1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/mmc/host/sdhci_f_sdh30.c
4 *
5 * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
6 * Vincent Yang <vincent.yang@tw.fujitsu.com>
7 * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org>
8 */
9
10 #include <linux/acpi.h>
11 #include <linux/err.h>
12 #include <linux/delay.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/property.h>
16 #include <linux/clk.h>
17
18 #include "sdhci-pltfm.h"
19 #include "sdhci_f_sdh30.h"
20
21 struct f_sdhost_priv {
22 struct clk *clk_iface;
23 struct clk *clk;
24 u32 vendor_hs200;
25 struct device *dev;
26 bool enable_cmd_dat_delay;
27 };
28
sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host * host)29 static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host)
30 {
31 struct f_sdhost_priv *priv = sdhci_priv(host);
32 u32 ctrl = 0;
33
34 usleep_range(2500, 3000);
35 ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
36 ctrl |= F_SDH30_CRES_O_DN;
37 sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
38 ctrl |= F_SDH30_MSEL_O_1_8;
39 sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
40
41 ctrl &= ~F_SDH30_CRES_O_DN;
42 sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
43 usleep_range(2500, 3000);
44
45 if (priv->vendor_hs200) {
46 dev_info(priv->dev, "%s: setting hs200\n", __func__);
47 ctrl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
48 ctrl |= priv->vendor_hs200;
49 sdhci_writel(host, ctrl, F_SDH30_ESD_CONTROL);
50 }
51
52 ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
53 ctrl |= F_SDH30_CMD_CHK_DIS;
54 sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
55 }
56
sdhci_f_sdh30_get_min_clock(struct sdhci_host * host)57 static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host)
58 {
59 return F_SDH30_MIN_CLOCK;
60 }
61
sdhci_f_sdh30_reset(struct sdhci_host * host,u8 mask)62 static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask)
63 {
64 struct f_sdhost_priv *priv = sdhci_priv(host);
65 u32 ctl;
66
67 if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0)
68 sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL);
69
70 sdhci_reset(host, mask);
71
72 if (priv->enable_cmd_dat_delay) {
73 ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
74 ctl |= F_SDH30_CMD_DAT_DELAY;
75 sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
76 }
77 }
78
79 static const struct sdhci_ops sdhci_f_sdh30_ops = {
80 .voltage_switch = sdhci_f_sdh30_soft_voltage_switch,
81 .get_min_clock = sdhci_f_sdh30_get_min_clock,
82 .reset = sdhci_f_sdh30_reset,
83 .set_clock = sdhci_set_clock,
84 .set_bus_width = sdhci_set_bus_width,
85 .set_uhs_signaling = sdhci_set_uhs_signaling,
86 };
87
sdhci_f_sdh30_probe(struct platform_device * pdev)88 static int sdhci_f_sdh30_probe(struct platform_device *pdev)
89 {
90 struct sdhci_host *host;
91 struct device *dev = &pdev->dev;
92 int irq, ctrl = 0, ret = 0;
93 struct f_sdhost_priv *priv;
94 u32 reg = 0;
95
96 irq = platform_get_irq(pdev, 0);
97 if (irq < 0)
98 return irq;
99
100 host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
101 if (IS_ERR(host))
102 return PTR_ERR(host);
103
104 priv = sdhci_priv(host);
105 priv->dev = dev;
106
107 host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
108 SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
109 host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
110 SDHCI_QUIRK2_TUNING_WORK_AROUND;
111
112 priv->enable_cmd_dat_delay = device_property_read_bool(dev,
113 "fujitsu,cmd-dat-delay-select");
114
115 ret = mmc_of_parse(host->mmc);
116 if (ret)
117 goto err;
118
119 platform_set_drvdata(pdev, host);
120
121 host->hw_name = "f_sdh30";
122 host->ops = &sdhci_f_sdh30_ops;
123 host->irq = irq;
124
125 host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
126 if (IS_ERR(host->ioaddr)) {
127 ret = PTR_ERR(host->ioaddr);
128 goto err;
129 }
130
131 if (dev_of_node(dev)) {
132 sdhci_get_of_property(pdev);
133
134 priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
135 if (IS_ERR(priv->clk_iface)) {
136 ret = PTR_ERR(priv->clk_iface);
137 goto err;
138 }
139
140 ret = clk_prepare_enable(priv->clk_iface);
141 if (ret)
142 goto err;
143
144 priv->clk = devm_clk_get(&pdev->dev, "core");
145 if (IS_ERR(priv->clk)) {
146 ret = PTR_ERR(priv->clk);
147 goto err_clk;
148 }
149
150 ret = clk_prepare_enable(priv->clk);
151 if (ret)
152 goto err_clk;
153 }
154
155 /* init vendor specific regs */
156 ctrl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
157 ctrl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
158 F_SDH30_AHB_INCR_4;
159 ctrl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
160 sdhci_writew(host, ctrl, F_SDH30_AHB_CONFIG);
161
162 reg = sdhci_readl(host, F_SDH30_ESD_CONTROL);
163 sdhci_writel(host, reg & ~F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL);
164 msleep(20);
165 sdhci_writel(host, reg | F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL);
166
167 reg = sdhci_readl(host, SDHCI_CAPABILITIES);
168 if (reg & SDHCI_CAN_DO_8BIT)
169 priv->vendor_hs200 = F_SDH30_EMMC_HS200;
170
171 ret = sdhci_add_host(host);
172 if (ret)
173 goto err_add_host;
174
175 return 0;
176
177 err_add_host:
178 clk_disable_unprepare(priv->clk);
179 err_clk:
180 clk_disable_unprepare(priv->clk_iface);
181 err:
182 sdhci_free_host(host);
183 return ret;
184 }
185
sdhci_f_sdh30_remove(struct platform_device * pdev)186 static int sdhci_f_sdh30_remove(struct platform_device *pdev)
187 {
188 struct sdhci_host *host = platform_get_drvdata(pdev);
189 struct f_sdhost_priv *priv = sdhci_priv(host);
190
191 sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
192 0xffffffff);
193
194 clk_disable_unprepare(priv->clk_iface);
195 clk_disable_unprepare(priv->clk);
196
197 sdhci_free_host(host);
198 platform_set_drvdata(pdev, NULL);
199
200 return 0;
201 }
202
203 #ifdef CONFIG_OF
204 static const struct of_device_id f_sdh30_dt_ids[] = {
205 { .compatible = "fujitsu,mb86s70-sdhci-3.0" },
206 { /* sentinel */ }
207 };
208 MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids);
209 #endif
210
211 #ifdef CONFIG_ACPI
212 static const struct acpi_device_id f_sdh30_acpi_ids[] = {
213 { "SCX0002" },
214 { /* sentinel */ }
215 };
216 MODULE_DEVICE_TABLE(acpi, f_sdh30_acpi_ids);
217 #endif
218
219 static struct platform_driver sdhci_f_sdh30_driver = {
220 .driver = {
221 .name = "f_sdh30",
222 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
223 .of_match_table = of_match_ptr(f_sdh30_dt_ids),
224 .acpi_match_table = ACPI_PTR(f_sdh30_acpi_ids),
225 .pm = &sdhci_pltfm_pmops,
226 },
227 .probe = sdhci_f_sdh30_probe,
228 .remove = sdhci_f_sdh30_remove,
229 };
230
231 module_platform_driver(sdhci_f_sdh30_driver);
232
233 MODULE_DESCRIPTION("F_SDH30 SD Card Controller driver");
234 MODULE_LICENSE("GPL v2");
235 MODULE_AUTHOR("FUJITSU SEMICONDUCTOR LTD.");
236 MODULE_ALIAS("platform:f_sdh30");
237