1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
4 *
5 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
7 *
8 * A lot of code borrowed from the Linux xHCI driver.
9 */
10
11 #include <linux/clk.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/of.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/usb/phy.h>
19 #include <linux/slab.h>
20 #include <linux/acpi.h>
21
22 #include "xhci.h"
23 #include "xhci-plat.h"
24 #include "xhci-mvebu.h"
25 #include "xhci-rcar.h"
26
27 static struct hc_driver __read_mostly xhci_plat_hc_driver;
28
29 static int xhci_plat_setup(struct usb_hcd *hcd);
30 static int xhci_plat_start(struct usb_hcd *hcd);
31
32 static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
33 .extra_priv_size = sizeof(struct xhci_plat_priv),
34 .reset = xhci_plat_setup,
35 .start = xhci_plat_start,
36 };
37
xhci_priv_plat_start(struct usb_hcd * hcd)38 static void xhci_priv_plat_start(struct usb_hcd *hcd)
39 {
40 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
41
42 if (priv->plat_start)
43 priv->plat_start(hcd);
44 }
45
xhci_priv_init_quirk(struct usb_hcd * hcd)46 static int xhci_priv_init_quirk(struct usb_hcd *hcd)
47 {
48 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
49
50 if (!priv->init_quirk)
51 return 0;
52
53 return priv->init_quirk(hcd);
54 }
55
xhci_priv_resume_quirk(struct usb_hcd * hcd)56 static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
57 {
58 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
59
60 if (!priv->resume_quirk)
61 return 0;
62
63 return priv->resume_quirk(hcd);
64 }
65
xhci_plat_quirks(struct device * dev,struct xhci_hcd * xhci)66 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
67 {
68 /*
69 * As of now platform drivers don't provide MSI support so we ensure
70 * here that the generic code does not try to make a pci_dev from our
71 * dev struct in order to setup MSI
72 */
73 xhci->quirks |= XHCI_PLAT;
74 }
75
76 /* called during probe() after chip reset completes */
xhci_plat_setup(struct usb_hcd * hcd)77 static int xhci_plat_setup(struct usb_hcd *hcd)
78 {
79 int ret;
80
81
82 ret = xhci_priv_init_quirk(hcd);
83 if (ret)
84 return ret;
85
86 return xhci_gen_setup(hcd, xhci_plat_quirks);
87 }
88
xhci_plat_start(struct usb_hcd * hcd)89 static int xhci_plat_start(struct usb_hcd *hcd)
90 {
91 xhci_priv_plat_start(hcd);
92 return xhci_run(hcd);
93 }
94
95 #ifdef CONFIG_OF
96 static const struct xhci_plat_priv xhci_plat_marvell_armada = {
97 .init_quirk = xhci_mvebu_mbus_init_quirk,
98 };
99
100 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
101 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
102 .init_quirk = xhci_rcar_init_quirk,
103 .plat_start = xhci_rcar_start,
104 .resume_quirk = xhci_rcar_resume_quirk,
105 };
106
107 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
108 .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3,
109 .init_quirk = xhci_rcar_init_quirk,
110 .plat_start = xhci_rcar_start,
111 .resume_quirk = xhci_rcar_resume_quirk,
112 };
113
114 static const struct of_device_id usb_xhci_of_match[] = {
115 {
116 .compatible = "generic-xhci",
117 }, {
118 .compatible = "xhci-platform",
119 }, {
120 .compatible = "marvell,armada-375-xhci",
121 .data = &xhci_plat_marvell_armada,
122 }, {
123 .compatible = "marvell,armada-380-xhci",
124 .data = &xhci_plat_marvell_armada,
125 }, {
126 .compatible = "renesas,xhci-r8a7790",
127 .data = &xhci_plat_renesas_rcar_gen2,
128 }, {
129 .compatible = "renesas,xhci-r8a7791",
130 .data = &xhci_plat_renesas_rcar_gen2,
131 }, {
132 .compatible = "renesas,xhci-r8a7793",
133 .data = &xhci_plat_renesas_rcar_gen2,
134 }, {
135 .compatible = "renesas,xhci-r8a7795",
136 .data = &xhci_plat_renesas_rcar_gen3,
137 }, {
138 .compatible = "renesas,xhci-r8a7796",
139 .data = &xhci_plat_renesas_rcar_gen3,
140 }, {
141 .compatible = "renesas,rcar-gen2-xhci",
142 .data = &xhci_plat_renesas_rcar_gen2,
143 }, {
144 .compatible = "renesas,rcar-gen3-xhci",
145 .data = &xhci_plat_renesas_rcar_gen3,
146 },
147 {},
148 };
149 MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
150 #endif
151
xhci_plat_probe(struct platform_device * pdev)152 static int xhci_plat_probe(struct platform_device *pdev)
153 {
154 const struct xhci_plat_priv *priv_match;
155 const struct hc_driver *driver;
156 struct device *sysdev, *tmpdev;
157 struct xhci_hcd *xhci;
158 struct resource *res;
159 struct usb_hcd *hcd;
160 struct clk *clk;
161 struct clk *reg_clk;
162 int ret;
163 int irq;
164
165 if (usb_disabled())
166 return -ENODEV;
167
168 driver = &xhci_plat_hc_driver;
169
170 irq = platform_get_irq(pdev, 0);
171 if (irq < 0)
172 return irq;
173
174 /*
175 * sysdev must point to a device that is known to the system firmware
176 * or PCI hardware. We handle these three cases here:
177 * 1. xhci_plat comes from firmware
178 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
179 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
180 */
181 for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
182 if (is_of_node(sysdev->fwnode) ||
183 is_acpi_device_node(sysdev->fwnode))
184 break;
185 #ifdef CONFIG_PCI
186 else if (sysdev->bus == &pci_bus_type)
187 break;
188 #endif
189 }
190
191 if (!sysdev)
192 sysdev = &pdev->dev;
193
194 /* Try to set 64-bit DMA first */
195 if (WARN_ON(!sysdev->dma_mask))
196 /* Platform did not initialize dma_mask */
197 ret = dma_coerce_mask_and_coherent(sysdev,
198 DMA_BIT_MASK(64));
199 else
200 ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
201
202 /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
203 if (ret) {
204 ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
205 if (ret)
206 return ret;
207 }
208
209 pm_runtime_set_active(&pdev->dev);
210 pm_runtime_enable(&pdev->dev);
211 pm_runtime_get_noresume(&pdev->dev);
212
213 hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
214 dev_name(&pdev->dev), NULL);
215 if (!hcd) {
216 ret = -ENOMEM;
217 goto disable_runtime;
218 }
219
220 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
221 hcd->regs = devm_ioremap_resource(&pdev->dev, res);
222 if (IS_ERR(hcd->regs)) {
223 ret = PTR_ERR(hcd->regs);
224 goto put_hcd;
225 }
226
227 hcd->rsrc_start = res->start;
228 hcd->rsrc_len = resource_size(res);
229
230 /*
231 * Not all platforms have clks so it is not an error if the
232 * clock do not exist.
233 */
234 reg_clk = devm_clk_get(&pdev->dev, "reg");
235 if (!IS_ERR(reg_clk)) {
236 ret = clk_prepare_enable(reg_clk);
237 if (ret)
238 goto put_hcd;
239 } else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) {
240 ret = -EPROBE_DEFER;
241 goto put_hcd;
242 }
243
244 clk = devm_clk_get(&pdev->dev, NULL);
245 if (!IS_ERR(clk)) {
246 ret = clk_prepare_enable(clk);
247 if (ret)
248 goto disable_reg_clk;
249 } else if (PTR_ERR(clk) == -EPROBE_DEFER) {
250 ret = -EPROBE_DEFER;
251 goto disable_reg_clk;
252 }
253
254 xhci = hcd_to_xhci(hcd);
255 priv_match = of_device_get_match_data(&pdev->dev);
256 if (priv_match) {
257 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
258
259 /* Just copy data for now */
260 if (priv_match)
261 *priv = *priv_match;
262 }
263
264 device_wakeup_enable(hcd->self.controller);
265
266 xhci->clk = clk;
267 xhci->reg_clk = reg_clk;
268 xhci->main_hcd = hcd;
269 xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
270 dev_name(&pdev->dev), hcd);
271 if (!xhci->shared_hcd) {
272 ret = -ENOMEM;
273 goto disable_clk;
274 }
275
276 /* imod_interval is the interrupt moderation value in nanoseconds. */
277 xhci->imod_interval = 40000;
278
279 /* Iterate over all parent nodes for finding quirks */
280 for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
281
282 if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
283 xhci->quirks |= XHCI_HW_LPM_DISABLE;
284
285 if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
286 xhci->quirks |= XHCI_LPM_SUPPORT;
287
288 if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
289 xhci->quirks |= XHCI_BROKEN_PORT_PED;
290
291 device_property_read_u32(tmpdev, "imod-interval-ns",
292 &xhci->imod_interval);
293 }
294
295 hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
296 if (IS_ERR(hcd->usb_phy)) {
297 ret = PTR_ERR(hcd->usb_phy);
298 if (ret == -EPROBE_DEFER)
299 goto put_usb3_hcd;
300 hcd->usb_phy = NULL;
301 } else {
302 ret = usb_phy_init(hcd->usb_phy);
303 if (ret)
304 goto put_usb3_hcd;
305 hcd->skip_phy_initialization = 1;
306 }
307
308 ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
309 if (ret)
310 goto disable_usb_phy;
311
312 if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
313 xhci->shared_hcd->can_do_streams = 1;
314
315 ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
316 if (ret)
317 goto dealloc_usb2_hcd;
318
319 device_enable_async_suspend(&pdev->dev);
320 pm_runtime_put_noidle(&pdev->dev);
321
322 /*
323 * Prevent runtime pm from being on as default, users should enable
324 * runtime pm using power/control in sysfs.
325 */
326 pm_runtime_forbid(&pdev->dev);
327
328 return 0;
329
330
331 dealloc_usb2_hcd:
332 usb_remove_hcd(hcd);
333
334 disable_usb_phy:
335 usb_phy_shutdown(hcd->usb_phy);
336
337 put_usb3_hcd:
338 usb_put_hcd(xhci->shared_hcd);
339
340 disable_clk:
341 clk_disable_unprepare(clk);
342
343 disable_reg_clk:
344 clk_disable_unprepare(reg_clk);
345
346 put_hcd:
347 usb_put_hcd(hcd);
348
349 disable_runtime:
350 pm_runtime_put_noidle(&pdev->dev);
351 pm_runtime_disable(&pdev->dev);
352
353 return ret;
354 }
355
xhci_plat_remove(struct platform_device * dev)356 static int xhci_plat_remove(struct platform_device *dev)
357 {
358 struct usb_hcd *hcd = platform_get_drvdata(dev);
359 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
360 struct clk *clk = xhci->clk;
361 struct clk *reg_clk = xhci->reg_clk;
362 struct usb_hcd *shared_hcd = xhci->shared_hcd;
363
364 pm_runtime_get_sync(&dev->dev);
365 xhci->xhc_state |= XHCI_STATE_REMOVING;
366
367 usb_remove_hcd(shared_hcd);
368 xhci->shared_hcd = NULL;
369 usb_phy_shutdown(hcd->usb_phy);
370
371 usb_remove_hcd(hcd);
372 usb_put_hcd(shared_hcd);
373
374 clk_disable_unprepare(clk);
375 clk_disable_unprepare(reg_clk);
376 usb_put_hcd(hcd);
377
378 pm_runtime_disable(&dev->dev);
379 pm_runtime_put_noidle(&dev->dev);
380 pm_runtime_set_suspended(&dev->dev);
381
382 return 0;
383 }
384
xhci_plat_suspend(struct device * dev)385 static int __maybe_unused xhci_plat_suspend(struct device *dev)
386 {
387 struct usb_hcd *hcd = dev_get_drvdata(dev);
388 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
389
390 /*
391 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
392 * to do wakeup during suspend. Since xhci_plat_suspend is currently
393 * only designed for system suspend, device_may_wakeup() is enough
394 * to dertermine whether host is allowed to do wakeup. Need to
395 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
396 * also applies to runtime suspend.
397 */
398 return xhci_suspend(xhci, device_may_wakeup(dev));
399 }
400
xhci_plat_resume(struct device * dev)401 static int __maybe_unused xhci_plat_resume(struct device *dev)
402 {
403 struct usb_hcd *hcd = dev_get_drvdata(dev);
404 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
405 int ret;
406
407 ret = xhci_priv_resume_quirk(hcd);
408 if (ret)
409 return ret;
410
411 return xhci_resume(xhci, 0);
412 }
413
xhci_plat_runtime_suspend(struct device * dev)414 static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
415 {
416 struct usb_hcd *hcd = dev_get_drvdata(dev);
417 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
418
419 return xhci_suspend(xhci, true);
420 }
421
xhci_plat_runtime_resume(struct device * dev)422 static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
423 {
424 struct usb_hcd *hcd = dev_get_drvdata(dev);
425 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
426
427 return xhci_resume(xhci, 0);
428 }
429
430 static const struct dev_pm_ops xhci_plat_pm_ops = {
431 SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
432
433 SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
434 xhci_plat_runtime_resume,
435 NULL)
436 };
437
438 static const struct acpi_device_id usb_xhci_acpi_match[] = {
439 /* XHCI-compliant USB Controller */
440 { "PNP0D10", },
441 { }
442 };
443 MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
444
445 static struct platform_driver usb_xhci_driver = {
446 .probe = xhci_plat_probe,
447 .remove = xhci_plat_remove,
448 .shutdown = usb_hcd_platform_shutdown,
449 .driver = {
450 .name = "xhci-hcd",
451 .pm = &xhci_plat_pm_ops,
452 .of_match_table = of_match_ptr(usb_xhci_of_match),
453 .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
454 },
455 };
456 MODULE_ALIAS("platform:xhci-hcd");
457
xhci_plat_init(void)458 static int __init xhci_plat_init(void)
459 {
460 xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
461 return platform_driver_register(&usb_xhci_driver);
462 }
463 module_init(xhci_plat_init);
464
xhci_plat_exit(void)465 static void __exit xhci_plat_exit(void)
466 {
467 platform_driver_unregister(&usb_xhci_driver);
468 }
469 module_exit(xhci_plat_exit);
470
471 MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
472 MODULE_LICENSE("GPL");
473