1Toshiba TC358767 eDP bridge bindings 2 3Required properties: 4 - compatible: "toshiba,tc358767" 5 - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins 6 - clock-names: should be "ref" 7 - clocks: OF device-tree clock specification for refclk input. The reference 8 clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. 9 10Optional properties: 11 - shutdown-gpios: OF device-tree gpio specification for SD pin 12 (active high shutdown input) 13 - reset-gpios: OF device-tree gpio specification for RSTX pin 14 (active low system reset) 15 - ports: the ports node can contain video interface port nodes to connect 16 to a DPI/DSI source and to an eDP/DP sink according to [1][2]: 17 - port@0: DSI input port 18 - port@1: DPI input port 19 - port@2: eDP/DP output port 20 21[1]: Documentation/devicetree/bindings/graph.txt 22[2]: Documentation/devicetree/bindings/media/video-interfaces.txt 23 24Example: 25 edp-bridge@68 { 26 compatible = "toshiba,tc358767"; 27 reg = <0x68>; 28 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 29 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 30 clock-names = "ref"; 31 clocks = <&edp_refclk>; 32 33 ports { 34 #address-cells = <1>; 35 #size-cells = <0>; 36 37 port@1 { 38 reg = <1>; 39 40 bridge_in: endpoint { 41 remote-endpoint = <&dpi_out>; 42 }; 43 }; 44 45 port@2 { 46 reg = <2>; 47 48 bridge_out: endpoint { 49 remote-endpoint = <&panel_in>; 50 }; 51 }; 52 }; 53 }; 54