%12s [func]:%s [line]:%d [info]:userpic invalid color_gamut:%d, should between [%d, %d). [func]:%s [line]:%d [info]:vgs_bypass task fail! vi_put_wdr_frame_to_queue vi_wdr_mode_send_pipe_raw_from_be [func]:%s [line]:%d [info]:pipe %d raw_info_addr[%d] address is invalid! [func]:%s [line]:%d [info]:please first set chn (%d, %d)'s attr vi_set_chn_spread_attr [func]:%s [line]:%d [info]:vi_pipe:%d vi_chn:%d release VB fail! [func]:%s [line]:%d [info]:GDC task fail! vi_get_dis_config [func]:%s [line]:%d [info]:illegal param: large_motion_stable_coef(%d), range is [%d,%d]! %20d%20u%20s IntfM WkM WDRMode Qudra BE Version SFS4 CoorType %8s%8s%8s%10s%8s%10s%10s%10s%10s ViewMode %8d%8d%12s%8s%8s%8d%10d%8d%12d%12d%12s%8s -------------------------------VI DIS ATTR INFO------------------------------------------------------------------------ BeBufNum [func]:%s [line]:%d [info]:Add vb err! addr 0x%llu, pool_id %u, uid %d, ret 0x%x [func]:%s [line]:%d [info]:vi_pipe:%d crop width should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d dynamic range should be SDR8 which is %d! [func]:%s [line]:%d [info]:dynamic range should be SDR8 which is %d! [func]:%s [line]:%d [info]:depth should be 0 to %d which is %d vi_drv_check_chn_crop [func]:%s [line]:%d [info]:pipe %d illegal param: compress_mode:%d,should be COMPRESS_MODE_NONE COMPRESS_MODE_FRAME COMPRESS_MODE_LINE! [func]:%s [line]:%d [info]:motion_level:%d err ! vi_drv_check_chn_align VI_CHN_VGS_LDCV3_GET_CTRL vi_drv_check_chip_unsupport_map VI_CHN_REGION_LUMA_GET_CTRL VI_EXTCHN_FISHEYE_ATTR_SET_CTRL vi_drv_check_nrxv2_base_param [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X i_ey.iedz: %d, should between [%d,%d]! vi_drv_check_scan_mode [func]:%s [line]:%d [info]:cache_line(%d) illegal, must be divided by dev_height:%d, and >100. vi_drv_check_calibrate_attr vi_ioctl [func]:%s [line]:%d [info]:pipe %d create wdr picture queue fail! [func]:%s [line]:%d [info]:crop start ratio_y should be 0 to 999 which is %d! vi_line_mode_send_pipe_frame vi_get_chn_ldc_drv_attr [func]:%s [line]:%d [info]:please set module parameter before setting dev attr. vi_comm_proc_hw_statistic vi_add_one_osd_task RollbaskMs [func]:%s [line]:%d [info]:pool id invalid:%d [func]:%s [line]:%d [info]:vi pipe %d chn %d get chn frame time out, milli_sec=%d vi_set_pipe_dump_attr [func]:%s [line]:%d [info]:pipe %d chn %d DIS donot support such attributes! vi_init_dis_algorithm -------------------------------MODULE PARAM --------------------------------------------------------------------------- BT1120S MIPI MIPI_YUV422 YUV X1 %8d%8d%20s Tile AUTO XDR 0 GyroBitWidth vi_drv_check_chn_rotate_ex_attr vi_drv_set_dis_dsf_config %10s%10s%10s%10s%10s%10s%10s%10s%10s%10s%10s%10s VI_PIPE_ENABLE_USER_PIC_CTRL vi_drv_check_post_crop_rect vi_drv_check_pipe_nrxiso_param vi_drv_check_intf_mode [func]:%s [line]:%d [info]:invalid input vi hsync_neg %d of dev %d vi_drv_check_dev_size [func]:%s [line]:%d [info]:dev:%d height should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:wdr_mode(%d) must be in [%d, %d] viproc_split_for_viproc [func]:%s [line]:%d [info]:invalid frame_num %d, must be in [%d, %d]. [func]:%s [line]:%d [info]:the frame size(%d, %d) must be 4 aligned. [func]:%s [line]:%d [info]:pipe %d malloc MKP context fail! vi_update_vi_vpss_mode vi pipe %d wait_get_bnr_raw_frame init failed! [func]:%s [line]:%d [info]:not allowed get bind pipe info because dev%d has not been binded [func]:%s [line]:%d [info]:vi vir pipe ID(%d) is invalid vi_get_chn_rotation_attr [func]:%s [line]:%d [info]:align[%u] is illegal! [func]:%s [line]:%d [info]:pipe%d extchn%d's src chn is not enabled [func]:%s [line]:%d [info]:vi_pipe(%d) vi_chn(%d) video_format is %d, not support! [func]:%s [line]:%d [info]:pipe %d can't get free node! vi_comm_cap_offline_frame_irq_route vi_set_pro_bnr_param FrmDepth vi_snap_set_pro_sharpen_param vi_user_pic_vgs_bypass_task_call_back [func]:%s [line]:%d [info]:pipe %d can not send yuv while pipe frame source is not VI_PIPE_FRAME_SOURCE_USER_BE! [func]:%s [line]:%d [info]:pipe %d vmalloc failed! [func]:%s [line]:%d [info]:gdc motion alg de_init fail ,0x%x! [func]:%s [line]:%d [info]:can't get GDC export function, it may be GDC module has not been inserted [func]:%s [line]:%d [info]:pipe %d chn %d gdc function proc failed ! [func]:%s [line]:%d [info]:vi_pipe(%d) is bypass_be mode, not support dis!! [func]:%s [line]:%d [info]:scale:%d) range[0,1] VbSource User BT601 BasW NONE WDR_2L1 %8d%12s%8s%10s%10u%10u%10s%10u%8s%10s%14s SP444 -------------------------------VI PIPE NR ATTR------------------------------------------------------------------------- SDS2 TrimHgt %8s%8s%8s%8s%8s%8s%10s%10s%10s%20s OutH DisChn bStillCrop %8d%12llu%12u%12u%12llu%12llu%12llu%12llu%15u%10d -------------------------------VI DEV DETECT INFO---------------------------------------------------------------------- [func]:%s [line]:%d [info]:pipe %d chn %d dynamic range can not change, old is %d,new is %d! vi_drv_get_ext_chn_fisheye_drv_attr vi_drv_chn_check_offline_capacity vi_drv_get_frm_vb_blk [func]:%s [line]:%d [info]:pipe %d VI_ONLINE mode don't support send raw. [func]:%s [line]:%d [info]:pipe %d nrx_param_v2 address is invalid, maybe the space of nrx_param_v2 is not big enough! [func]:%s [line]:%d [info]:vi bind pipe ID(%d) is not phy pipe, need [0,%d). [func]:%s [line]:%d [info]:pipe %d line_cnt must be not less than %d. [func]:%s [line]:%d [info]:not support INTERRUPT %d, when pipe is online-wdr_mode. [func]:%s [line]:%d [info]:==> viproc_debug12=0x%x, viproc_debug13=0x%x. [func]:%s [line]:%d [info]:discard_pro_pic should be 0 or 1 which is %d! [func]:%s [line]:%d [info]:pipe %d max_w should be %d align which is %d! vi_drv_check_pipe_pix_fmt vi_drv_check_video_frame [func]:%s [line]:%d [info]:invalid fpn strength, over 1023! vi [func]:%s [line]:%d [info]:dev context has recreate vi pipe %d wait_user_get_region_luma init failed! vi pipe %d chn %d wait_user_get_chn_frame init failed! [func]:%s [line]:%d [info]:pipe %d all chn are not setted,get HDR attr fail! vi_set_chn_attr [func]:%s [line]:%d [info]:pipe %d,chn %d create chn frame queue failed [func]:%s [line]:%d [info]:please first set pipe %d chn %d attr [func]:%s [line]:%d [info]:vi get region luma copy_from_user fail!!! vi_comm_cap_prepare_frame vi_cap_comm_dev_init FirstIntPts CurIntCostTm [func]:%s [line]:%d [info]:start wait list error. vi_submit_bypass_job_to_vgs %10d%10d%8s%10s%12s%10s vi_check_user_pic [func]:%s [line]:%d [info]:usrpic bgcolor(0x%x) invalid, must be in[0x0,0xffffff] [func]:%s [line]:%d [info]:add user_pic cover task fail with 0x%x! [func]:%s [line]:%d [info]:vi_dev: %d is not enable, set dev_timing failed! vi_line_mode_send_pipe_raw_from_be [func]:%s [line]:%d [info]:pipe %d chn %d get FISHEYE out blk failed, width: %d, height: %d. vi_mkp_put_vb [func]:%s [line]:%d [info]:pipe %d chn %d DIS config error! [func]:%s [line]:%d [info]:pipe %d chn %d vi_drv_dis_pool_init failed : 0x%x! vi_destroy_dis_pool [func]:%s [line]:%d [info]:mode:%d illegal DetectErrFrame CacheLine BypassMode YuvSkip DstFRate IntType ONCE UpperLine OptMode -------------------------------VI PIPE USER PIC ATTR------------------------------------------------------------------- VideoFmt DynamicRange %7u%10d %8d%8d%8s%8s%8d%8d%10d%10d%10d%20d -------------------------------VI EXTCHN FISHEYE ATTR------------------------------------------------------------------ VerZoom FrmRate Low %8s%8s%8s%10s%10s%12s%10s%12s%12s%12s%12s%12s%12s -------------------------------VI CHN STATUS--------------------------------------------------------------------------- ValidWidth [func]:%s [line]:%d [info]:vi_pipe:%d crop height should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d hi_size can't be bigger than %d. vi_drv_check_chn_static_attr_for_gdc [func]:%s [line]:%d [info]:low_delay_attr->line_cnt(%d) should be [32,16384] ! [func]:%s [line]:%d [info]:pipe %d invalid VB [func]:%s [line]:%d [info]:pipe %d illegal param: color_gamut:%d should between [%d,%d] [func]:%s [line]:%d [info]:pipe %d wrong LINE raw pixel format %d ! [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:0) width %d is not same as max_w %d! MaxDu [0][3] [1][3] DstCaliRatio VI_DEV_FLASH_GET_CTRL VI_CHN_ALIGN_SET_CTRL VI_PIPE_DISABLE_USER_PIC_CTRL [func]:%s [line]:%d [info]:pipe %d chn%d src height(%d) beyond [%d, %d]! [func]:%s [line]:%d [info]:pipe %d unexisted! vi pipe %d wait_stop_working init failed! vi_check_dev_id [func]:%s [line]:%d [info]:not allowed get bind pipe because dev%d not enable vi_set_ext_chn_attr vi_check_region_luma_attr vi_proc_comm_dev_init IntTmPerSec vi_add_one_coverex_task [func]:%s [line]:%d [info]:memcpy_s err. vi_snap_check_pipe_attr [func]:%s [line]:%d [info]:invalid param zsl: %d, must be HI_TRUE or HI_FALSE vi_snap_node_put_busy vi_comm_get_pipe_int_cnt [func]:%s [line]:%d [info]:pipe %d illegal pipe_num: %d, should >1! [func]:%s [line]:%d [info]:pipe %d lost this frm because get be cfg failed! vi_submit_some_job2_gdc [func]:%s [line]:%d [info]:pipe %d chn %d is not enabled! vi_set_dis_config [func]:%s [line]:%d [info]:illegal param: low_freq_motion_preserve(%d), range is [%d,%d]! Common I MIPI_YUV420_NORMAL AD0 BypassNone SP422 ProcCostTime STH1 PhyAddr Source %8d%8d%8s%9d%9s ABS %8d%8d%12s %8d%8d%8s%10s%8d%10d%10d%10d%10d Wall RgnIndex InRadius %8d%8d%10u%10s%10u%11u%5u%6u%9u%9u%6d%6d%6u%6u DRONE %8d%8d%8d%10s%10s%12d%10d%12d%12d%12s%12d%12d%12d %8s%8s%8s%10s%10s%8s%8s%8s %8d%12u%12u%12u vi_drv_proc_is_lost_cfg_int vi_drv_check_pipe_attr [func]:%s [line]:%d [info]:bit_width of pipe %d attribute can't be changed! [func]:%s [line]:%d [info]:pipe %d chn %d flip can not change, old is %d,new is %d! [func]:%s [line]:%d [info]:vi_pipe %d chn%d only support SDR8. vi_drv_set_pipe_raw_source [func]:%s [line]:%d [info]:pipe %d send raw should from BE which is %d in wdr mode! Pipe3Mode VI_CHN_ROTATION_EX_SET_CTRL VI_CHN_GDC_LDC_GET_CTRL vi_drv_check_mode_unsupport_map vi_drv_check_pipe_wh vi_drv_ext_chn_check_reso_capacity vi_drv_check_data_seq v500_map_nrx vi_check_ldc_other_alg_status vi dev %d sema init failed! vi_check_phy_pipe_id vi_set_pipe_post_crop vi_get_pipe_hdr_attr [func]:%s [line]:%d [info]:vi chn ID(%d) is invalid phy-chn, phy-chn's range is [%d, %d]. vi_get_chn_status [func]:%s [line]:%d [info]:vi_pipe %d vi_chn %d can't set COMPRESS_MODE_SEG because chn already enable rotate!! vi_get_ext_chn_fisheye_drv_attr [func]:%s [line]:%d [info]:get mmz name fail! [func]:%s [line]:%d [info]:pipe %d chn %d luma_data 0x%llx err!,access failed!! ProcIdx -------------------------------VI PROC OFFLINE IRQ STATISTIC---------------------------------------------------------- vi_add_online_task [func]:%s [line]:%d [info]:pipe(%d) snap attr is not configured vi_snap_get_pro_bnr_param vi_send_pipe_yuv vi_wdr_offline_wdr_get_be_cfg vi_de_init_local_dis_algorithm vi_get_use_vb_for_gdc_output [func]:%s [line]:%d [info]:pipe %d chn %d vi_enable_dis failed ,ret :0x%x ! vi_get_dis_param [func]:%s [line]:%d [info]:pipe %d,chn %d create dis chn failed [func]:%s [line]:%d [info]:DIS only support VIDEO_FORMAT_LINEAR,donot support %d video_format ! [func]:%s [line]:%d [info]:illegal param: still_crop(%d), should HI_TRUE or HI_FALSE! DataRate WDR_3L1 %8s%12s%8s%10s%10s%10s%10s%10s%8s%10s%14s Seg %18s%20s%10s%10s%20s LowerLine -------------------------------VI PIPE PRE CROP ATTR----------------------------------------------------------------------- %8d%16u%16s%16s%16s%16s%16s%16s VER_1 nRef SFN3 Align Rotation -------------------------------VI DIS CONFIG INFO1--------------------------------------------------------------------- DV GdcBypass LowFreqMotionFreq %8d%8d%8d%24u%24u%20u vi_drv_check_pipe_post_crop_attr [func]:%s [line]:%d [info]:pipe %d chn %d video_format is %d illegal! [func]:%s [line]:%d [info]:pipe %d chn %d dynamic range can not change, old dynamic is %d, new dynamic is %d! vi_drv_check_crop_align [func]:%s [line]:%d [info]:crop Y should be 2 align which is %d! [func]:%s [line]:%d [info]:vi_rotation_attr->enable should be 0/1 ! [func]:%s [line]:%d [info]:pipe %d chn %d : not allowed to get when not set! [func]:%s [line]:%d [info]:pipe %d : invalid pixel format %d of phy chn %d should be SP422/SP420/YUV400, while frame pixel format is %d !! [func]:%s [line]:%d [info]:pipe %d illegal param: compress_mode:%d, should be COMPRESS_MODE_NONE when pixel is PIXEL_FORMAT_RGB_BAYER_16BPP! [func]:%s [line]:%d [info]:sys_get_vb_cfg is NULL! vi_drv_cap_is_wrong_int [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.srt1: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.j_mode: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.de_idx: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:memcpy_s nrx_param_v2 param fail! [func]:%s [line]:%d [info]:invalid intf mode %d of vi dev %d vi proc %d VIPROC_PNEXT_LOW:%#x next_phy_addr:%#llx vi_wdr_get_vb [func]:%s [line]:%d [info]:not support WDR_MODE_QUDRA. vi_drv_get_be_cfg vi_start_one_task [func]:%s [line]:%d [info]:pipe %d MKP context init fail. g_user_pic_lock init failed! vi_pipe_attach_vb_pool [func]:%s [line]:%d [info]:pipe %d chn %d region_num %d err!,should be [1,%d] [func]:%s [line]:%d [info]:pipe %d chn %d region:%d(X=%d,Y=%d,height=%d,width=%d) is out of limits(0,0,%d,%d)! vi_comm_proc_irq_route vi_submit_ext_chn_pic_to_vgs vi_get_coverex_task_opt_info [func]:%s [line]:%d [info]:vipipe(%d) can not set snap attr in WDR mode. [func]:%s [line]:%d [info]:snap attr pro_param.manual_param.man_sysgain[%d]:%d is error. vi_snap_set_pipe_attr [func]:%s [line]:%d [info]:pipe %d no space to receive this frm! [func]:%s [line]:%d [info]:gdc_bypass task fail! vi_set_dis_param VUVU -------------------------------VI PIPE ATTR2--------------------------------------------------------------------------- -------------------------------VI PIPE POST CROP ATTR----------------------------------------------------------------------- SFS1 Mirror Effect %8s%8s%8s%9s%8s%10s%9s%5s%9s%9s%7s%12s VOffset Strength CurTaskTm -------------------------------VI BAS DETECT INFO---------------------------------------------------------------------- vi create proc failed! vi_drv_register_rgn_capacity [func]:%s [line]:%d [info]:get MMZ name fail! [func]:%s [line]:%d [info]:pipe %d chn %d compress_mode should be COMPRESS_MODE_NONE or COMPRESS_MODE_SEG, which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d get mmz name fail! vi_drv_check_vi_vpss_mode [2][0] VI_PIPE_ISP_DIS_GET_CTRL VI_CHN_GDC_LDC_DRV_ATTR_GET_CTRL VI_EXTCHN_FISHEYE_ATTR_GET_CTRL [func]:%s [line]:%d [info]:yuv_skip should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:vi_pipe %d:NRX ISO param copy from user failed, maybe the space of nrx_param_v2 is not big enough! [func]:%s [line]:%d [info]:value of ISO should be arranged from small to large ! [func]:%s [line]:%d [info]:vi_pipe:%d, mode:%d, invalid pipe mode, must be VI_ONLINE_VPSS_OFFLINE. [func]:%s [line]:%d [info]:vi_pipe:%d invalid fpn_type %d, must be ISP_FPN_TYPE_FRAME. [func]:%s [line]:%d [info]:VI pic pool_id:%d, phy_addr0:0x%llx, ret:0x%x. vi_enable_dev vi_set_pipe_repeat_mode -------------------------------VI HW STATISTIC------------------------------------------------------------------------- [func]:%s [line]:%d [info]:pipe %d use is invaild vi_comm_cap_offline_irq_route [func]:%s [line]:%d [info]:===> offline split need no compress mode, return. vi_get_snap_pipe_attr -------------------------------VI SNAP ATTR INFO----------------------------------------------------------------------- [func]:%s [line]:%d [info]:snap attr load_ccm:%d is error. [func]:%s [line]:%d [info]:snap attr normal_attr.repeat_send_times:%d is error. [func]:%s [line]:%d [info]:pipe_mode:%d get error. [func]:%s [line]:%d [info]:userpic invalid, poolid:%d, phyaddr[0]:0x%lx vi_update_bgc_mode_user_pic [func]:%s [line]:%d [info]:pipe %d add VI failure! [func]:%s [line]:%d [info]:vi_pipe(%d) vi_chn(%d) pixel_format is %d, not support! vi_get_chn_spread_attr [func]:%s [line]:%d [info]:gdc motion alg init failed!!!,0x%x! [func]:%s [line]:%d [info]:pipe %d chn %d vi_drv_dis_pool_de_init failed : 0x%x! [func]:%s [line]:%d [info]:illegal param: rolling_shutter_coef(%d), range is [%d,%d]! [func]:%s [line]:%d [info]:illegal param: gdc_bypass(%d), should HI_TRUE or HI_FALSE! BindPipe Width MIPI_YUV420_LEGACY DataType %7d%6d%6d%6d%6d%8s%10s%10s%8u%8u%8s%8s%10s%11d%10s S1/2 PipeNum SharpenEn CoorY PIC BGC ViewType -------------------------------VI EXTCHN FISHEYE REGION ATTR----------------------------------------------------------- PdtType LargeMotionStableCoef -------------------------------VI ISP DETECT INFO---------------------------------------------------------------------- [func]:%s [line]:%d [info]:sys is not ready! [func]:%s [line]:%d [info]:pipe %d chn %d, width should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d picture pix format should be SP420/SP422/YUV400 which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d hi_size can not change, old is [%d,%d],new is [%d,%d]! [func]:%s [line]:%d [info]:width should between %d and %d! [func]:%s [line]:%d [info]:check gdc corrention attr failed [func]:%s [line]:%d [info]:low_delay_attr->enable(%d) should be 0/1 ! [func]:%s [line]:%d [info]:pipe %d send LINE raw height %d is not same as pipe's max_h %d! [func]:%s [line]:%d [info]:put vi_chn:%d region (type :%d) fail. [func]:%s [line]:%d [info]:vi_pipe %d:NRX param copy to user failed, maybe the space of nrx_param_v2 is not big enough! [func]:%s [line]:%d [info]:vi dev(%d) bind pipe num %d invalid, need 1, when linear mode. Pipe2Mode DstJun[0] vi_drv_check_nrxv2_param vi_drv_check_input_data_type [func]:%s [line]:%d [info]:vi_dev %d data_rev(%d) err, shoule be HI_TRUE or HI_FALSE [func]:%s [line]:%d [info]:invalid dev hi_size size(%d, %d) must be 2 align. [func]:%s [line]:%d [info]:invalid, poolid:%d, phyaddr[0]:0x%lx. [func]:%s [line]:%d [info]:invalid enable %d, which should be HI_TRUE or HI_FALSE. vi register dev failed vi_mkp_create_input_queue [func]:%s [line]:%d [info]:pipe %d create send raw picture queue fail! [func]:%s [line]:%d [info]:please first set chn (%d, %d)'s attr [func]:%s [line]:%d [info]:can't set attr of vi dev(%d), because it has been enabled [func]:%s [line]:%d [info]:not allowed bind pipe because dev%d not enable vi_set_vpss_frame_interrupt_attr vi_get_pipe_pre_crop vi_set_chn_rotation_attr [func]:%s [line]:%d [info]:vi_pipe(%d) vi_chn(%d): calculate hi_rotation configure fail with return 0x%x! [func]:%s [line]:%d [info]:pipe %d chn %d vb pool id %d is invalid ! [func]:%s [line]:%d [info]:vi_pipe %d vi_chn %d can't change chn attr because chn already enable dis!! vi_calc_extchn_fisheye_fifo vi_set_chn_low_dealy_attr %s(%d) RGN LUMA [func]:%s [line]:%d [info]:pipe %d chn %d milli_sec %d err! vi_comm_is_pipe_start MaxIntTmPerSec [func]:%s [line]:%d [info]:vi %s register IRQ fail ! vi_comm_cap_all_mode_irq_route vi_get_pro_bnr_param [func]:%s [line]:%d [info]:video pipe %d unexisted ! vi_snap_discard_pro_frame NORMAL [func]:%s [line]:%d [info]:userpic invalid video_format:%d, only support VIDEO_FORMAT_LINEAR. [func]:%s [line]:%d [info]:userpic invalid dynamic_range:%d, only support DYNAMIC_RANGE_SDR8. [func]:%s [line]:%d [info]:vi chn %d is disabled, not allowed to get chn frame! DevID DC BasH DevTimingEn SBS0 Depth OutW LMF TCoef CropRatio VerLimit vi_drv_get_chn_max_height [func]:%s [line]:%d [info]:vi_pipe:%d crop width should between [0,%d) which is %d! [func]:%s [line]:%d [info]:snprintf_s VI MODEL buffer fail! [func]:%s [line]:%d [info]:pipe %d chn %d height should be %d align which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d depth should be 0 to %d which is %d [func]:%s [line]:%d [info]:your source is %d, only supported raw source from BE. [func]:%s [line]:%d [info]:grp%d chn%d fisheye input image hi_size width: %d, height: %d is big than %d_x%d. vi_drv_set_port_select vi_drv_check_send_raw_in_wdr_mode VI_PIPE_ISP_DIS_SET_CTRL VI_PIPE_YUV_SEND_CTRL VI_PIPE_REPEAT_MODE_GET_CTRL VI_CHN_ROTATION_EX_GET_CTRL VI_CHN_GDC_SPREAD_GET_CTRL VI_CHN_GDC_LOW_DELAY_GET_CTRL vi_drv_check_pipe_bit_width [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.srt0: %d, should between [%d,%d]! vi_drv_get_wdrvb [func]:%s [line]:%d [info]:FPN calibrate failed, vi proc int timeout. [func]:%s [line]:%d [info]:field(%d) invalid, only support FRAME. [func]:%s [line]:%d [info]:invalid offset0 0x%x, offset1 0x%x, must be in [0, 0xFFF]. vi_pipe_mkp_ctx_init [func]:%s [line]:%d [info]:pipe %d user pic queue is full!!!!milli_sec %d [func]:%s [line]:%d [info]:please set module parameter before create pipe. vi_get_pipe_bind_dev_size [func]:%s [line]:%d [info]:pipe %d block should between %d and %d which is %d ! [func]:%s [line]:%d [info]:get chn luma failure vi pipe %d chn %d get_chn_frame_sem init failed! g_vi_module_lock init failed! [func]:%s [line]:%d [info]:not allowed enable dev because dev%d not configed [func]:%s [line]:%d [info]:vi pipe %d is not VI_ONLINE_VPSS_ONLINE, not allowed to be called! vi_set_pipe_pre_crop [func]:%s [line]:%d [info]:pipe %d,chn %d create dis failed [func]:%s [line]:%d [info]:pipe %d chn %d, video_format is tile_16x8, not support VGS! %8s%16s%16s%16s%10s%10s%12s%12s%14s %8s%16s%16s%14s%14s%16s%14s%16s [func]:%s [line]:%d [info]:mast_pipe %d unexisted! [func]:%s [line]:%d [info]:max_h(%d) of pipe_attr is not equal to height(%d) of input frame. vi_snap_get_isp_config [func]:%s [line]:%d [info]:pipe %d create snap ZSL raw picture queue fail! [func]:%s [line]:%d [info]:the userpic size(%d, %d) must be even value [func]:%s [line]:%d [info]:VGS job start fail! vi_set_dev_timing_attr [func]:%s [line]:%d [info]:pipe %d can not support send frame when source is VI_PIPE_FRAME_SOURCE_DEV! [func]:%s [line]:%d [info]:this pixel_format(%d) DIS is not support! [func]:%s [line]:%d [info]:illegal param: horizontal_limit(%d), range is [%d,%d]! [func]:%s [line]:%d [info]:illegal param: strength(%d), range is [0,%d]! BT1120I WDR_3F1 ISO SBS1 SDS0 PoolID Flip TILE_16x8 SDR10 HLG MntMode 6_DOF_GME HorLimit vi_drv_check_ext_chn_attr [func]:%s [line]:%d [info]:calc crop failed! [func]:%s [line]:%d [info]:pipe %d chn%d dest height(%d) beyond max height! vi_drv_check_chip_id [func]:%s [line]:%d [info]:vi dev(%d) bind pipe num %d invalid, need [1,%d]. [func]:%s [line]:%d [info]:illegal because pipe (%d) has been binded [func]:%s [line]:%d [info]:pipe %d vi_dev %d:only dev 0 support read raw from src! vi_drv_dis_pool_init [func]:%s [line]:%d [info]:pipe %d interrupt_attr is invalid! DstJun[1] VI_STITCH_GRP_SET_CTRL [func]:%s [line]:%d [info]:pipe %d do not bind valid dev %d! [func]:%s [line]:%d [info]:vi_pipe:%d crop y+height can not bigger than max_h! [func]:%s [line]:%d [info]:vi_pipe %d:nr_auto_v2->iso is NULL ! [func]:%s [line]:%d [info]:vi_pipe %d:NRX param copy from user failed, maybe the space of nrx_param_v2 is not big enough! vi_wdr_create_pool [func]:%s [line]:%d [info]:pipe %d illegal param: dynamic_range:%d should be DYNAMIC_RANGE_SDR8. tab_vi == 1 vi_do_ioctl [func]:%s [line]:%d [info]:NULL point [func]:%s [line]:%d [info]:null pointer! [func]:%s [line]:%d [info]:vb_source %d must be %d or %d vi pipe %d wait_use_get_raw_frame init failed! vi_set_dev_attr vi_gdc_calc_chn_rotation_cfg vi_get_chn_out_put_size [func]:%s [line]:%d [info]:pipe %d lost this frm! vi_add_one_region_luma_task [func]:%s [line]:%d [info]:add online task failed! vi_snap_set_isp_pro_attr [func]:%s [line]:%d [info]:get isp %d pro ctrl error %x. [func]:%s [line]:%d [info]:the width must be in [%d,%d], the height must be in [%d, %d] vi_user_pic_add_bypass_task2_vgs [func]:%s [line]:%d [info]:pipe %d chn %d can't change spread attr because some extchn binded to this phychn enable fisheye! [func]:%s [line]:%d [info]:GDC lowdelay task fail! vi_enable_global_dis vi_submit_frame2_dis [func]:%s [line]:%d [info]:destroy DIS chn %d fail ,0x%x! [func]:%s [line]:%d [info]:frame_rate:%d range(%d,%d] S1/3 WDR_4F1 RAW14 -------------------------------VI INTERRUPT ONEBUF INFO---------------------------------------------------------------- DumpType SrcChn %8d%8d%8s%9s%8u%10s%#9x%5s%9d%9d%7u%12d GYRO [func]:%s [line]:%d [info]:pipe %d chn %d flip should be HI_FALSE which is %d while pixel_format is %d! [func]:%s [line]:%d [info]:pipe %d chn %d compress_mode should be COMPRESS_MODE_NONE which is %d while pixel_format is %d! vi_drv_check_chn_static_attr_for_fisheye [func]:%s [line]:%d [info]:source only support VI_EXT_CHN_SOURCE_TAIL or VI_EXT_CHN_SOURCE_HEAD. [func]:%s [line]:%d [info]:pipe %d chn%d do not support scale!! [func]:%s [line]:%d [info]:pipe %d : invalid pixel format %d of phy chn %d should be SP420/YUV400, while frame pixel format is %d !! vi_drv_check_yuv_capacity vi_drv_check_pipe_dump_attr %8s%12s%12s%8s [0][1] VI_PIPE_BNR_RAW_GET_CTRL VI_CHN_STATUS_GET_CTRL vi_drv_get_pipe_max_height vi_drv_malloc_drc_buffer [func]:%s [line]:%d [info]:pipe %d send yuv pixel_format %d is not same as pix_fmt %d! [func]:%s [line]:%d [info]:vi_pipe %d: opt_mode should be OPERATION_MODE_AUTO or OPERATION_MODE_MANUAL which is %d! vi_drv_check_syn_cfg [func]:%s [line]:%d [info]:isp_drv_get_be_sync_para failed! viproc_split_for_isp [func]:%s [line]:%d [info]:invalid compress_mode(%d) must be COMPRESS_MODE_NONE. vi_check_pipe_ready [func]:%s [line]:%d [info]:when spread and l_dc on,ldc ratio(%d) cannot smaller than 0. vi pipe %d wait_user_send_frame init failed! vi_get_chn_attr [func]:%s [line]:%d [info]:please first set pipe %d chn %d attr vi_comm_send_yuv_frame_to_chn -------------------------------VI PROC ONLINE IRQ STATISTIC----------------------------------------------------------- %8s%16s%16s%10s%12s%10s%14s%12s%20s FrmErrCnt vi_comm_cap_online_irq_route [func]:%s [line]:%d [info]:add extchn task fail with 0x%x! [func]:%s [line]:%d [info]:add online task fail with 0x%x! rptTimes [func]:%s [line]:%d [info]:snap attr normal_attr.frame_depth:%d is error, must be in (%d, %d]. [func]:%s [line]:%d [info]:the number of dev(%d) bind pipe(%d) is %d, which is error in snap mode. [func]:%s [line]:%d [info]:VI pipe:%d, ISP is not init! vi_disable_user_pic [func]:%s [line]:%d [info]:begin bypass job fail with 0x%x! [func]:%s [line]:%d [info]:user sub err! 0x%x [func]:%s [line]:%d [info]:crop_ratio:%d range[%d,%d] Y BypassFe SP420 EARLY_END_ONE_BUF VER_2 %8s%12s%10s%10s%10s%10s%10s%10s%10s%10s %8d%10s%10u%10u OriScale RecvPic vi_drv_put_vb [func]:%s [line]:%d [info]:pipe %d chn %d flip should be HI_FALSE or HI_TRUE which is %d! [func]:%s [line]:%d [info]:pipe %d chn %d compress mode should be NONE! [func]:%s [line]:%d [info]:check fisheye corrention attr failed [func]:%s [line]:%d [info]:pipe %d can not send raw from BE when pipe isp_bypass is %d ! vi_drv_dis_get_vb %14s VI_CHN_GDC_LOW_DELAY_SET_CTRL VI_EXTCHN_FISHEYE_DRV_ATTR_GET_CTRL [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X interface param sfr6[%d]: %d, should between [%d,%d]! vi_drv_set_dev_timing_attr [func]:%s [line]:%d [info]:dev %d not support intf mode %d. [func]:%s [line]:%d [info]:invalid threshold %d, must be in [1, 0xfff]. [func]:%s [line]:%d [info]:VI WDR create_buffer failed. vi_pipe_ctx_init vi_wait_condition_call_back [func]:%s [line]:%d [info]:crop_en should be 0 or 1 which is %d! [func]:%s [line]:%d [info]:crop coordinate should be VI_CROP_RATIO_COOR or VI_CROP_ABS_COOR! [func]:%s [line]:%d [info]:crop start ratio width should be 0 to 1000 which is %d! [func]:%s [line]:%d [info]:pipe %d user pic queue is full!!!! [func]:%s [line]:%d [info]:pipe %d do not bind dev! [func]:%s [line]:%d [info]:invalid VC number, which should be [0, %d). vi_get_pipe_post_crop [func]:%s [line]:%d [info]:pipe %d chn %d can't change chn hi_rotation because some extchn binded to this phychn enable fisheye! [func]:%s [line]:%d [info]:vi_pipe %d vi_chn %d can't change chn attr because chn will call GDC!! [func]:%s [line]:%d [info]:pipe %d chn %d can't change chn crop because some extchn binded to this phychn enable fisheye! vi_check_ext_chn_lmf_coef vi_free_region_luma_buffer [func]:%s [line]:%d [info]:Invalid frame int type:%d %8d%16llu%16llu%10llu%12llu%10llu%14llu%12llu%20llu [func]:%s [line]:%d [info]:cur left pic timeout flag %d, capture flag %d! vi_comm_vi_online_vpss_offline_irq_route [func]:%s [line]:%d [info]:Invalid pipe mode:%d [func]:%s [line]:%d [info]:vgs add region_luma task failed! [func]:%s [line]:%d [info]:pipe %d has been enable ,can not set snap attr's snap_type! VideoPipe [func]:%s [line]:%d [info]:create GDC chn fail ,0x%x! EARLY_END %8s%8s%8s%8s%8s%8s%8s%8s%8s%8s%8s%16s Enable %8s%10s%10s%10s vi_drv_check_chn_attr vi_drv_check_chn_static_attr_for_dis [func]:%s [line]:%d [info]:pipe %d chn %d :not allowed to get when not set! vi_drv_get_pipe_max_width [func]:%s [line]:%d [info]:snprintf_s BE STT buf fail! [func]:%s [line]:%d [info]:malloc VI BE STT buf fail! VI(%d,0) %s [func]:%s [line]:%d [info]:someone(%d) occupies vi wdr's vb %d! vpss_split_for_isp [func]:%s [line]:%d [info]:invalid fpn_work_mode %d. [func]:%s [line]:%d [info]:pool id invalid:%d. vi register module failed ! [func]:%s [line]:%d [info]:create picture queue fail! [func]:%s [line]:%d [info]:dev context is destroying [func]:%s [line]:%d [info]:pipe %d chn %d is not phy chn! vi pipe %d other_mod_job_cnt init failed! [func]:%s [line]:%d [info]:vi chn ID(%d) is invalid ext-chn, ext-chn's range is [%d, %d]. [func]:%s [line]:%d [info]:snprintf_s region_luma_buffer fial! vi_check_region_info [func]:%s [line]:%d [info]:vi_cap%d init fail ! -------------------------------VI PROC COST TIME STATISTIC----------------------------------------------------------- [func]:%s [line]:%d [info]:snprintf_s vi_proc_name of proc_id %d fail! vi_comm_vi_offline_vpss_offline_irq_route vi_vgs_task_call_back enable [func]:%s [line]:%d [info]:vi_pipe(%d) timer is not existed ! [func]:%s [line]:%d [info]:pipe %d chn %d get PMF out blk failed, width: %d, height: %d. [func]:%s [line]:%d [info]:illegal param: timelag(%d), range is [%d,%d]! [func]:%s [line]:%d [info]:camera_steady:%d range[0,1] %8s%8s%20s PipeId CapturedCostTime CropEn %8d%8s%8d%8d%8u%8u -------------------------------VI CHN ATTR1---------------------------------------------------------------------------- %8d%8d%8u%10u%10s%8s%12d%12d%10s%14s%14s BufCnt %8s%12s%12s%12s vi_drv_put_vb_with_ret_value [func]:%s [line]:%d [info]:pipe %d chn %d pixel format can not change, old is %d,new is %d! [func]:%s [line]:%d [info]:crop height should be %d align which is %d! [func]:%s [line]:%d [info]:crop width should between %d and %d which is %d! [func]:%s [line]:%d [info]:check spread_info attr failed vi_drv_calc_cur_pic_size [func]:%s [line]:%d [info]:pipe %d send WDR raw (vc_num:0) width %d is not same as max_h %d! [func]:%s [line]:%d [info]:only supported raw source from BE. %11s%12s%12s [2][3] [func]:%s [line]:%d [info]:pipe:%d err intterupt status:0x%x !! EOF:%d BUFOVF:%d DATATHROW:%d . [func]:%s [line]:%d [info]:pipe %d chn%d src width(%d) beyond [%d, %d]! [func]:%s [line]:%d [info]:invalid frame_num %d, must be 2^N. [func]:%s [line]:%d [info]:invalid fpn_type %d, which should be ISP_FPN_TYPE_FRAME. [func]:%s [line]:%d [info]:invalid fpn ISO(%d)! load vi for %s...OK ! [func]:%s [line]:%d [info]:pipe %d create line picture queue fail! vi_statistic_task_cost_time vi_check_chn_rotation_attr vi_set_chn_crop vi_malloc_region_luma_buffer region_num too large! SubmitCnt TmOutCnt [func]:%s [line]:%d [info]:vi proc %d ioremap reg fail ! vi_put_node_to_line_input_pic_queue vi_set_snap_pipe_attr vi_get_pro_sharpen_param [func]:%s [line]:%d [info]:pipe %d has been triggered and has not yet been finished ! [func]:%s [line]:%d [info]:userpic invalid, compress_mode:%d, don't support compressed pic. vi_add_user_pic_cover_task [func]:%s [line]:%d [info]:pipe %d add user failure! [func]:%s [line]:%d [info]:raw_data_info copy_from_user failed! ret:0x%x src:0x%llx dst:0x%lx. [func]:%s [line]:%d [info]:pipe %d chn %d vi_init_local_dis_algorithm error : 0x%x! [func]:%s [line]:%d [info]:vi enable gyro_dis failed!!! ScanM %7d%8s%10s%10u%10u%20s%8s%12x%12x%8s 1Mux FE %8s%8s%8s%8s%8s%8s SBS2 Mode %8s%8s%8s%10s%10s%8s%12s%12s%10s%14s%14s LINEAR TrimWid 4_DOF_GME [func]:%s [line]:%d [info]:vi_pipe:%d crop x+width can not bigger than dev_width! [func]:%s [line]:%d [info]:crop X should be 2 align which is %d! [func]:%s [line]:%d [info]:ldc_attr->enable should be 0/1 ! vi_drv_check_nrx_param [func]:%s [line]:%d [info]:vi_pipe %d:NRX ISO param copy to user failed, maybe the space of iso is not big enough! [func]:%s [line]:%d [info]:memcpy_s pipe_ai_nrxv2_param nrx_auto_v2 fail! [func]:%s [line]:%d [info]:pipe %d is uncompressed ! [1][0] [2][1] [func]:%s [line]:%d [info]:unsupported int_type %d VI_DEV_FLASH_SET_CTRL VI_PIPE_BNR_DUMP_ATTR_SET_CTRL VI_CHN_EARLY_INT_SET_CTRL vi_drv_check_pipe_mode %s(%d) STT vi_drv_check_frame_rate [func]:%s [line]:%d [info]:dev %d generate timing max frame rate: %d, but set frame rate is %d when clock is %d MHZ. vi_drv_hold_be_cfg vi_mkp_pipe_wdr_init vi_create_pipe_pic_queue vi_abnormal_verify_after_wait [func]:%s [line]:%d [info]:dev context is resetting vi_wait_capture_frame_stop [func]:%s [line]:%d [info]:set mod param failed. vi_get_be_stt_info [func]:%s [line]:%d [info]:pipe %d split_num %d is invalid! [func]:%s [line]:%d [info]:chanel destroy vi pipe %d get_chn_luma_sem init failed! [func]:%s [line]:%d [info]:vi dev ID(%d) is invalid vi_set_pipe_attr [func]:%s [line]:%d [info]: rotate_ex and rotate cannot on at the same time! rotate(%d),rotate_enable(%d). vi_get_ext_chn_fisheye vi_get_chn_low_dealy_attr MaxCycleCnt ListCnt StartErrCnt vi_put_repeat_node_to_line_input_pic_queue [func]:%s [line]:%d [info]:Add bypass task failed! [func]:%s [line]:%d [info]:add coverex task fail with 0x%x! [func]:%s [line]:%d [info]:pipe %d create snap raw picture queue fail! vi_snap_process_one_task vi_set_dis_attr [func]:%s [line]:%d [info]:pipe %d chn %d donot set DIS config! vi_check_chn_attr_support_dis -------------------------------VI DEV ATTR2---------------------------------------------------------------------------- Seq UVUV RGB DevHeight NrEn DiscProPic SDR8 -------------------------------VI CHN CROP INFO------------------------------------------------------------------------ %8s%8s%12s%8s%8s%8s%10s%8s%12s%14s%12s%8s %8s%12s%12s%12s%12s%12s%12s%12s%15s%10s ValidHeight vi_drv_get_chn_max_width vi_drv_check_pipe_pre_crop_attr [2][2] VI_PIPE_REPEAT_MODE_SET_CTRL VI_CHN_DIS_CONFIG_SET_CTRL vi_drv_check_quadrangle_attr [func]:%s [line]:%d [info]:vi pipe(%d) hi_size can't be bigger than %d. [func]:%s [line]:%d [info]:bit width should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:vi_pipe:%d crop.y should between [0,%d) which is %d! [func]:%s [line]:%d [info]:pipe %d vmalloc for iso failed! [func]:%s [line]:%d [info]:dev:%d width should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:vi_dev %d data rate(%d) err, shoule be DATA_RATE_X1. %04x: %08x %08x %08x %08x [func]:%s [line]:%d [info]:invalid video_format(%d) should be %d. [func]:%s [line]:%d [info]:vi chn ID(%d) is invalid [func]:%s [line]:%d [info]:param is NULL ! vi_is_phy_chn_attach_fisheye [func]:%s [line]:%d [info]:wait pipe %d capture stop timeout 120ms!!! [func]:%s [line]:%d [info]:pipe %d milli_sec %d err! [func]:%s [line]:%d [info]:pipe %d is destroying! vi_isp_clear_input_queue [func]:%s [line]:%d [info]:sys is not init vi_wake_up_condition [func]:%s [line]:%d [info]:please first set chn (%d, %d)'s attr! [func]:%s [line]:%d [info]:vi pipe %d is start, not allowed to set pipe interrupt_attr! vi_chn_detach_vb_pool [func]:%s [line]:%d [info]:pipe %d chn %d get region luma timeout,milli_sec:%d vi_comm_cap_online_frame_irq_route %9s%12s%12s%12s%12s vi_proc_comm_per_dev_init [func]:%s [line]:%d [info]:proc_id %d illegal! vi_comm_vi_online_vpss_online_irq_route vi_prepare_vgs_task_data %8s%8s%10s%10s%10s%8s%10s%12s%10s [func]:%s [line]:%d [info]:snap attr normal_attr.frame_cnt must greate than 0. [func]:%s [line]:%d [info]:snap attr pro_attr.frame_cnt:%d is error. [func]:%s [line]:%d [info]:ZSL pipe %d no space to receive this frm! [func]:%s [line]:%d [info]:check user_pic error! [func]:%s [line]:%d [info]:pipe %d can not send raw from be while vi-vpss-mode is not VI_OFFLINE_VPSS_OFFLINE nor VI_OFFLINE_VPSS_ONLINE! [func]:%s [line]:%d [info]:pipe %d illegal pipe_num: %d, should between [%d,%d] ! [func]:%s [line]:%d [info]:get gdc fisheye task fail ! vi_init_local_dis_algorithm [func]:%s [line]:%d [info]:VI:VB invalid vi_get_dis_attr [func]:%s [line]:%d [info]:pipe %d chn %d DIS attribute error! [func]:%s [line]:%d [info]:pipe %d chn %d DIS parameter error! vi_de_init_dis_algorithm [func]:%s [line]:%d [info]:submit dis task failed ,0x%x! vi_dis_check_dis_config SrcFRate RepeatMode -- SLF %14s%10u%10u%10d %8d%8d%8s%10s%8d%8d%8u%8u%8u%8u%8u%8u XRatio Angle -------------------------------VI CHN SPREAD INFO---------------------------------------------------------------------- Pan HorZoom High %8s%8s%10s%10s%10s%8s%8s%8s TotalWidth vi_drv_proc_is_wrong_int [func]:%s [line]:%d [info]:pipe %d chn %d mirror can not change, old is %d,new is %d! [func]:%s [line]:%d [info]:crop start abs_y should be 0 to %d which is %d! [func]:%s [line]:%d [info]:invalid VB [func]:%s [line]:%d [info]:pipe %d chn %d get buffer fail,hi_size %d ! [func]:%s [line]:%d [info]:vi_pipe %d:iso is NULL ! vi_drv_get_pipe_ai_nrxv2_param VI_CHN_GDC_LDC_SET_CTRL [func]:%s [line]:%d [info]:vi_pipe id should between [0,2] which is %d! [func]:%s [line]:%d [info]:pipe %d max_h should be %d align which is %d! [func]:%s [line]:%d [info]:vi_pipe(%d) only support COMPRESS_MODE_NONE! [func]:%s [line]:%d [info]:get region (type :%d) fail. vi_drv_set_pipe_nrxv2_param [func]:%s [line]:%d [info]:invalid input vi scan mode %d of dev %d [func]:%s [line]:%d [info]:invalid input vi vsync_neg %d of dev %d ================vi %d register debug info============= vi_wdr_destory_pool [func]:%s [line]:%d [info]:cfg->img_width %d is smaller than offset_read %d, fail! [func]:%s [line]:%d [info]:your width:%d, height:%d, width must be in [%d, %d], height must be in [%d, %d]. vi_check_null_ptr vi_put_linear_frame_to_queue vi_get_chn_ldc_attr vi_get_split_attr vi_disable_dev vi_destroy_pipe [func]:%s [line]:%d [info]:pipe %d must be stopped! vi_get_pipe_frame_interrupt_attr vi_check_phy_chn_id vi_set_chn_align [func]:%s [line]:%d [info]:pipe %d chn %d can't change chn attr because some extchn binded to this phychn enable fisheye! vi_check_chn_disable vi_is_all_bind_extchn_disable VI [func]:%s [line]:%d [info]:pipe %d frame_info address is invalid! %8d%16u%16u%14u%14u%16llu%14u%16u [func]:%s [line]:%d [info]:vi_cap%d ioremap reg fail ! vi_comm_cap_send_offline_frame [func]:%s [line]:%d [info]:add vgs phychn task failed! [func]:%s [line]:%d [info]:snap pipe mode must be VI_PIPE_MODE_OFFLINE in ZSL snap. vi_enable_user_pic vi_line_mode_send_pipe_raw vi_wdr_offline_wdr_pic_node_input_queue [func]:%s [line]:%d [info]:can't get gdc export function, it may be gdc module has not been inserted! vi_submit_bypass_job2_gdc [func]:%s [line]:%d [info]:get gdc task fail ! vi_gdc_ext_chn_task_call_back [func]:%s [line]:%d [info]:pipe %d chn %d vi_de_init_dis_algorithm error : 0x%x! [func]:%s [line]:%d [info]:illegal param: enable(%d), should HI_TRUE or HI_FALSE! vi_dis_wait_condition_call_back vi_dis_check_config_allow_change -------------------------------VI PIPE ATTR1--------------------------------------------------------------------------- RAW8 Intf %8s%12s%6s%6s%6s%6s%6s%6s%6s%6s%6s%6s%6s%6s%6s%6s%7s SDS1 STH2 -------------------------------VI CHN LDC INFO------------------------------------------------------------------------- 360 -------------------------------VI CHN OUTPUT RESOLUTION---------------------------------------------------------------- [func]:%s [line]:%d [info]:put vb err! 0x%x [func]:%s [line]:%d [info]:pipe %d chn %d mirror should be HI_FALSE which is %d while pixel_format is %d! [func]:%s [line]:%d [info]:the fisheye module may be not existed [func]:%s [line]:%d [info]:pipe %d illegal param: field:%d,should be VIDEO_FIELD_FRAME ! DIS [func]:%s [line]:%d [info]:pipe %d pipe_num should be %d which is %d in wdr mode! [func]:%s [line]:%d [info]:Pipe %d oneline is not support onebuf-interrupt. [0][0] [0][2] VI_CHN_ALIGN_GET_CTRL [func]:%s [line]:%d [info]:not support the operation [%s] . [func]:%s [line]:%d [info]:isp_bypass should be HI_FALSE which is %d when picture pix format is BAYER! [func]:%s [line]:%d [info]:vi_pipe %d 3DNR X s_fy.pbr6: %d, should between [%d,%d]! [func]:%s [line]:%d [info]:snprintf_s ac_buf_name fail! vi_check_comm_crop [func]:%s [line]:%d [info]:pipe %d queue is full,can't receive.!! [func]:%s [line]:%d [info]:vi_pipe(%d) is bypass_be mode, not support crop!! [func]:%s [line]:%d [info]:vi_pipe %d vi_chn %d can't change chn crop because chn will call GDC!! [func]:%s [line]:%d [info]:fisheye-len(lmf) config do not support! [func]:%s [line]:%d [info]:node is NULL! FrmFlowCnt [func]:%s [line]:%d [info]:VGS begin job fail! bZSL vi_snap_checck_snap_pro_attr [func]:%s [line]:%d [info]:can't enable snap when WDR mode is set! vi_snap_offline_pipe_init [func]:%s [line]:%d [info]:pipe:%d,the busy_num of dump_pipe_raw_pic_queue is not equal 0 ,but dump_pipe_raw_pic_queue is empty! vi_snap_check_pipe vi_user_pic_submit_bypass_job2_vgs [func]:%s [line]:%d [info]:end job fail with 0x%x! [func]:%s [line]:%d [info]:pipe %d hi_video_frame address is invalid! [func]:%s [line]:%d [info]:enable should be 0 or 1 which is %d! vi_gdc_bypass_task_call_back [func]:%s [line]:%d [info]:DIS donot support filp or mirror vi_pipe %d vi_chn %d! [func]:%s [line]:%d [info]:vi enable global_dis failed!!! [func]:%s [line]:%d [info]:pipe %d chn %d crop_ratio not allow change when scale false! %2d, FrameSource VCNum EarlyLine Stride %8d%8d%8s%8d%8u%10u%12d%12d%10s%14s%14s%10u -------------------------------VI EXTCHN ATTR2------------------------------------------------------------------------- -------------------------------VI CHN ROTATION INFO-------------------------------------------------------------------- Coef Desktop Ceiling OutY CamSteady LostFrame VbFail [func]:%s [line]:%d [info]:isp_bypass of pipe %d attribute can't be changed! vi_drv_malloc_model_buf [func]:%s [line]:%d [info]:pipe %d send LINE raw width %d is not same as pipe's max_w %d! vi_drv_check_pipe_raw_source [func]:%s [line]:%d [info]:grp%d chn%d fisheye output image hi_size width: %d, height: %d is big than %d_x%d. [func]:%s [line]:%d [info]:invalid VI-VPSS mode mode[%d] %d, shoule be [%d, %d] vi_drv_get_pipe_cmp_param Pipe1Mode VI_CHN_ROTATION_GET_CTRL [func]:%s [line]:%d [info]:vi_pipe:%d picture height should between [%d,%d] which is %d! [func]:%s [line]:%d [info]:malloc DRC COEF buf fail! [func]:%s [line]:%d [info]:invalid input data type %d of vi dev %d, must be in [VI_DATA_TYPE_YUV, VI_DATA_TYPE_BUTT) vi_drv_check_wdr_attr [func]:%s [line]:%d [info]:vi_wdr_get_vb failed. [func]:%s [line]:%d [info]:isp_drv_hold_busy_be_buf failed! vi_drv_get_be_stt_info vi_drv_check_fpn_attr [func]:%s [line]:%d [info]:invalid op_type %d, which should be OP_TYPE_AUTO or OP_TYPE_MANUAL. can not find vi proc IRQ load vi for %s...failed ! vi_set_pipe_raw_source vi_get_pipe_nrx_param [func]:%s [line]:%d [info]:vi_pipe(%d) vi_chn(%d) pixel_format(%d) not support! vi_check_chn_crop [func]:%s [line]:%d [info]:pipe%d extchn%d still enabled,which is binded phy chn%d vi_set_ext_chn_fisheye vi_comm_proc_int_analysis [func]:%s [line]:%d [info]:Begin vgs normal job failed! [func]:%s [line]:%d [info]:add region_luma task fail with 0x%x! [func]:%s [line]:%d [info]:pipe %d has been enable ,can not set snap attr's normal_attr! vi_enable_snap_pipe vi_trigger_snap_pipe [func]:%s [line]:%d [info]:snap attr snap_type:%d is error. [func]:%s [line]:%d [info]:set isp %d pro enable error %x. [func]:%s [line]:%d [info]:snap pipe %d no space to receive this frm! [func]:%s [line]:%d [info]:raw_data_info copy_from_user failed! i:%d ret:0x%x src:0x%llx dst:0x%lx. [func]:%s [line]:%d [info]:when spread and LDC on,LDC ratio(%d) cannot smaller than 0. vi_destroy_gdc_chn [func]:%s [line]:%d [info]:submit gdc bypass task fail ! [func]:%s [line]:%d [info]:get gdc normal task fail ! vi_gdc_last_task_call_back [func]:%s [line]:%d [info]:DIS only support COMPRESS_MODE_NONE,donot support %d compress_mode ! [func]:%s [line]:%d [info]:buf_num:%d range[%d,%d]! Private BT656_PACKED_YUV HISPI VYUY %7d%12s%12d%10d%12d BypassBe Frame Line EARLY_ONE_BUF Head LineCnt 270 -------------------------------VI CHN ROTATIO_EX INFO------------------------------------------------------------------ TYPICAL %8s%8s%8s%8s%8s%10s Normal Roef LowFreqMotionPreserve CurSoftTm [func]:%s [line]:%d [info]:pipe %d malloc DRV context fail! [func]:%s [line]:%d [info]:pipe %d chn %d hi_size can not change, old hi_size is [%d, %d], new hi_size is [%d, %d]! [func]:%s [line]:%d [info]:pipe %d :pixel format of all phy chn should be same, while chn %d's is %d but chn %d's is %d !! [func]:%s [line]:%d [info]:grp%d chn%d fisheye output image hi_size width: %d, height: %d is small than %d_x%d. [func]:%s [line]:%d [info]:pipe %d line_cnt should be [0, %d). VI_PIPE_SNAP_PRO_BNR_PARAM_GET_CTRL VI_PIPE_BNR_DUMP_ATTR_GET_CTRL VI_PIPE_INT_ENABLE_CTRL VI_EXTCHN_ATTR_GET_CTRL [func]:%s [line]:%d [info]:vi pipe_mode(%d) only support VI_PIPE_BYPASS_NONE! [func]:%s [line]:%d [info]:picture pix format should be YUV or BAYER which is %d! [func]:%s [line]:%d [info]:bit_width width: %d illegal, should be %d when YUV! [func]:%s [line]:%d [info]:dst_frame_rate(%d) is wrong,should be [0, %d] [func]:%s [line]:%d [info]:vi dev(%d) dev hi_size can't be bigger than %d. offline [func]:%s [line]:%d [info]:isp_drv_get_ready_be_buf failed! X & ,
, vi \ t t 0z Dj | `s t Tu u u v x | } D X L
Linker: LLD 10.0.1 (/data/62608-merged/toolchain/llvm-project/lld edbc9c219ecd6a6c7f4c3125524a9fc2c4bc57f6) OHOS () clang version 10.0.1.62608 (llvm-project edbc9c219ecd6a6c7f4c3125524a9fc2c4bc57f6)
.dynsym .gnu.hash .hash .dynstr .rel.dyn .ARM.exidx .rel.plt .rodata .eh_frame_hdr .eh_frame .text .init .fini .plt .init_array .fini_array .data.rel.ro .dynamic .got .got.plt .data .bss .ARM.attributes .comment .shstrtab