1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * PROM library initialisation code.
7 *
8 * Copyright (C) 1999,2000,2004,2005,2012 MIPS Technologies, Inc.
9 * All rights reserved.
10 * Authors: Carsten Langgaard <carstenl@mips.com>
11 * Maciej W. Rozycki <macro@mips.com>
12 * Steven J. Hill <sjhill@mips.com>
13 */
14 #include <linux/init.h>
15 #include <linux/string.h>
16 #include <linux/kernel.h>
17 #include <linux/pci_regs.h>
18 #include <linux/serial_core.h>
19
20 #include <asm/cacheflush.h>
21 #include <asm/smp-ops.h>
22 #include <asm/traps.h>
23 #include <asm/fw/fw.h>
24 #include <asm/mips-cps.h>
25 #include <asm/mips-boards/generic.h>
26 #include <asm/mips-boards/malta.h>
27
28 static int mips_revision_corid;
29 int mips_revision_sconid;
30
31 /* Bonito64 system controller register base. */
32 unsigned long _pcictrl_bonito;
33 unsigned long _pcictrl_bonito_pcicfg;
34
35 /* GT64120 system controller register base */
36 unsigned long _pcictrl_gt64120;
37
38 /* MIPS System controller register base */
39 unsigned long _pcictrl_msc;
40
41 #ifdef CONFIG_SERIAL_8250_CONSOLE
console_config(void)42 static void __init console_config(void)
43 {
44 char console_string[40];
45 int baud = 0;
46 char parity = '\0', bits = '\0', flow = '\0';
47 char *s;
48
49 s = fw_getenv("modetty0");
50 if (s) {
51 while (*s >= '0' && *s <= '9')
52 baud = baud*10 + *s++ - '0';
53 if (*s == ',')
54 s++;
55 if (*s)
56 parity = *s++;
57 if (*s == ',')
58 s++;
59 if (*s)
60 bits = *s++;
61 if (*s == ',')
62 s++;
63 if (*s == 'h')
64 flow = 'r';
65 }
66 if (baud == 0)
67 baud = 38400;
68 if (parity != 'n' && parity != 'o' && parity != 'e')
69 parity = 'n';
70 if (bits != '7' && bits != '8')
71 bits = '8';
72 if (flow == '\0')
73 flow = 'r';
74
75 if ((strstr(fw_getcmdline(), "earlycon=")) == NULL) {
76 sprintf(console_string, "uart8250,io,0x3f8,%d%c%c", baud,
77 parity, bits);
78 setup_earlycon(console_string);
79 }
80
81 if ((strstr(fw_getcmdline(), "console=")) == NULL) {
82 sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
83 parity, bits, flow);
84 strcat(fw_getcmdline(), console_string);
85 pr_info("Config serial console:%s\n", console_string);
86 }
87 }
88 #endif
89
mips_nmi_setup(void)90 static void __init mips_nmi_setup(void)
91 {
92 void *base;
93 extern char except_vec_nmi[];
94
95 base = cpu_has_veic ?
96 (void *)(CAC_BASE + 0xa80) :
97 (void *)(CAC_BASE + 0x380);
98 memcpy(base, except_vec_nmi, 0x80);
99 flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
100 }
101
mips_ejtag_setup(void)102 static void __init mips_ejtag_setup(void)
103 {
104 void *base;
105 extern char except_vec_ejtag_debug[];
106
107 base = cpu_has_veic ?
108 (void *)(CAC_BASE + 0xa00) :
109 (void *)(CAC_BASE + 0x300);
110 memcpy(base, except_vec_ejtag_debug, 0x80);
111 flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
112 }
113
mips_cpc_default_phys_base(void)114 phys_addr_t mips_cpc_default_phys_base(void)
115 {
116 return CPC_BASE_ADDR;
117 }
118
prom_init(void)119 void __init prom_init(void)
120 {
121 /*
122 * early setup of _pcictrl_bonito so that we can determine
123 * the system controller on a CORE_EMUL board
124 */
125 _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE);
126
127 mips_revision_corid = MIPS_REVISION_CORID;
128
129 if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) {
130 if (BONITO_PCIDID == 0x0001df53 ||
131 BONITO_PCIDID == 0x0003df53)
132 mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON;
133 else
134 mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC;
135 }
136
137 mips_revision_sconid = MIPS_REVISION_SCONID;
138 if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) {
139 switch (mips_revision_corid) {
140 case MIPS_REVISION_CORID_QED_RM5261:
141 case MIPS_REVISION_CORID_CORE_LV:
142 case MIPS_REVISION_CORID_CORE_FPGA:
143 case MIPS_REVISION_CORID_CORE_FPGAR2:
144 mips_revision_sconid = MIPS_REVISION_SCON_GT64120;
145 break;
146 case MIPS_REVISION_CORID_CORE_EMUL_BON:
147 case MIPS_REVISION_CORID_BONITO64:
148 case MIPS_REVISION_CORID_CORE_20K:
149 mips_revision_sconid = MIPS_REVISION_SCON_BONITO;
150 break;
151 case MIPS_REVISION_CORID_CORE_MSC:
152 case MIPS_REVISION_CORID_CORE_FPGA2:
153 case MIPS_REVISION_CORID_CORE_24K:
154 /*
155 * SOCit/ROCit support is essentially identical
156 * but make an attempt to distinguish them
157 */
158 mips_revision_sconid = MIPS_REVISION_SCON_SOCIT;
159 break;
160 case MIPS_REVISION_CORID_CORE_FPGA3:
161 case MIPS_REVISION_CORID_CORE_FPGA4:
162 case MIPS_REVISION_CORID_CORE_FPGA5:
163 case MIPS_REVISION_CORID_CORE_EMUL_MSC:
164 default:
165 /* See above */
166 mips_revision_sconid = MIPS_REVISION_SCON_ROCIT;
167 break;
168 }
169 }
170
171 switch (mips_revision_sconid) {
172 u32 start, map, mask, data;
173
174 case MIPS_REVISION_SCON_GT64120:
175 /*
176 * Setup the North bridge to do Master byte-lane swapping
177 * when running in bigendian.
178 */
179 _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000);
180
181 #ifdef CONFIG_CPU_LITTLE_ENDIAN
182 GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT |
183 GT_PCI0_CMD_SBYTESWAP_BIT);
184 #else
185 GT_WRITE(GT_PCI0_CMD_OFS, 0);
186 #endif
187 /* Fix up PCI I/O mapping if necessary (for Atlas). */
188 start = GT_READ(GT_PCI0IOLD_OFS);
189 map = GT_READ(GT_PCI0IOREMAP_OFS);
190 if ((start & map) != 0) {
191 map &= ~start;
192 GT_WRITE(GT_PCI0IOREMAP_OFS, map);
193 }
194
195 set_io_port_base(MALTA_GT_PORT_BASE);
196 break;
197
198 case MIPS_REVISION_SCON_BONITO:
199 _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE);
200
201 /*
202 * Disable Bonito IOBC.
203 */
204 BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
205 ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
206 BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
207
208 /*
209 * Setup the North bridge to do Master byte-lane swapping
210 * when running in bigendian.
211 */
212 #ifdef CONFIG_CPU_LITTLE_ENDIAN
213 BONITO_BONGENCFG = BONITO_BONGENCFG &
214 ~(BONITO_BONGENCFG_MSTRBYTESWAP |
215 BONITO_BONGENCFG_BYTESWAP);
216 #else
217 BONITO_BONGENCFG = BONITO_BONGENCFG |
218 BONITO_BONGENCFG_MSTRBYTESWAP |
219 BONITO_BONGENCFG_BYTESWAP;
220 #endif
221
222 set_io_port_base(MALTA_BONITO_PORT_BASE);
223 break;
224
225 case MIPS_REVISION_SCON_SOCIT:
226 case MIPS_REVISION_SCON_ROCIT:
227 _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
228 mips_pci_controller:
229 mb();
230 MSC_READ(MSC01_PCI_CFG, data);
231 MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
232 wmb();
233
234 /* Fix up lane swapping. */
235 #ifdef CONFIG_CPU_LITTLE_ENDIAN
236 MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
237 #else
238 MSC_WRITE(MSC01_PCI_SWAP,
239 MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF |
240 MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
241 MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
242 #endif
243
244 /*
245 * Setup the Malta max (2GB) memory for PCI DMA in host bridge
246 * in transparent addressing mode.
247 */
248 mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH;
249 MSC_WRITE(MSC01_PCI_BAR0, mask);
250 MSC_WRITE(MSC01_PCI_HEAD4, mask);
251
252 mask &= MSC01_PCI_BAR0_SIZE_MSK;
253 MSC_WRITE(MSC01_PCI_P2SCMSKL, mask);
254 MSC_WRITE(MSC01_PCI_P2SCMAPL, mask);
255
256 /* Don't handle target retries indefinitely. */
257 if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
258 MSC01_PCI_CFG_MAXRTRY_MSK)
259 data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
260 MSC01_PCI_CFG_MAXRTRY_SHF)) |
261 ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
262 MSC01_PCI_CFG_MAXRTRY_SHF);
263
264 wmb();
265 MSC_WRITE(MSC01_PCI_CFG, data);
266 mb();
267
268 set_io_port_base(MALTA_MSC_PORT_BASE);
269 break;
270
271 case MIPS_REVISION_SCON_SOCITSC:
272 case MIPS_REVISION_SCON_SOCITSCP:
273 _pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000);
274 goto mips_pci_controller;
275
276 default:
277 /* Unknown system controller */
278 while (1); /* We die here... */
279 }
280 board_nmi_handler_setup = mips_nmi_setup;
281 board_ejtag_handler_setup = mips_ejtag_setup;
282
283 fw_init_cmdline();
284 fw_meminit();
285 #ifdef CONFIG_SERIAL_8250_CONSOLE
286 console_config();
287 #endif
288 /* Early detection of CMP support */
289 mips_cpc_probe();
290
291 if (!register_cps_smp_ops())
292 return;
293 if (!register_cmp_smp_ops())
294 return;
295 if (!register_vsmp_smp_ops())
296 return;
297 register_up_smp_ops();
298 }
299