| /kernel/linux/linux-5.10/sound/soc/codecs/ |
| D | tlv320aic32x4.c | 425 SND_SOC_DAPM_MUX("IN1_R to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
427 SND_SOC_DAPM_MUX("IN2_R to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
429 SND_SOC_DAPM_MUX("IN3_R to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
431 SND_SOC_DAPM_MUX("IN2_L to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
433 SND_SOC_DAPM_MUX("CM_R to Right Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
435 SND_SOC_DAPM_MUX("IN1_L to Right Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
437 SND_SOC_DAPM_MUX("IN3_L to Right Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
441 SND_SOC_DAPM_MUX("IN1_L to Left Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
443 SND_SOC_DAPM_MUX("IN2_L to Left Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
445 SND_SOC_DAPM_MUX("IN3_L to Left Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
[all …]
|
| D | tlv320adcx140.c | 215 SOC_DAPM_ENUM("CH1 Resistor Select", in1_resistor_enum),
218 SOC_DAPM_ENUM("CH2 Resistor Select", in2_resistor_enum),
221 SOC_DAPM_ENUM("CH3 Resistor Select", in3_resistor_enum),
224 SOC_DAPM_ENUM("CH4 Resistor Select", in4_resistor_enum),
455 SND_SOC_DAPM_MUX("IN1 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
457 SND_SOC_DAPM_MUX("IN2 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
459 SND_SOC_DAPM_MUX("IN3 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
461 SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
517 {"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
518 {"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
[all …]
|
| /kernel/linux/linux-4.19/sound/soc/codecs/ |
| D | tlv320aic32x4.c | 422 SND_SOC_DAPM_MUX("IN1_R to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
424 SND_SOC_DAPM_MUX("IN2_R to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
426 SND_SOC_DAPM_MUX("IN3_R to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
428 SND_SOC_DAPM_MUX("IN2_L to Right Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
430 SND_SOC_DAPM_MUX("CM_R to Right Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
432 SND_SOC_DAPM_MUX("IN1_L to Right Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
434 SND_SOC_DAPM_MUX("IN3_L to Right Mixer Negative Resistor", SND_SOC_NOPM, 0, 0,
438 SND_SOC_DAPM_MUX("IN1_L to Left Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
440 SND_SOC_DAPM_MUX("IN2_L to Left Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
442 SND_SOC_DAPM_MUX("IN3_L to Left Mixer Positive Resistor", SND_SOC_NOPM, 0, 0,
[all …]
|
| /kernel/linux/linux-4.19/arch/arm/plat-samsung/include/plat/ |
| D | gpio-cfg-helpers.h | 47 /* Pull-{up,down} resistor controls.
62 * bit configuring the presence of a pull-up resistor.
74 * bit configuring the presence of a pull-down resistor.
88 * bits configuring the presence of a pull resistor, in the following
90 * 00 = No pull resistor connected
91 * 01 = Pull-up resistor connected
92 * 10 = Pull-down resistor connected
104 * This helper function reads the state of the pull-{up,down} resistor
115 * This helper function reads the state of the pull-up resistor for the
126 * This helper function reads the state of the pull-down resistor for the
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-s3c/ |
| D | gpio-cfg-helpers.h | 47 /* Pull-{up,down} resistor controls.
62 * bit configuring the presence of a pull-up resistor.
74 * bit configuring the presence of a pull-down resistor.
88 * bits configuring the presence of a pull resistor, in the following
90 * 00 = No pull resistor connected
91 * 01 = Pull-up resistor connected
92 * 10 = Pull-down resistor connected
104 * This helper function reads the state of the pull-{up,down} resistor
115 * This helper function reads the state of the pull-up resistor for the
126 * This helper function reads the state of the pull-down resistor for the
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/dac/ |
| D | ad5755.txt | 20 - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
21 external resistor and thereby bypasses
22 the internal compensation resistor.
55 - adi,ext-current-sense-resistor: boolean set if the hardware a external
56 current sense resistor.
103 adi,ext-current-sense-resistor;
109 adi,ext-current-sense-resistor;
115 adi,ext-current-sense-resistor;
121 adi,ext-current-sense-resistor;
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/iio/dac/ |
| D | ad5755.txt | 20 - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
21 external resistor and thereby bypasses
22 the internal compensation resistor.
55 - adi,ext-current-sense-resistor: boolean set if the hardware a external
56 current sense resistor.
103 adi,ext-current-sense-resistor;
109 adi,ext-current-sense-resistor;
115 adi,ext-current-sense-resistor;
121 adi,ext-current-sense-resistor;
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,spmi-iadc.txt | 5 through an external resistor (channel 1) or internal (built-in) resistor
6 (channel 0). When using an external resistor it is to be described by
7 qcom,external-resistor-micro-ohms property.
26 - qcom,external-resistor-micro-ohms:
38 qcom,external-resistor-micro-ohms = <10000>;
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,spmi-iadc.txt | 5 through an external resistor (channel 1) or internal (built-in) resistor
6 (channel 0). When using an external resistor it is to be described by
7 qcom,external-resistor-micro-ohms property.
26 - qcom,external-resistor-micro-ohms:
38 qcom,external-resistor-micro-ohms = <10000>;
|
| D | max9611.txt | 10 - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
11 resistor
20 shunt-resistor-micro-ohms = <5000>;
26 A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
|
| /kernel/linux/linux-4.19/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp-zcu106-revA.dts | 182 shunt-resistor = <5000>;
187 shunt-resistor = <5000>;
192 shunt-resistor = <5000>;
197 shunt-resistor = <5000>;
202 shunt-resistor = <5000>;
207 shunt-resistor = <5000>;
212 shunt-resistor = <5000>;
217 shunt-resistor = <5000>;
222 shunt-resistor = <5000>;
227 shunt-resistor = <5000>;
[all …]
|
| D | zynqmp-zcu102-revA.dts | 207 shunt-resistor = <5000>;
212 shunt-resistor = <5000>;
217 shunt-resistor = <5000>;
222 shunt-resistor = <5000>;
227 shunt-resistor = <5000>;
232 shunt-resistor = <5000>;
237 shunt-resistor = <5000>;
242 shunt-resistor = <5000>;
247 shunt-resistor = <5000>;
252 shunt-resistor = <5000>;
[all …]
|
| D | zynqmp-zcu111-revA.dts | 157 shunt-resistor = <2000>;
162 shunt-resistor = <5000>;
167 shunt-resistor = <5000>;
172 shunt-resistor = <5000>;
177 shunt-resistor = <5000>;
182 shunt-resistor = <2000>;
187 shunt-resistor = <5000>;
192 shunt-resistor = <5000>;
197 shunt-resistor = <5000>;
202 shunt-resistor = <5000>;
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/sound/ |
| D | sgtl5000.txt | 20 - micbias-resistor-k-ohms : the bias resistor to be used in kOhms
21 The resistor can take values of 2k, 4k or 8k.
24 micbias resistor is set to 4K.
47 micbias-resistor-k-ohms = <2>;
|
| /kernel/linux/linux-4.19/Documentation/hwmon/ |
| D | ltc2990 | 20 measure current through a series resistor, or a temperature with an external
43 curr1_input Current in mA across V1-V2 assuming a 1mOhm sense resistor
44 curr2_input Current in mA across V3-V4 assuming a 1mOhm sense resistor
48 sense resistor. Divide the reported value by the actual sense resistor value
|
| D | ltc4260 | 40 value of the divider resistor against the measured voltage and R2 is the value
41 of the divider resistor against Ground.
44 Current Sense register. The reported value assumes that a 1 mOhm sense resistor
45 is installed. If a different sense resistor is installed, calculate the real
46 current by dividing the reported value by the sense resistor value in mOhm.
|
| D | ltc4261 | 40 value of the divider resistor against the measured voltage and R2 is the value
41 of the divider resistor against Ground.
44 Current Sense register. The reported value assumes that a 1 mOhm sense resistor
45 is installed. If a different sense resistor is installed, calculate the real
46 current by dividing the reported value by the sense resistor value in mOhm.
|
| D | ltc2945 | 40 value of the divider resistor against the measured voltage and R2 is the value
41 of the divider resistor against Ground.
44 Current Sense register. The reported value assumes that a 1 mOhm sense resistor
45 is installed. If a different sense resistor is installed, calculate the real
46 current by dividing the reported value by the sense resistor value in mOhm.
|
| /kernel/linux/linux-5.10/Documentation/hwmon/ |
| D | ltc4260.rst | 46 value of the divider resistor against the measured voltage and R2 is the value
47 of the divider resistor against Ground.
50 Current Sense register. The reported value assumes that a 1 mOhm sense resistor
51 is installed. If a different sense resistor is installed, calculate the real
52 current by dividing the reported value by the sense resistor value in mOhm.
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp-zcu106-revA.dts | 258 shunt-resistor = <5000>;
265 shunt-resistor = <5000>;
272 shunt-resistor = <5000>;
279 shunt-resistor = <5000>;
286 shunt-resistor = <5000>;
293 shunt-resistor = <5000>;
300 shunt-resistor = <5000>;
307 shunt-resistor = <5000>;
314 shunt-resistor = <5000>;
321 shunt-resistor = <5000>;
[all …]
|
| D | zynqmp-zcu102-revA.dts | 258 shunt-resistor = <5000>;
265 shunt-resistor = <5000>;
272 shunt-resistor = <5000>;
279 shunt-resistor = <5000>;
286 shunt-resistor = <5000>;
293 shunt-resistor = <5000>;
300 shunt-resistor = <5000>;
307 shunt-resistor = <5000>;
314 shunt-resistor = <5000>;
321 shunt-resistor = <5000>;
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/potentiostat/ |
| D | lmp91000.txt | 14 - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
15 needs to be set to signal that an external resistor value is being used.
19 - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
22 - ti,rload-ohm: ohm value of the internal resistor load applied to the gas
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/power/supply/ |
| D | ltc2941.txt | 13 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
15 resistor.
26 lltc,resistor-sense = <15>;
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/iio/potentiostat/ |
| D | lmp91000.txt | 14 - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
15 needs to be set to signal that an external resistor value is being used.
19 - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
22 - ti,rload-ohm: ohm value of the internal resistor load applied to the gas
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/power/supply/ |
| D | ltc2941.txt | 13 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
15 resistor.
26 lltc,resistor-sense = <15>;
|