1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * pdu001.h 4 * 5 * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ 6 * 7 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 8 */ 9 10 #ifndef __CONFIG_PDU001_H 11 #define __CONFIG_PDU001_H 12 13 #include <configs/ti_am335x_common.h> 14 15 /* Using 32K of volatile storage for environment */ 16 17 #define MACH_TYPE_PDU001 5075 18 #define CONFIG_MACH_TYPE MACH_TYPE_PDU001 19 #define CONFIG_BOARD_LATE_INIT 20 21 /* Clock Defines */ 22 #define V_OSCK 24000000 /* Clock output from T2 */ 23 #define V_SCLK (V_OSCK) 24 25 #if CONFIG_CONS_INDEX == 1 26 #define CONSOLE_DEV "ttyO0" 27 #elif CONFIG_CONS_INDEX == 2 28 #define CONSOLE_DEV "ttyO1" 29 #elif CONFIG_CONS_INDEX == 3 30 #define CONSOLE_DEV "ttyO2" 31 #elif CONFIG_CONS_INDEX == 4 32 #define CONSOLE_DEV "ttyO3" 33 #elif CONFIG_CONS_INDEX == 5 34 #define CONSOLE_DEV "ttyO4" 35 #elif CONFIG_CONS_INDEX == 6 36 #define CONSOLE_DEV "ttyO5" 37 #endif 38 39 #define CONFIG_BOOTCOMMAND \ 40 "run eval_boot_device;" \ 41 "setenv bootargs console=${console} " \ 42 "vt.global_cursor_default=0 " \ 43 "root=/dev/mmcblk${mmc_boot}p${root_fs_partition} " \ 44 "rootfstype=ext4 " \ 45 "rootwait " \ 46 "rootdelay=1;" \ 47 "fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};" \ 48 "fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};" \ 49 "bootz ${loadaddr} - ${fdtaddr}" 50 51 #ifndef CONFIG_SPL_BUILD 52 #define CONFIG_EXTRA_ENV_SETTINGS \ 53 DEFAULT_LINUX_BOOT_ENV \ 54 "fdtfile=am335x-pdu001.dtb\0" \ 55 "bootfile=zImage\0" \ 56 "console=" CONSOLE_DEV ",115200n8\0" \ 57 "root_fs_partition=2\0" \ 58 "eval_boot_device=" \ 59 "if test $boot_device = emmc; then " \ 60 "setenv mmc_boot 0;" \ 61 "elif test $boot_device = sdcard; then " \ 62 "setenv mmc_boot 1;" \ 63 "else " \ 64 "echo Bootdevice is neither MMC0 nor MMC1;" \ 65 "reset;" \ 66 "fi;" \ 67 "\0" 68 #endif 69 70 /* NS16550 Configuration */ 71 #define CONFIG_SYS_NS16550_COM1 UART0_BASE 72 #define CONFIG_SYS_NS16550_COM2 UART1_BASE 73 #define CONFIG_SYS_NS16550_COM3 UART2_BASE 74 #define CONFIG_SYS_NS16550_COM4 UART3_BASE 75 #define CONFIG_SYS_NS16550_COM5 UART4_BASE 76 #define CONFIG_SYS_NS16550_COM6 UART5_BASE 77 #define CONFIG_BAUDRATE 115200 78 79 #endif /* ! __CONFIG_PDU001_H */ 80