1// SPDX-License-Identifier: GPL-2.0 2#include "qcom-apq8064-v2.0.dtsi" 3#include <dt-bindings/gpio/gpio.h> 4#include <dt-bindings/input/input.h> 5#include <dt-bindings/mfd/qcom-rpm.h> 6#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 7 8/ { 9 model = "Sony Xperia Z"; 10 compatible = "sony,xperia-yuga", "qcom,apq8064"; 11 12 aliases { 13 serial0 = &gsbi5_serial; 14 }; 15 16 chosen { 17 stdout-path = "serial0:115200n8"; 18 }; 19 20 gpio-keys { 21 compatible = "gpio-keys"; 22 input-name = "gpio-keys"; 23 24 pinctrl-names = "default"; 25 pinctrl-0 = <&gpio_keys_pin_a>; 26 27 camera-focus { 28 label = "camera_focus"; 29 gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; 30 linux,input-type = <1>; 31 linux,code = <KEY_CAMERA_FOCUS>; 32 }; 33 34 camera-snapshot { 35 label = "camera_snapshot"; 36 gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; 37 linux,input-type = <1>; 38 linux,code = <KEY_CAMERA>; 39 }; 40 41 volume-down { 42 label = "volume_down"; 43 gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; 44 linux,input-type = <1>; 45 linux,code = <KEY_VOLUMEDOWN>; 46 }; 47 48 volume-up { 49 label = "volume_up"; 50 gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; 51 linux,input-type = <1>; 52 linux,code = <KEY_VOLUMEUP>; 53 }; 54 }; 55 56 soc { 57 pinctrl@800000 { 58 gsbi5_uart_pin_a: gsbi5-uart-pin-active { 59 rx { 60 pins = "gpio52"; 61 function = "gsbi5"; 62 drive-strength = <2>; 63 bias-pull-up; 64 }; 65 66 tx { 67 pins = "gpio51"; 68 function = "gsbi5"; 69 drive-strength = <4>; 70 bias-disable; 71 }; 72 }; 73 74 75 sdcc3_cd_pin_a: sdcc3-cd-pin-active { 76 pins = "gpio26"; 77 function = "gpio"; 78 79 drive-strength = <2>; 80 bias-disable; 81 }; 82 }; 83 84 85 rpm@108000 { 86 regulators { 87 vin_l1_l2_l12_l18-supply = <&pm8921_s4>; 88 vin_lvs_1_3_6-supply = <&pm8921_s4>; 89 vin_lvs_4_5_7-supply = <&pm8921_s4>; 90 vin_ncp-supply = <&pm8921_l6>; 91 vin_lvs2-supply = <&pm8921_s4>; 92 vin_l24-supply = <&pm8921_s1>; 93 vin_l25-supply = <&pm8921_s1>; 94 vin_l27-supply = <&pm8921_s7>; 95 vin_l28-supply = <&pm8921_s7>; 96 97 /* Buck SMPS */ 98 s1 { 99 regulator-always-on; 100 regulator-min-microvolt = <1225000>; 101 regulator-max-microvolt = <1225000>; 102 qcom,switch-mode-frequency = <3200000>; 103 bias-pull-down; 104 }; 105 106 s2 { 107 regulator-min-microvolt = <1300000>; 108 regulator-max-microvolt = <1300000>; 109 qcom,switch-mode-frequency = <1600000>; 110 bias-pull-down; 111 }; 112 113 s3 { 114 regulator-min-microvolt = <500000>; 115 regulator-max-microvolt = <1150000>; 116 qcom,switch-mode-frequency = <4800000>; 117 bias-pull-down; 118 }; 119 120 s4 { 121 regulator-always-on; 122 regulator-min-microvolt = <1800000>; 123 regulator-max-microvolt = <1800000>; 124 qcom,switch-mode-frequency = <1600000>; 125 bias-pull-down; 126 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; 127 }; 128 129 s7 { 130 regulator-min-microvolt = <1300000>; 131 regulator-max-microvolt = <1300000>; 132 qcom,switch-mode-frequency = <3200000>; 133 }; 134 135 s8 { 136 regulator-min-microvolt = <2200000>; 137 regulator-max-microvolt = <2200000>; 138 qcom,switch-mode-frequency = <1600000>; 139 }; 140 141 /* PMOS LDO */ 142 l1 { 143 regulator-always-on; 144 regulator-min-microvolt = <1100000>; 145 regulator-max-microvolt = <1100000>; 146 bias-pull-down; 147 }; 148 149 l2 { 150 regulator-min-microvolt = <1200000>; 151 regulator-max-microvolt = <1200000>; 152 bias-pull-down; 153 }; 154 155 l3 { 156 regulator-min-microvolt = <3075000>; 157 regulator-max-microvolt = <3075000>; 158 bias-pull-down; 159 }; 160 161 l4 { 162 regulator-always-on; 163 regulator-min-microvolt = <1800000>; 164 regulator-max-microvolt = <1800000>; 165 bias-pull-down; 166 }; 167 168 l5 { 169 regulator-min-microvolt = <2950000>; 170 regulator-max-microvolt = <2950000>; 171 bias-pull-down; 172 }; 173 174 l6 { 175 regulator-min-microvolt = <2950000>; 176 regulator-max-microvolt = <2950000>; 177 bias-pull-down; 178 }; 179 180 l7 { 181 regulator-min-microvolt = <1850000>; 182 regulator-max-microvolt = <2950000>; 183 bias-pull-down; 184 }; 185 186 l8 { 187 regulator-min-microvolt = <2800000>; 188 regulator-max-microvolt = <2800000>; 189 bias-pull-down; 190 }; 191 192 l9 { 193 regulator-min-microvolt = <3000000>; 194 regulator-max-microvolt = <3000000>; 195 bias-pull-down; 196 }; 197 198 l10 { 199 regulator-min-microvolt = <2900000>; 200 regulator-max-microvolt = <2900000>; 201 bias-pull-down; 202 }; 203 204 l11 { 205 regulator-min-microvolt = <3000000>; 206 regulator-max-microvolt = <3000000>; 207 bias-pull-down; 208 }; 209 210 l12 { 211 regulator-min-microvolt = <1200000>; 212 regulator-max-microvolt = <1200000>; 213 bias-pull-down; 214 }; 215 216 l14 { 217 regulator-min-microvolt = <1800000>; 218 regulator-max-microvolt = <1800000>; 219 bias-pull-down; 220 }; 221 222 l15 { 223 regulator-min-microvolt = <1800000>; 224 regulator-max-microvolt = <2950000>; 225 bias-pull-down; 226 }; 227 228 l16 { 229 regulator-min-microvolt = <2800000>; 230 regulator-max-microvolt = <2800000>; 231 bias-pull-down; 232 }; 233 234 l17 { 235 regulator-min-microvolt = <2000000>; 236 regulator-max-microvolt = <2000000>; 237 bias-pull-down; 238 }; 239 240 l18 { 241 regulator-min-microvolt = <1200000>; 242 regulator-max-microvolt = <1200000>; 243 bias-pull-down; 244 }; 245 246 l21 { 247 regulator-min-microvolt = <1050000>; 248 regulator-max-microvolt = <1050000>; 249 bias-pull-down; 250 }; 251 252 l22 { 253 regulator-min-microvolt = <2600000>; 254 regulator-max-microvolt = <2600000>; 255 bias-pull-down; 256 }; 257 258 l23 { 259 regulator-min-microvolt = <1800000>; 260 regulator-max-microvolt = <1800000>; 261 bias-pull-down; 262 }; 263 264 l24 { 265 regulator-min-microvolt = <750000>; 266 regulator-max-microvolt = <1150000>; 267 bias-pull-down; 268 }; 269 270 l25 { 271 regulator-always-on; 272 regulator-min-microvolt = <1250000>; 273 regulator-max-microvolt = <1250000>; 274 bias-pull-down; 275 }; 276 277 l27 { 278 regulator-min-microvolt = <1100000>; 279 regulator-max-microvolt = <1100000>; 280 }; 281 282 l28 { 283 regulator-min-microvolt = <1050000>; 284 regulator-max-microvolt = <1050000>; 285 bias-pull-down; 286 }; 287 288 l29 { 289 regulator-min-microvolt = <2000000>; 290 regulator-max-microvolt = <2000000>; 291 bias-pull-down; 292 }; 293 294 /* Low Voltage Switch */ 295 lvs1 { 296 bias-pull-down; 297 }; 298 299 lvs2 { 300 bias-pull-down; 301 }; 302 303 lvs3 { 304 bias-pull-down; 305 }; 306 307 lvs4 { 308 bias-pull-down; 309 }; 310 311 lvs5 { 312 bias-pull-down; 313 }; 314 315 lvs6 { 316 bias-pull-down; 317 }; 318 319 lvs7 { 320 bias-pull-down; 321 }; 322 323 usb-switch {}; 324 325 hdmi-switch {}; 326 327 ncp { 328 regulator-min-microvolt = <1800000>; 329 regulator-max-microvolt = <1800000>; 330 qcom,switch-mode-frequency = <1600000>; 331 }; 332 }; 333 }; 334 335 qcom,ssbi@500000 { 336 pmic@0 { 337 gpio@150 { 338 gpio_keys_pin_a: gpio-keys-pin-active { 339 pins = "gpio3", "gpio4", "gpio29", "gpio35"; 340 function = "normal"; 341 342 bias-pull-up; 343 drive-push-pull; 344 input-enable; 345 power-source = <2>; 346 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; 347 qcom,pull-up-strength = <0>; 348 }; 349 }; 350 }; 351 }; 352 353 usb@12500000 { 354 status = "okay"; 355 dr_mode = "otg"; 356 ulpi { 357 phy { 358 v3p3-supply = <&pm8921_l3>; 359 v1p8-supply = <&pm8921_l4>; 360 }; 361 }; 362 }; 363 364 gsbi@1a200000 { 365 status = "ok"; 366 qcom,mode = <GSBI_PROT_I2C_UART>; 367 368 serial@1a240000 { 369 status = "ok"; 370 371 pinctrl-names = "default"; 372 pinctrl-0 = <&gsbi5_uart_pin_a>; 373 }; 374 }; 375 376 amba { 377 sdcc1: sdcc@12400000 { 378 status = "okay"; 379 380 vmmc-supply = <&pm8921_l5>; 381 vqmmc-supply = <&pm8921_s4>; 382 }; 383 384 sdcc3: sdcc@12180000 { 385 status = "okay"; 386 387 vmmc-supply = <&pm8921_l6>; 388 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; 389 390 pinctrl-names = "default"; 391 pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; 392 }; 393 }; 394 395 riva-pil@3204000 { 396 status = "okay"; 397 398 pinctrl-names = "default"; 399 pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; 400 }; 401 }; 402}; 403