• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Genmai board
4 *
5 * Copyright (C) 2013-14 Renesas Solutions Corp.
6 * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
7 */
8
9/dts-v1/;
10#include "r7s72100.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
13
14/ {
15	model = "Genmai";
16	compatible = "renesas,genmai", "renesas,r7s72100";
17
18	aliases {
19		serial0 = &scif2;
20	};
21
22	chosen {
23		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
24		stdout-path = "serial0:115200n8";
25	};
26
27	memory@8000000 {
28		device_type = "memory";
29		reg = <0x08000000 0x08000000>;
30	};
31
32	lbsc {
33		#address-cells = <1>;
34		#size-cells = <1>;
35	};
36
37	leds {
38		status = "okay";
39		compatible = "gpio-leds";
40
41		led1 {
42			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
43		};
44
45		led2 {
46			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
47		};
48	};
49};
50
51&pinctrl {
52
53	scif2_pins: serial2 {
54		/* P3_0 as TxD2; P3_2 as RxD2 */
55		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
56	};
57
58	i2c2_pins: i2c2 {
59		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
60		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
61	};
62
63	ether_pins: ether {
64		/* Ethernet on Ports 1,2,3,5 */
65		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
66			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
67			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
68			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
69			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
70			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
71			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
72			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
73			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
74			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
75			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
76			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
77			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
78			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
79			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
80			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
81			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
82			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
83	};
84};
85
86&extal_clk {
87	clock-frequency = <13330000>;
88};
89
90&usb_x1_clk {
91	clock-frequency = <48000000>;
92};
93
94&rtc_x1_clk {
95	clock-frequency = <32768>;
96};
97
98&mtu2 {
99	status = "okay";
100};
101
102&ether {
103	pinctrl-names = "default";
104	pinctrl-0 = <&ether_pins>;
105
106	status = "okay";
107
108	renesas,no-ether-link;
109	phy-handle = <&phy0>;
110	phy0: ethernet-phy@0 {
111		reg = <0>;
112	};
113};
114
115&i2c2 {
116	status = "okay";
117	clock-frequency = <400000>;
118
119	pinctrl-names = "default";
120	pinctrl-0 = <&i2c2_pins>;
121
122	eeprom@50 {
123		compatible = "renesas,r1ex24128", "atmel,24c128";
124		reg = <0x50>;
125		pagesize = <64>;
126	};
127};
128
129&rtc {
130	status = "okay";
131};
132
133&scif2 {
134	pinctrl-names = "default";
135	pinctrl-0 = <&scif2_pins>;
136
137	status = "okay";
138};
139
140&spi4 {
141	status = "okay";
142
143	codec: codec@0 {
144		compatible = "wlf,wm8978";
145		reg = <0>;
146		spi-max-frequency = <5000000>;
147	};
148};
149