| /kernel/linux/linux-5.10/Documentation/fb/ |
| D | viafb.modes | 10 # 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock)
28 mode "640x480-60"
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
31 timings 39722 48 16 33 10 96 2 endmode mode "480x640-60"
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
35 # 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock)
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
56 # 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock)
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
77 # 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock)
[all …]
|
| /kernel/linux/linux-4.19/Documentation/fb/ |
| D | viafb.modes | 10 # 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock)
28 mode "640x480-60"
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
31 timings 39722 48 16 33 10 96 2 endmode mode "480x640-60"
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
35 # 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock)
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
56 # 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock)
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
77 # 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock)
[all …]
|
| D | matroxfb.txt | 271 maxclk:X - maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
276 70 for modes derived from `vesa' with yres <= 400, 60Hz for
301 83 MHz on G200
302 66 MHz on Millennium I
303 60 MHz on Millennium II
308 + my Millennium G200 oscillator has frequency range from 35 MHz to 380 MHz
309 (and it works with 8bpp on about 320 MHz dotclocks (and changed mclk)).
310 But Matrox says on product sheet that VCO limit is 50-250 MHz, so I believe
335 It is time to redraw whole screen 1000 times in 1024x768, 60Hz. It is
340 faster, it is kernel-space only time on P-II/350 MHz, Millennium I in 33 MHz
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/mfd/ |
| D | omap-usb-host.txt | 40 * "usbhost_120m_fck" - 120MHz Functional clock.
43 * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
44 * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
45 * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
51 * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
52 * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
53 * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
54 * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
55 * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
56 * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mfd/ |
| D | omap-usb-host.txt | 40 * "usbhost_120m_fck" - 120MHz Functional clock.
43 * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
44 * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
45 * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
51 * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
52 * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
53 * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
54 * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
55 * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
56 * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
|
| /kernel/linux/linux-4.19/drivers/video/fbdev/ |
| D | macmodes.c | 36 /* 512x384, 60Hz, Non-Interlaced (15.67 MHz dot clock) */
37 "mac2", 60, 512, 384, 63828, 80, 16, 19, 1, 32, 3,
40 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
41 "mac5", 60, 640, 480, 39722, 32, 32, 33, 10, 96, 2,
44 /* 640x480, 67Hz, Non-Interlaced (30.0 MHz dotclock) */
48 /* 640x870, 75Hz (portrait), Non-Interlaced (57.28 MHz dot clock) */
52 /* 800x600, 56 Hz, Non-Interlaced (36.00 MHz dotclock) */
56 /* 800x600, 60 Hz, Non-Interlaced (40.00 MHz dotclock) */
57 "mac10", 60, 800, 600, 25000, 72, 56, 23, 1, 128, 4,
60 /* 800x600, 72 Hz, Non-Interlaced (50.00 MHz dotclock) */
[all …]
|
| D | valkyriefb.h | 83 * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
106 { 11, 28, 3 }, /* pixel clock = 79.55MHz for V=74.50Hz */
112 /* This used to be 12, 30, 3 for pixel clock = 78.12MHz for V=72.12Hz, but
122 { 12, 29, 3 }, /* pixel clock = 75.52MHz for V=69.71Hz? */
130 /* Register values for 1024x768, 60Hz mode (14) */
133 { 15, 31, 3 }, /* pixel clock = 64.58MHz for V=59.62Hz */
142 { 23, 42, 3 }, /* pixel clock = 57.07MHz for V=74.27Hz */
150 { 17, 27, 3 }, /* pixel clock = 49.63MHz for V=71.66Hz */
155 /* Register values for 800x600, 60Hz mode (10) */
158 { 25, 32, 3 }, /* pixel clock = 40.0015MHz,
[all …]
|
| /kernel/linux/linux-5.10/drivers/video/fbdev/ |
| D | macmodes.c | 36 /* 512x384, 60Hz, Non-Interlaced (15.67 MHz dot clock) */
37 "mac2", 60, 512, 384, 63828, 80, 16, 19, 1, 32, 3,
40 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
41 "mac5", 60, 640, 480, 39722, 32, 32, 33, 10, 96, 2,
44 /* 640x480, 67Hz, Non-Interlaced (30.0 MHz dotclock) */
48 /* 640x870, 75Hz (portrait), Non-Interlaced (57.28 MHz dot clock) */
52 /* 800x600, 56 Hz, Non-Interlaced (36.00 MHz dotclock) */
56 /* 800x600, 60 Hz, Non-Interlaced (40.00 MHz dotclock) */
57 "mac10", 60, 800, 600, 25000, 72, 56, 23, 1, 128, 4,
60 /* 800x600, 72 Hz, Non-Interlaced (50.00 MHz dotclock) */
[all …]
|
| D | valkyriefb.h | 79 * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
102 { 11, 28, 3 }, /* pixel clock = 79.55MHz for V=74.50Hz */
108 /* This used to be 12, 30, 3 for pixel clock = 78.12MHz for V=72.12Hz, but
118 { 12, 29, 3 }, /* pixel clock = 75.52MHz for V=69.71Hz? */
126 /* Register values for 1024x768, 60Hz mode (14) */
129 { 15, 31, 3 }, /* pixel clock = 64.58MHz for V=59.62Hz */
138 { 23, 42, 3 }, /* pixel clock = 57.07MHz for V=74.27Hz */
146 { 17, 27, 3 }, /* pixel clock = 49.63MHz for V=71.66Hz */
151 /* Register values for 800x600, 60Hz mode (10) */
154 { 25, 32, 3 }, /* pixel clock = 40.0015MHz,
[all …]
|
| /kernel/linux/linux-5.10/arch/powerpc/boot/ |
| D | util.S | 22 * timebase in nanoseconds. This used to be hardcoded to be 60ns
23 * (period of 66MHz/4). Now a variable is used that is initialized to
24 * 60 for backward compatibility, but it can be overridden as necessary
32 .long 60
43 * timebase_period_ns defaults to 60 (16.6MHz) */
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/usb/ |
| D | qcom,dwc3.txt | 13 "core" Master/Core clock, have to be >= 125 MHz for SS
14 operation and >= 60MHz for HS operation
16 host mode. Its frequency should be 19.2MHz.
29 19.2Mhz (192000000) for MOCK_UTMI_CLK
30 >=125Mhz (125000000) for MASTER_CLK in SS mode
31 >=60Mhz (60000000) for MASTER_CLK in HS mode
|
| /kernel/linux/linux-4.19/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ |
| D | phy_shim.h | 45 #define FRA_ERR_20MHZ 60
80 /* Index for first 20MHz OFDM SISO rate */
82 /* Index for first 20MHz OFDM CDD rate */
84 /* Index for first 40MHz OFDM SISO rate */
86 /* Index for first 40MHz OFDM CDD rate */
87 #define WL_TX_POWER_OFDM40_CDD_FIRST 60
89 /* Index for first 20MHz MCS SISO rate */
91 /* Index for first 20MHz MCS CDD rate */
93 /* Index for first 20MHz MCS STBC rate */
95 /* Index for first 20MHz MCS SDM rate */
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ |
| D | phy_shim.h | 45 #define FRA_ERR_20MHZ 60
80 /* Index for first 20MHz OFDM SISO rate */
82 /* Index for first 20MHz OFDM CDD rate */
84 /* Index for first 40MHz OFDM SISO rate */
86 /* Index for first 40MHz OFDM CDD rate */
87 #define WL_TX_POWER_OFDM40_CDD_FIRST 60
89 /* Index for first 20MHz MCS SISO rate */
91 /* Index for first 20MHz MCS CDD rate */
93 /* Index for first 20MHz MCS STBC rate */
95 /* Index for first 20MHz MCS SDM rate */
[all …]
|
| /kernel/linux/linux-4.19/arch/powerpc/boot/ |
| D | util.S | 27 * timebase in nanoseconds. This used to be hardcoded to be 60ns
28 * (period of 66MHz/4). Now a variable is used that is initialized to
29 * 60 for backward compatibility, but it can be overridden as necessary
37 .long 60
61 * timebase_period_ns defaults to 60 (16.6MHz) */
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/usb/ |
| D | qcom,dwc3.yaml | 44 - description: Master/Core clock, has to be >= 125 MHz
45 for SS operation and >= 60MHz for HS operation.
48 in host mode. Its frequency should be 19.2MHz.
67 - description: Must be 19.2MHz (19200000).
68 - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode.
|
| /kernel/linux/linux-5.10/drivers/net/wireless/mediatek/mt76/ |
| D | mt76x02_dfs.c | 29 /* 20MHz */
34 RADAR_SPEC(3, 60, 20, 46, 300, 640, 80, 4900, 10100, 80, 0,
38 /* 40MHz */
43 RADAR_SPEC(3, 60, 20, 46, 300, 640, 80, 4900, 10100, 80, 0,
47 /* 80MHz */
52 RADAR_SPEC(3, 60, 20, 46, 300, 640, 80, 4900, 10100, 80, 0,
59 /* 20MHz */
66 RADAR_SPEC(2, 60, 15, 63, 640, 2080, 32, 19600, 40200, 32, 0,
68 /* 40MHz */
75 RADAR_SPEC(2, 60, 15, 63, 640, 2080, 32, 19600, 40200, 32, 0,
[all …]
|
| /kernel/linux/linux-4.19/drivers/net/wireless/mediatek/mt76/ |
| D | mt76x2_dfs.c | 40 /* 20MHz */
45 RADAR_SPEC(3, 60, 20, 46, 300, 640, 80, 4900, 10100, 80, 0,
49 /* 40MHz */
54 RADAR_SPEC(3, 60, 20, 46, 300, 640, 80, 4900, 10100, 80, 0,
58 /* 80MHz */
63 RADAR_SPEC(3, 60, 20, 46, 300, 640, 80, 4900, 10100, 80, 0,
70 /* 20MHz */
77 RADAR_SPEC(2, 60, 15, 63, 640, 2080, 32, 19600, 40200, 32, 0,
79 /* 40MHz */
86 RADAR_SPEC(2, 60, 15, 63, 640, 2080, 32, 19600, 40200, 32, 0,
[all …]
|
| /kernel/linux/linux-4.19/Documentation/media/uapi/v4l/ |
| D | vidioc-enumstd.rst | 140 ``V4L2_STD_PAL_60`` is a hybrid standard with 525 lines, 60 Hz refresh
141 rate, and PAL color modulation with a 4.43 MHz color subcarrier. Some
143 a 50/60 Hz agnostic PAL TV.
152 ``V4L2_STD_NTSC_443`` is a hybrid standard with 525 lines, 60 Hz refresh
153 rate, and NTSC color modulation with a 4.43 MHz color subcarrier.
276 * - Nominal radio-frequency channel bandwidth (MHz)
288 * - Sound carrier relative to vision carrier (MHz)
340 New Zealand uses a sound carrier displaced 5.4996 ± 0.0005 MHz from
346 is being introduced. The second carrier is 5.85 MHz above the vision
352 second sound carrier is 6.552 MHz above the vision carrier and is
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/v4l/ |
| D | vidioc-enumstd.rst | 136 ``V4L2_STD_PAL_60`` is a hybrid standard with 525 lines, 60 Hz refresh
137 rate, and PAL color modulation with a 4.43 MHz color subcarrier. Some
139 a 50/60 Hz agnostic PAL TV.
147 ``V4L2_STD_NTSC_443`` is a hybrid standard with 525 lines, 60 Hz refresh
148 rate, and NTSC color modulation with a 4.43 MHz color subcarrier.
268 * - Nominal radio-frequency channel bandwidth (MHz)
280 * - Sound carrier relative to vision carrier (MHz)
331 New Zealand uses a sound carrier displaced 5.4996 ± 0.0005 MHz from
337 is being introduced. The second carrier is 5.85 MHz above the vision
343 second sound carrier is 6.552 MHz above the vision carrier and is
[all …]
|
| /kernel/linux/linux-4.19/drivers/staging/iio/adc/ |
| D | ad7192.h | 19 * 0 External 4.92 MHz clock connected from MCLK1 to MCLK2
21 * 2 Internal 4.92 MHz Clock not available at the MCLK2 pin
22 * 3 Internal 4.92 MHz Clock available at the MCLK2 pin
24 * the driver uses the internal clock (16.776 MHz)
26 * @rej60_en: 50/60Hz notch filter enable
|
| /kernel/linux/linux-4.19/drivers/staging/vt6655/ |
| D | rf.c | 57 0x03F79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 1, Tf = 2412MHz */
58 0x03F79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 2, Tf = 2417MHz */
59 0x03E79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 3, Tf = 2422MHz */
60 0x03E79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 4, Tf = 2427MHz */
61 0x03F7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 5, Tf = 2432MHz */
62 0x03F7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 6, Tf = 2437MHz */
63 0x03E7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 7, Tf = 2442MHz */
64 0x03E7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 8, Tf = 2447MHz */
65 0x03F7B000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 9, Tf = 2452MHz */
66 0x03F7B000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 10, Tf = 2457MHz */
[all …]
|
| /kernel/linux/linux-5.10/drivers/staging/vt6655/ |
| D | rf.c | 57 0x03F79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 1, Tf = 2412MHz */
58 0x03F79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 2, Tf = 2417MHz */
59 0x03E79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 3, Tf = 2422MHz */
60 0x03E79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 4, Tf = 2427MHz */
61 0x03F7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 5, Tf = 2432MHz */
62 0x03F7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 6, Tf = 2437MHz */
63 0x03E7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 7, Tf = 2442MHz */
64 0x03E7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 8, Tf = 2447MHz */
65 0x03F7B000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 9, Tf = 2452MHz */
66 0x03F7B000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 10, Tf = 2457MHz */
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
| D | max8952.txt | 15 - 0: 26 MHz
16 - 1: 13 MHz
17 - 2: 19.2 MHz
18 Defaults to 26 MHz if not specified.
33 vdd_arm_reg: pmic@60 {
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/regulator/ |
| D | max8952.txt | 15 - 0: 26 MHz
16 - 1: 13 MHz
17 - 2: 19.2 MHz
18 Defaults to 26 MHz if not specified.
33 vdd_arm_reg: pmic@60 {
|
| /kernel/linux/linux-4.19/drivers/usb/gadget/udc/ |
| D | fsl_mxc_udc.c | 59 /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ in fsl_udc_clk_init()
64 dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); in fsl_udc_clk_init()
|