• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
2
3This document defines the binding for a component that loads and boots firmware
4on the Qualcomm Technology Inc. Hexagon v56 core.
5
6- compatible:
7	Usage: required
8	Value type: <string>
9	Definition: must be one of:
10		    "qcom,qcs404-cdsp-pil",
11		    "qcom,sdm845-adsp-pil"
12
13- reg:
14	Usage: required
15	Value type: <prop-encoded-array>
16	Definition: must specify the base address and size of the qdsp6ss register
17
18- interrupts-extended:
19	Usage: required
20	Value type: <prop-encoded-array>
21	Definition: must list the watchdog, fatal IRQs ready, handover and
22		    stop-ack IRQs
23
24- interrupt-names:
25	Usage: required
26	Value type: <stringlist>
27	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
28
29- clocks:
30	Usage: required
31	Value type: <prop-encoded-array>
32	Definition:  List of phandles and clock specifier pairs for the Hexagon,
33		     per clock-names below.
34
35- clock-names:
36	Usage: required for SDM845 ADSP
37	Value type: <stringlist>
38	Definition: List of clock input name strings sorted in the same
39		    order as the clocks property. Definition must have
40		    "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
41		    "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
42		    and "qdsp6ss_core".
43
44- clock-names:
45	Usage: required for QCS404 CDSP
46	Value type: <stringlist>
47	Definition: List of clock input name strings sorted in the same
48		    order as the clocks property. Definition must have
49		    "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
50		    "q6ss_master", "q6_axim".
51
52- power-domains:
53	Usage: required
54	Value type: <phandle>
55	Definition: reference to cx power domain node.
56
57- resets:
58	Usage: required
59	Value type: <phandle>
60	Definition: reference to the list of resets for the Hexagon.
61
62- reset-names:
63        Usage: required for SDM845 ADSP
64        Value type: <stringlist>
65        Definition: must be "pdc_sync" and "cc_lpass"
66
67- reset-names:
68        Usage: required for QCS404 CDSP
69        Value type: <stringlist>
70        Definition: must be "restart"
71
72- qcom,halt-regs:
73	Usage: required
74	Value type: <prop-encoded-array>
75	Definition: a phandle reference to a syscon representing TCSR followed
76		    by the offset within syscon for Hexagon halt register.
77
78- memory-region:
79	Usage: required
80	Value type: <phandle>
81	Definition: reference to the reserved-memory for the firmware
82
83- qcom,smem-states:
84	Usage: required
85	Value type: <phandle>
86	Definition: reference to the smem state for requesting the Hexagon to
87		    shut down
88
89- qcom,smem-state-names:
90	Usage: required
91	Value type: <stringlist>
92	Definition: must be "stop"
93
94
95= SUBNODES
96The adsp node may have an subnode named "glink-edge" that describes the
97communication edge, channels and devices related to the Hexagon.
98See ../soc/qcom/qcom,glink.txt for details on how to describe these.
99
100= EXAMPLE
101The following example describes the resources needed to boot control the
102ADSP, as it is found on SDM845 boards.
103
104	remoteproc@17300000 {
105		compatible = "qcom,sdm845-adsp-pil";
106		reg = <0x17300000 0x40c>;
107
108		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
109			<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
110			<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
111			<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
112			<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
113		interrupt-names = "wdog", "fatal", "ready",
114			"handover", "stop-ack";
115
116		clocks = <&rpmhcc RPMH_CXO_CLK>,
117			<&gcc GCC_LPASS_SWAY_CLK>,
118			<&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
119			<&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
120			<&lpasscc LPASS_QDSP6SS_XO_CLK>,
121			<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
122			<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
123		clock-names = "xo", "sway_cbcr",
124			"lpass_ahbs_aon_cbcr",
125			"lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
126			"qdsp6ss_sleep", "qdsp6ss_core";
127
128		power-domains = <&rpmhpd SDM845_CX>;
129
130		resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
131			 <&aoss_reset AOSS_CC_LPASS_RESTART>;
132		reset-names = "pdc_sync", "cc_lpass";
133
134		qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
135
136		memory-region = <&pil_adsp_mem>;
137
138		qcom,smem-states = <&adsp_smp2p_out 0>;
139		qcom,smem-state-names = "stop";
140	};
141