• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Based on Mans Rullgard's Tango3 DT
4 * https://github.com/mansr/linux-tangox
5 */
6
7#include <dt-bindings/interrupt-controller/arm-gic.h>
8
9#define  CPU_CLK	0
10#define  SYS_CLK	1
11#define  USB_CLK	2
12#define SDIO_CLK	3
13
14/ {
15	interrupt-parent = <&gic>;
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	periph_clk: periph_clk {
20		compatible = "fixed-factor-clock";
21		clocks = <&clkgen CPU_CLK>;
22		clock-mult = <1>;
23		clock-div  = <2>;
24		#clock-cells = <0>;
25	};
26
27	mpcore {
28		compatible = "simple-bus";
29		ranges = <0x00000000 0x20000000 0x2000>;
30		#address-cells = <1>;
31		#size-cells = <1>;
32
33		scu@0 {
34			compatible = "arm,cortex-a9-scu";
35			reg = <0x0 0x100>;
36		};
37
38		twd@600 {
39			compatible = "arm,cortex-a9-twd-timer";
40			reg = <0x600 0x10>;
41			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
42			clocks = <&periph_clk>;
43			always-on;
44		};
45
46		gic: interrupt-controller@1000 {
47			compatible = "arm,cortex-a9-gic";
48			#interrupt-cells = <3>;
49			interrupt-controller;
50			reg = <0x1000 0x1000>, <0x100 0x100>;
51		};
52	};
53
54	l2cc: cache-controller@20100000 {
55		compatible = "arm,pl310-cache";
56		reg = <0x20100000 0x1000>;
57		cache-level = <2>;
58		cache-unified;
59	};
60
61	soc {
62		compatible = "simple-bus";
63		interrupt-parent = <&irq0>;
64		#address-cells = <1>;
65		#size-cells = <1>;
66		ranges;
67
68		xtal: xtal {
69			compatible = "fixed-clock";
70			clock-frequency = <27000000>;
71			#clock-cells = <0>;
72		};
73
74		clkgen: clkgen@10000 {
75			compatible = "sigma,tango4-clkgen";
76			reg = <0x10000 0x100>;
77			clocks = <&xtal>;
78			#clock-cells = <1>;
79		};
80
81		tick-counter@10048 {
82			compatible = "sigma,tick-counter";
83			reg = <0x10048 0x4>;
84			clocks = <&xtal>;
85		};
86
87		uart: serial@10700 {
88			compatible = "ralink,rt2880-uart", "ns16550a";
89			reg = <0x10700 0x30>;
90			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
91			clock-frequency = <7372800>;
92			reg-shift = <2>;
93		};
94
95		watchdog@1fd00 {
96			compatible = "sigma,smp8759-wdt";
97			reg = <0x1fd00 8>;
98			clocks = <&xtal>;
99		};
100
101		mmc0: mmc@21000 {
102			compatible = "arasan,sdhci-8.9a";
103			reg = <0x21000 0x200>;
104			clock-names = "clk_xin", "clk_ahb";
105			clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
106			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
107		};
108
109		mmc1: mmc@21200 {
110			compatible = "arasan,sdhci-8.9a";
111			reg = <0x21200 0x200>;
112			clock-names = "clk_xin", "clk_ahb";
113			clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
114			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
115		};
116
117		usb0: usb@21400 {
118			compatible = "chipidea,usb2";
119			reg = <0x21400 0x200>;
120			interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
121			phys = <&usb0_phy>;
122			phy-names = "usb-phy";
123		};
124
125		usb0_phy: phy@21700 {
126			compatible = "sigma,smp8642-usb-phy";
127			reg = <0x21700 0x100>;
128			#phy-cells = <0>;
129			clocks = <&clkgen USB_CLK>;
130		};
131
132		usb1: usb@25400 {
133			compatible = "chipidea,usb2";
134			reg = <0x25400 0x200>;
135			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
136			phys = <&usb1_phy>;
137			phy-names = "usb-phy";
138		};
139
140		usb1_phy: phy@25700 {
141			compatible = "sigma,smp8642-usb-phy";
142			reg = <0x25700 0x100>;
143			#phy-cells = <0>;
144			clocks = <&clkgen USB_CLK>;
145		};
146
147		eth0: ethernet@26000 {
148			compatible = "sigma,smp8734-ethernet";
149			reg = <0x26000 0x800>;
150			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
151			clocks = <&clkgen SYS_CLK>;
152		};
153
154		intc: interrupt-controller@6e000 {
155			compatible = "sigma,smp8642-intc";
156			reg = <0x6e000 0x400>;
157			ranges = <0 0x6e000 0x400>;
158			interrupt-parent = <&gic>;
159			#address-cells = <1>;
160			#size-cells = <1>;
161
162			irq0: irq0@0 {
163				reg = <0x000 0x100>;
164				interrupt-controller;
165				#interrupt-cells = <2>;
166				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
167			};
168
169			irq1: irq1@100 {
170				reg = <0x100 0x100>;
171				interrupt-controller;
172				#interrupt-cells = <2>;
173				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
174			};
175
176			irq2: irq2@300 {
177				reg = <0x300 0x100>;
178				interrupt-controller;
179				#interrupt-cells = <2>;
180				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
181			};
182		};
183	};
184};
185