1 // SPDX-License-Identifier: GPL-2.0
2 /* Realtek SMI library helpers for the RTL8366x variants
3 * RTL8366RB and RTL8366S
4 *
5 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
6 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
7 * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
8 * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
9 * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
10 */
11 #include <linux/if_bridge.h>
12 #include <net/dsa.h>
13
14 #include "realtek-smi.h"
15
rtl8366_mc_is_used(struct realtek_smi * smi,int mc_index,int * used)16 int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
17 {
18 int ret;
19 int i;
20
21 *used = 0;
22 for (i = 0; i < smi->num_ports; i++) {
23 int index = 0;
24
25 ret = smi->ops->get_mc_index(smi, i, &index);
26 if (ret)
27 return ret;
28
29 if (mc_index == index) {
30 *used = 1;
31 break;
32 }
33 }
34
35 return 0;
36 }
37 EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
38
39 /**
40 * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
41 * @smi: the Realtek SMI device instance
42 * @vid: the VLAN ID to look up or allocate
43 * @vlanmc: the pointer will be assigned to a pointer to a valid member config
44 * if successful
45 * @return: index of a new member config or negative error number
46 */
rtl8366_obtain_mc(struct realtek_smi * smi,int vid,struct rtl8366_vlan_mc * vlanmc)47 static int rtl8366_obtain_mc(struct realtek_smi *smi, int vid,
48 struct rtl8366_vlan_mc *vlanmc)
49 {
50 struct rtl8366_vlan_4k vlan4k;
51 int ret;
52 int i;
53
54 /* Try to find an existing member config entry for this VID */
55 for (i = 0; i < smi->num_vlan_mc; i++) {
56 ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
57 if (ret) {
58 dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
59 i, vid);
60 return ret;
61 }
62
63 if (vid == vlanmc->vid)
64 return i;
65 }
66
67 /* We have no MC entry for this VID, try to find an empty one */
68 for (i = 0; i < smi->num_vlan_mc; i++) {
69 ret = smi->ops->get_vlan_mc(smi, i, vlanmc);
70 if (ret) {
71 dev_err(smi->dev, "error searching for VLAN MC %d for VID %d\n",
72 i, vid);
73 return ret;
74 }
75
76 if (vlanmc->vid == 0 && vlanmc->member == 0) {
77 /* Update the entry from the 4K table */
78 ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
79 if (ret) {
80 dev_err(smi->dev, "error looking for 4K VLAN MC %d for VID %d\n",
81 i, vid);
82 return ret;
83 }
84
85 vlanmc->vid = vid;
86 vlanmc->member = vlan4k.member;
87 vlanmc->untag = vlan4k.untag;
88 vlanmc->fid = vlan4k.fid;
89 ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
90 if (ret) {
91 dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
92 i, vid);
93 return ret;
94 }
95
96 dev_dbg(smi->dev, "created new MC at index %d for VID %d\n",
97 i, vid);
98 return i;
99 }
100 }
101
102 /* MC table is full, try to find an unused entry and replace it */
103 for (i = 0; i < smi->num_vlan_mc; i++) {
104 int used;
105
106 ret = rtl8366_mc_is_used(smi, i, &used);
107 if (ret)
108 return ret;
109
110 if (!used) {
111 /* Update the entry from the 4K table */
112 ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
113 if (ret)
114 return ret;
115
116 vlanmc->vid = vid;
117 vlanmc->member = vlan4k.member;
118 vlanmc->untag = vlan4k.untag;
119 vlanmc->fid = vlan4k.fid;
120 ret = smi->ops->set_vlan_mc(smi, i, vlanmc);
121 if (ret) {
122 dev_err(smi->dev, "unable to set/update VLAN MC %d for VID %d\n",
123 i, vid);
124 return ret;
125 }
126 dev_dbg(smi->dev, "recycled MC at index %i for VID %d\n",
127 i, vid);
128 return i;
129 }
130 }
131
132 dev_err(smi->dev, "all VLAN member configurations are in use\n");
133 return -ENOSPC;
134 }
135
rtl8366_set_vlan(struct realtek_smi * smi,int vid,u32 member,u32 untag,u32 fid)136 int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
137 u32 untag, u32 fid)
138 {
139 struct rtl8366_vlan_mc vlanmc;
140 struct rtl8366_vlan_4k vlan4k;
141 int mc;
142 int ret;
143
144 if (!smi->ops->is_vlan_valid(smi, vid))
145 return -EINVAL;
146
147 dev_dbg(smi->dev,
148 "setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
149 vid, member, untag);
150
151 /* Update the 4K table */
152 ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k);
153 if (ret)
154 return ret;
155
156 vlan4k.member |= member;
157 vlan4k.untag |= untag;
158 vlan4k.fid = fid;
159 ret = smi->ops->set_vlan_4k(smi, &vlan4k);
160 if (ret)
161 return ret;
162
163 dev_dbg(smi->dev,
164 "resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
165 vid, vlan4k.member, vlan4k.untag);
166
167 /* Find or allocate a member config for this VID */
168 ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
169 if (ret < 0)
170 return ret;
171 mc = ret;
172
173 /* Update the MC entry */
174 vlanmc.member |= member;
175 vlanmc.untag |= untag;
176 vlanmc.fid = fid;
177
178 /* Commit updates to the MC entry */
179 ret = smi->ops->set_vlan_mc(smi, mc, &vlanmc);
180 if (ret)
181 dev_err(smi->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
182 mc, vid);
183 else
184 dev_dbg(smi->dev,
185 "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
186 vid, vlanmc.member, vlanmc.untag);
187
188 return ret;
189 }
190 EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
191
rtl8366_set_pvid(struct realtek_smi * smi,unsigned int port,unsigned int vid)192 int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
193 unsigned int vid)
194 {
195 struct rtl8366_vlan_mc vlanmc;
196 int mc;
197 int ret;
198
199 if (!smi->ops->is_vlan_valid(smi, vid))
200 return -EINVAL;
201
202 /* Find or allocate a member config for this VID */
203 ret = rtl8366_obtain_mc(smi, vid, &vlanmc);
204 if (ret < 0)
205 return ret;
206 mc = ret;
207
208 ret = smi->ops->set_mc_index(smi, port, mc);
209 if (ret) {
210 dev_err(smi->dev, "set PVID: failed to set MC index %d for port %d\n",
211 mc, port);
212 return ret;
213 }
214
215 dev_dbg(smi->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
216 port, vid, mc);
217
218 return 0;
219 }
220 EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
221
rtl8366_enable_vlan4k(struct realtek_smi * smi,bool enable)222 int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable)
223 {
224 int ret;
225
226 /* To enable 4k VLAN, ordinary VLAN must be enabled first,
227 * but if we disable 4k VLAN it is fine to leave ordinary
228 * VLAN enabled.
229 */
230 if (enable) {
231 /* Make sure VLAN is ON */
232 ret = smi->ops->enable_vlan(smi, true);
233 if (ret)
234 return ret;
235
236 smi->vlan_enabled = true;
237 }
238
239 ret = smi->ops->enable_vlan4k(smi, enable);
240 if (ret)
241 return ret;
242
243 smi->vlan4k_enabled = enable;
244 return 0;
245 }
246 EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);
247
rtl8366_enable_vlan(struct realtek_smi * smi,bool enable)248 int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable)
249 {
250 int ret;
251
252 ret = smi->ops->enable_vlan(smi, enable);
253 if (ret)
254 return ret;
255
256 smi->vlan_enabled = enable;
257
258 /* If we turn VLAN off, make sure that we turn off
259 * 4k VLAN as well, if that happened to be on.
260 */
261 if (!enable) {
262 smi->vlan4k_enabled = false;
263 ret = smi->ops->enable_vlan4k(smi, false);
264 }
265
266 return ret;
267 }
268 EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);
269
rtl8366_reset_vlan(struct realtek_smi * smi)270 int rtl8366_reset_vlan(struct realtek_smi *smi)
271 {
272 struct rtl8366_vlan_mc vlanmc;
273 int ret;
274 int i;
275
276 rtl8366_enable_vlan(smi, false);
277 rtl8366_enable_vlan4k(smi, false);
278
279 /* Clear the 16 VLAN member configurations */
280 vlanmc.vid = 0;
281 vlanmc.priority = 0;
282 vlanmc.member = 0;
283 vlanmc.untag = 0;
284 vlanmc.fid = 0;
285 for (i = 0; i < smi->num_vlan_mc; i++) {
286 ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
287 if (ret)
288 return ret;
289 }
290
291 return 0;
292 }
293 EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
294
rtl8366_init_vlan(struct realtek_smi * smi)295 int rtl8366_init_vlan(struct realtek_smi *smi)
296 {
297 int port;
298 int ret;
299
300 ret = rtl8366_reset_vlan(smi);
301 if (ret)
302 return ret;
303
304 /* Loop over the available ports, for each port, associate
305 * it with the VLAN (port+1)
306 */
307 for (port = 0; port < smi->num_ports; port++) {
308 u32 mask;
309
310 if (port == smi->cpu_port)
311 /* For the CPU port, make all ports members of this
312 * VLAN.
313 */
314 mask = GENMASK(smi->num_ports - 1, 0);
315 else
316 /* For all other ports, enable itself plus the
317 * CPU port.
318 */
319 mask = BIT(port) | BIT(smi->cpu_port);
320
321 /* For each port, set the port as member of VLAN (port+1)
322 * and untagged, except for the CPU port: the CPU port (5) is
323 * member of VLAN 6 and so are ALL the other ports as well.
324 * Use filter 0 (no filter).
325 */
326 dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
327 (port + 1), port, mask);
328 ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
329 if (ret)
330 return ret;
331
332 dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
333 (port + 1), port, (port + 1));
334 ret = rtl8366_set_pvid(smi, port, (port + 1));
335 if (ret)
336 return ret;
337 }
338
339 return rtl8366_enable_vlan(smi, true);
340 }
341 EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
342
rtl8366_vlan_filtering(struct dsa_switch * ds,int port,bool vlan_filtering)343 int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
344 {
345 struct realtek_smi *smi = ds->priv;
346 struct rtl8366_vlan_4k vlan4k;
347 int ret;
348
349 /* Use VLAN nr port + 1 since VLAN0 is not valid */
350 if (!smi->ops->is_vlan_valid(smi, port + 1))
351 return -EINVAL;
352
353 dev_info(smi->dev, "%s filtering on port %d\n",
354 vlan_filtering ? "enable" : "disable",
355 port);
356
357 /* TODO:
358 * The hardware support filter ID (FID) 0..7, I have no clue how to
359 * support this in the driver when the callback only says on/off.
360 */
361 ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
362 if (ret)
363 return ret;
364
365 /* Just set the filter to FID 1 for now then */
366 ret = rtl8366_set_vlan(smi, port + 1,
367 vlan4k.member,
368 vlan4k.untag,
369 1);
370 if (ret)
371 return ret;
372
373 return 0;
374 }
375 EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
376
rtl8366_vlan_prepare(struct dsa_switch * ds,int port,const struct switchdev_obj_port_vlan * vlan)377 int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
378 const struct switchdev_obj_port_vlan *vlan)
379 {
380 struct realtek_smi *smi = ds->priv;
381 u16 vid;
382 int ret;
383
384 for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
385 if (!smi->ops->is_vlan_valid(smi, vid))
386 return -EINVAL;
387
388 dev_info(smi->dev, "prepare VLANs %04x..%04x\n",
389 vlan->vid_begin, vlan->vid_end);
390
391 /* Enable VLAN in the hardware
392 * FIXME: what's with this 4k business?
393 * Just rtl8366_enable_vlan() seems inconclusive.
394 */
395 ret = rtl8366_enable_vlan4k(smi, true);
396 if (ret)
397 return ret;
398
399 return 0;
400 }
401 EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare);
402
rtl8366_vlan_add(struct dsa_switch * ds,int port,const struct switchdev_obj_port_vlan * vlan)403 void rtl8366_vlan_add(struct dsa_switch *ds, int port,
404 const struct switchdev_obj_port_vlan *vlan)
405 {
406 bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
407 bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
408 struct realtek_smi *smi = ds->priv;
409 u32 member = 0;
410 u32 untag = 0;
411 u16 vid;
412 int ret;
413
414 for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++)
415 if (!smi->ops->is_vlan_valid(smi, vid))
416 return;
417
418 dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
419 vlan->vid_begin,
420 port,
421 untagged ? "untagged" : "tagged",
422 pvid ? " PVID" : "no PVID");
423
424 if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
425 dev_err(smi->dev, "port is DSA or CPU port\n");
426
427 for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
428 member |= BIT(port);
429
430 if (untagged)
431 untag |= BIT(port);
432
433 ret = rtl8366_set_vlan(smi, vid, member, untag, 0);
434 if (ret)
435 dev_err(smi->dev,
436 "failed to set up VLAN %04x",
437 vid);
438
439 if (!pvid)
440 continue;
441
442 ret = rtl8366_set_pvid(smi, port, vid);
443 if (ret)
444 dev_err(smi->dev,
445 "failed to set PVID on port %d to VLAN %04x",
446 port, vid);
447
448 if (!ret)
449 dev_dbg(smi->dev, "VLAN add: added VLAN %d with PVID on port %d\n",
450 vid, port);
451 }
452 }
453 EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
454
rtl8366_vlan_del(struct dsa_switch * ds,int port,const struct switchdev_obj_port_vlan * vlan)455 int rtl8366_vlan_del(struct dsa_switch *ds, int port,
456 const struct switchdev_obj_port_vlan *vlan)
457 {
458 struct realtek_smi *smi = ds->priv;
459 u16 vid;
460 int ret;
461
462 dev_info(smi->dev, "del VLAN on port %d\n", port);
463
464 for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
465 int i;
466
467 dev_info(smi->dev, "del VLAN %04x\n", vid);
468
469 for (i = 0; i < smi->num_vlan_mc; i++) {
470 struct rtl8366_vlan_mc vlanmc;
471
472 ret = smi->ops->get_vlan_mc(smi, i, &vlanmc);
473 if (ret)
474 return ret;
475
476 if (vid == vlanmc.vid) {
477 /* Remove this port from the VLAN */
478 vlanmc.member &= ~BIT(port);
479 vlanmc.untag &= ~BIT(port);
480 /*
481 * If no ports are members of this VLAN
482 * anymore then clear the whole member
483 * config so it can be reused.
484 */
485 if (!vlanmc.member && vlanmc.untag) {
486 vlanmc.vid = 0;
487 vlanmc.priority = 0;
488 vlanmc.fid = 0;
489 }
490 ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
491 if (ret) {
492 dev_err(smi->dev,
493 "failed to remove VLAN %04x\n",
494 vid);
495 return ret;
496 }
497 break;
498 }
499 }
500 }
501
502 return 0;
503 }
504 EXPORT_SYMBOL_GPL(rtl8366_vlan_del);
505
rtl8366_get_strings(struct dsa_switch * ds,int port,u32 stringset,uint8_t * data)506 void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
507 uint8_t *data)
508 {
509 struct realtek_smi *smi = ds->priv;
510 struct rtl8366_mib_counter *mib;
511 int i;
512
513 if (port >= smi->num_ports)
514 return;
515
516 for (i = 0; i < smi->num_mib_counters; i++) {
517 mib = &smi->mib_counters[i];
518 strncpy(data + i * ETH_GSTRING_LEN,
519 mib->name, ETH_GSTRING_LEN);
520 }
521 }
522 EXPORT_SYMBOL_GPL(rtl8366_get_strings);
523
rtl8366_get_sset_count(struct dsa_switch * ds,int port,int sset)524 int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
525 {
526 struct realtek_smi *smi = ds->priv;
527
528 /* We only support SS_STATS */
529 if (sset != ETH_SS_STATS)
530 return 0;
531 if (port >= smi->num_ports)
532 return -EINVAL;
533
534 return smi->num_mib_counters;
535 }
536 EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);
537
rtl8366_get_ethtool_stats(struct dsa_switch * ds,int port,uint64_t * data)538 void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
539 {
540 struct realtek_smi *smi = ds->priv;
541 int i;
542 int ret;
543
544 if (port >= smi->num_ports)
545 return;
546
547 for (i = 0; i < smi->num_mib_counters; i++) {
548 struct rtl8366_mib_counter *mib;
549 u64 mibvalue = 0;
550
551 mib = &smi->mib_counters[i];
552 ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue);
553 if (ret) {
554 dev_err(smi->dev, "error reading MIB counter %s\n",
555 mib->name);
556 }
557 data[i] = mibvalue;
558 }
559 }
560 EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);
561