1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2006-2008 4 * Texas Instruments. 5 * Richard Woodruff <r-woodruff2@ti.com> 6 * Syed Mohammed Khasim <x0khasim@ti.com> 7 * 8 * (C) Copyright 2009 9 * Frederik Kriewitz <frederik@kriewitz.eu> 10 * 11 * Configuration settings for the DevKit8000 board. 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 /* High Level Configuration Options */ 18 #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 19 20 /* 21 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 22 * 64 bytes before this address should be set aside for u-boot.img's 23 * header. That is 0x800FFFC0--0x80100000 should not be used for any 24 * other needs. 25 */ 26 27 #define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ 28 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 29 30 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 31 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ 32 33 /* Physical Memory Map */ 34 35 #include <configs/ti_omap3_common.h> 36 37 #define CONFIG_REVISION_TAG 1 38 39 /* Size of malloc() pool */ 40 #undef CONFIG_SYS_MALLOC_LEN 41 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 42 43 /* Hardware drivers */ 44 /* DM9000 */ 45 #define CONFIG_NET_RETRY_COUNT 20 46 #define CONFIG_DRIVER_DM9000 1 47 #define CONFIG_DM9000_BASE 0x2c000000 48 #define DM9000_IO CONFIG_DM9000_BASE 49 #define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) 50 #define CONFIG_DM9000_USE_16BIT 1 51 #define CONFIG_DM9000_NO_SROM 1 52 #undef CONFIG_DM9000_DEBUG 53 54 /* TWL4030 */ 55 56 /* Board NAND Info */ 57 #define CONFIG_JFFS2_NAND 58 /* nand device jffs2 lives on */ 59 #define CONFIG_JFFS2_DEV "nand0" 60 /* start of jffs2 partition */ 61 #define CONFIG_JFFS2_PART_OFFSET 0x680000 62 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ 63 /* partition */ 64 65 /* BOOTP/DHCP options */ 66 #define CONFIG_BOOTP_NISDOMAIN 67 #define CONFIG_BOOTP_BOOTFILESIZE 68 #define CONFIG_BOOTP_DNS2 69 #define CONFIG_BOOTP_SEND_HOSTNAME 70 #define CONFIG_BOOTP_TIMEOFFSET 71 #undef CONFIG_BOOTP_VENDOREX 72 73 /* Environment information */ 74 #define CONFIG_EXTRA_ENV_SETTINGS \ 75 "loadaddr=0x82000000\0" \ 76 "console=ttyO2,115200n8\0" \ 77 "mmcdev=0\0" \ 78 "vram=12M\0" \ 79 "dvimode=1024x768MR-16@60\0" \ 80 "defaultdisplay=dvi\0" \ 81 "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ 82 "kernelopts=rw\0" \ 83 "commonargs=" \ 84 "setenv bootargs console=${console} " \ 85 "vram=${vram} " \ 86 "omapfb.mode=dvi:${dvimode} " \ 87 "omapdss.def_disp=${defaultdisplay}\0" \ 88 "mmcargs=" \ 89 "run commonargs; " \ 90 "setenv bootargs ${bootargs} " \ 91 "root=/dev/mmcblk0p2 " \ 92 "rootwait " \ 93 "${kernelopts}\0" \ 94 "nandargs=" \ 95 "run commonargs; " \ 96 "setenv bootargs ${bootargs} " \ 97 "omapfb.mode=dvi:${dvimode} " \ 98 "omapdss.def_disp=${defaultdisplay} " \ 99 "root=/dev/mtdblock4 " \ 100 "rootfstype=jffs2 " \ 101 "${kernelopts}\0" \ 102 "netargs=" \ 103 "run commonargs; " \ 104 "setenv bootargs ${bootargs} " \ 105 "root=/dev/nfs " \ 106 "nfsroot=${serverip}:${rootpath},${nfsopts} " \ 107 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ 108 "${kernelopts} " \ 109 "dnsip1=${dnsip} " \ 110 "dnsip2=${dnsip2}\0" \ 111 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 112 "bootscript=echo Running bootscript from mmc ...; " \ 113 "source ${loadaddr}\0" \ 114 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 115 "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ 116 "mmcboot=echo Booting from mmc ...; " \ 117 "run mmcargs; " \ 118 "bootm ${loadaddr}\0" \ 119 "nandboot=echo Booting from nand ...; " \ 120 "run nandargs; " \ 121 "nand read ${loadaddr} 280000 400000; " \ 122 "bootm ${loadaddr}\0" \ 123 "netboot=echo Booting from network ...; " \ 124 "dhcp ${loadaddr}; " \ 125 "run netargs; " \ 126 "bootm ${loadaddr}\0" \ 127 "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ 128 "if run loadbootscript; then " \ 129 "run bootscript; " \ 130 "else " \ 131 "if run loaduimage; then " \ 132 "run mmcboot; " \ 133 "else run nandboot; " \ 134 "fi; " \ 135 "fi; " \ 136 "else run nandboot; fi\0" 137 138 #define CONFIG_BOOTCOMMAND "run autoboot" 139 140 /* Boot Argument Buffer Size */ 141 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) 142 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ 143 0x01000000) /* 16MB */ 144 145 /* SRAM config */ 146 #define CONFIG_SYS_SRAM_START 0x40200000 147 #define CONFIG_SYS_SRAM_SIZE 0x10000 148 149 /* Defines for SPL */ 150 151 /* NAND boot config */ 152 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 153 #define CONFIG_SYS_NAND_PAGE_COUNT 64 154 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 155 #define CONFIG_SYS_NAND_OOBSIZE 64 156 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 157 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 158 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 159 10, 11, 12, 13} 160 161 #define CONFIG_SYS_NAND_ECCSIZE 512 162 #define CONFIG_SYS_NAND_ECCBYTES 3 163 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 164 165 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 166 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 167 168 /* SPL OS boot options */ 169 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 170 171 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 172 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 173 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 174 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */ 175 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ 176 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ 177 178 #undef CONFIG_SYS_SPL_ARGS_ADDR 179 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) 180 181 #endif /* __CONFIG_H */ 182