1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
4 * Copyright 2008 Johannes Berg <johannes@sipsolutions.net>
5 *
6 * This driver is a port from stlc45xx:
7 * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
8 */
9
10 #include <linux/module.h>
11 #include <linux/platform_device.h>
12 #include <linux/interrupt.h>
13 #include <linux/firmware.h>
14 #include <linux/delay.h>
15 #include <linux/irq.h>
16 #include <linux/spi/spi.h>
17 #include <linux/etherdevice.h>
18 #include <linux/gpio.h>
19 #include <linux/slab.h>
20
21 #include "p54spi.h"
22 #include "p54.h"
23
24 #include "lmac.h"
25
26 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
27 #include "p54spi_eeprom.h"
28 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
29
30 MODULE_FIRMWARE("3826.arm");
31
32 /* gpios should be handled in board files and provided via platform data,
33 * but because it's currently impossible for p54spi to have a header file
34 * in include/linux, let's use module paramaters for now
35 */
36
37 static int p54spi_gpio_power = 97;
38 module_param(p54spi_gpio_power, int, 0444);
39 MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
40
41 static int p54spi_gpio_irq = 87;
42 module_param(p54spi_gpio_irq, int, 0444);
43 MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
44
p54spi_spi_read(struct p54s_priv * priv,u8 address,void * buf,size_t len)45 static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
46 void *buf, size_t len)
47 {
48 struct spi_transfer t[2];
49 struct spi_message m;
50 __le16 addr;
51
52 /* We first push the address */
53 addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
54
55 spi_message_init(&m);
56 memset(t, 0, sizeof(t));
57
58 t[0].tx_buf = &addr;
59 t[0].len = sizeof(addr);
60 spi_message_add_tail(&t[0], &m);
61
62 t[1].rx_buf = buf;
63 t[1].len = len;
64 spi_message_add_tail(&t[1], &m);
65
66 spi_sync(priv->spi, &m);
67 }
68
69
p54spi_spi_write(struct p54s_priv * priv,u8 address,const void * buf,size_t len)70 static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
71 const void *buf, size_t len)
72 {
73 struct spi_transfer t[3];
74 struct spi_message m;
75 __le16 addr;
76
77 /* We first push the address */
78 addr = cpu_to_le16(address << 8);
79
80 spi_message_init(&m);
81 memset(t, 0, sizeof(t));
82
83 t[0].tx_buf = &addr;
84 t[0].len = sizeof(addr);
85 spi_message_add_tail(&t[0], &m);
86
87 t[1].tx_buf = buf;
88 t[1].len = len & ~1;
89 spi_message_add_tail(&t[1], &m);
90
91 if (len % 2) {
92 __le16 last_word;
93 last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
94
95 t[2].tx_buf = &last_word;
96 t[2].len = sizeof(last_word);
97 spi_message_add_tail(&t[2], &m);
98 }
99
100 spi_sync(priv->spi, &m);
101 }
102
p54spi_read32(struct p54s_priv * priv,u8 addr)103 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
104 {
105 __le32 val;
106
107 p54spi_spi_read(priv, addr, &val, sizeof(val));
108
109 return le32_to_cpu(val);
110 }
111
p54spi_write16(struct p54s_priv * priv,u8 addr,__le16 val)112 static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
113 {
114 p54spi_spi_write(priv, addr, &val, sizeof(val));
115 }
116
p54spi_write32(struct p54s_priv * priv,u8 addr,__le32 val)117 static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
118 {
119 p54spi_spi_write(priv, addr, &val, sizeof(val));
120 }
121
p54spi_wait_bit(struct p54s_priv * priv,u16 reg,u32 bits)122 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
123 {
124 int i;
125
126 for (i = 0; i < 2000; i++) {
127 u32 buffer = p54spi_read32(priv, reg);
128 if ((buffer & bits) == bits)
129 return 1;
130 }
131 return 0;
132 }
133
p54spi_spi_write_dma(struct p54s_priv * priv,__le32 base,const void * buf,size_t len)134 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
135 const void *buf, size_t len)
136 {
137 if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
138 dev_err(&priv->spi->dev, "spi_write_dma not allowed "
139 "to DMA write.\n");
140 return -EAGAIN;
141 }
142
143 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
144 cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
145
146 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
147 p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
148 p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
149 return 0;
150 }
151
p54spi_request_firmware(struct ieee80211_hw * dev)152 static int p54spi_request_firmware(struct ieee80211_hw *dev)
153 {
154 struct p54s_priv *priv = dev->priv;
155 int ret;
156
157 /* FIXME: should driver use it's own struct device? */
158 ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
159
160 if (ret < 0) {
161 dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
162 return ret;
163 }
164
165 ret = p54_parse_firmware(dev, priv->firmware);
166 if (ret) {
167 release_firmware(priv->firmware);
168 return ret;
169 }
170
171 return 0;
172 }
173
p54spi_request_eeprom(struct ieee80211_hw * dev)174 static int p54spi_request_eeprom(struct ieee80211_hw *dev)
175 {
176 struct p54s_priv *priv = dev->priv;
177 const struct firmware *eeprom;
178 int ret;
179
180 /* allow users to customize their eeprom.
181 */
182
183 ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev);
184 if (ret < 0) {
185 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
186 dev_info(&priv->spi->dev, "loading default eeprom...\n");
187 ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
188 sizeof(p54spi_eeprom));
189 #else
190 dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
191 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
192 } else {
193 dev_info(&priv->spi->dev, "loading user eeprom...\n");
194 ret = p54_parse_eeprom(dev, (void *) eeprom->data,
195 (int)eeprom->size);
196 release_firmware(eeprom);
197 }
198 return ret;
199 }
200
p54spi_upload_firmware(struct ieee80211_hw * dev)201 static int p54spi_upload_firmware(struct ieee80211_hw *dev)
202 {
203 struct p54s_priv *priv = dev->priv;
204 unsigned long fw_len, _fw_len;
205 unsigned int offset = 0;
206 int err = 0;
207 u8 *fw;
208
209 fw_len = priv->firmware->size;
210 fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
211 if (!fw)
212 return -ENOMEM;
213
214 /* stop the device */
215 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
216 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
217 SPI_CTRL_STAT_START_HALTED));
218
219 msleep(TARGET_BOOT_SLEEP);
220
221 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
222 SPI_CTRL_STAT_HOST_OVERRIDE |
223 SPI_CTRL_STAT_START_HALTED));
224
225 msleep(TARGET_BOOT_SLEEP);
226
227 while (fw_len > 0) {
228 _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
229
230 err = p54spi_spi_write_dma(priv, cpu_to_le32(
231 ISL38XX_DEV_FIRMWARE_ADDR + offset),
232 (fw + offset), _fw_len);
233 if (err < 0)
234 goto out;
235
236 fw_len -= _fw_len;
237 offset += _fw_len;
238 }
239
240 BUG_ON(fw_len != 0);
241
242 /* enable host interrupts */
243 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
244 cpu_to_le32(SPI_HOST_INTS_DEFAULT));
245
246 /* boot the device */
247 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
248 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
249 SPI_CTRL_STAT_RAM_BOOT));
250
251 msleep(TARGET_BOOT_SLEEP);
252
253 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
254 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
255 msleep(TARGET_BOOT_SLEEP);
256
257 out:
258 kfree(fw);
259 return err;
260 }
261
p54spi_power_off(struct p54s_priv * priv)262 static void p54spi_power_off(struct p54s_priv *priv)
263 {
264 disable_irq(gpio_to_irq(p54spi_gpio_irq));
265 gpio_set_value(p54spi_gpio_power, 0);
266 }
267
p54spi_power_on(struct p54s_priv * priv)268 static void p54spi_power_on(struct p54s_priv *priv)
269 {
270 gpio_set_value(p54spi_gpio_power, 1);
271 enable_irq(gpio_to_irq(p54spi_gpio_irq));
272
273 /* need to wait a while before device can be accessed, the length
274 * is just a guess
275 */
276 msleep(10);
277 }
278
p54spi_int_ack(struct p54s_priv * priv,u32 val)279 static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
280 {
281 p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
282 }
283
p54spi_wakeup(struct p54s_priv * priv)284 static int p54spi_wakeup(struct p54s_priv *priv)
285 {
286 /* wake the chip */
287 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
288 cpu_to_le32(SPI_TARGET_INT_WAKEUP));
289
290 /* And wait for the READY interrupt */
291 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
292 SPI_HOST_INT_READY)) {
293 dev_err(&priv->spi->dev, "INT_READY timeout\n");
294 return -EBUSY;
295 }
296
297 p54spi_int_ack(priv, SPI_HOST_INT_READY);
298 return 0;
299 }
300
p54spi_sleep(struct p54s_priv * priv)301 static inline void p54spi_sleep(struct p54s_priv *priv)
302 {
303 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
304 cpu_to_le32(SPI_TARGET_INT_SLEEP));
305 }
306
p54spi_int_ready(struct p54s_priv * priv)307 static void p54spi_int_ready(struct p54s_priv *priv)
308 {
309 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
310 SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
311
312 switch (priv->fw_state) {
313 case FW_STATE_BOOTING:
314 priv->fw_state = FW_STATE_READY;
315 complete(&priv->fw_comp);
316 break;
317 case FW_STATE_RESETTING:
318 priv->fw_state = FW_STATE_READY;
319 /* TODO: reinitialize state */
320 break;
321 default:
322 break;
323 }
324 }
325
p54spi_rx(struct p54s_priv * priv)326 static int p54spi_rx(struct p54s_priv *priv)
327 {
328 struct sk_buff *skb;
329 u16 len;
330 u16 rx_head[2];
331 #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
332
333 if (p54spi_wakeup(priv) < 0)
334 return -EBUSY;
335
336 /* Read data size and first data word in one SPI transaction
337 * This is workaround for firmware/DMA bug,
338 * when first data word gets lost under high load.
339 */
340 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
341 len = rx_head[0];
342
343 if (len == 0) {
344 p54spi_sleep(priv);
345 dev_err(&priv->spi->dev, "rx request of zero bytes\n");
346 return 0;
347 }
348
349 /* Firmware may insert up to 4 padding bytes after the lmac header,
350 * but it does not amend the size of SPI data transfer.
351 * Such packets has correct data size in header, thus referencing
352 * past the end of allocated skb. Reserve extra 4 bytes for this case
353 */
354 skb = dev_alloc_skb(len + 4);
355 if (!skb) {
356 p54spi_sleep(priv);
357 dev_err(&priv->spi->dev, "could not alloc skb");
358 return -ENOMEM;
359 }
360
361 if (len <= READAHEAD_SZ) {
362 skb_put_data(skb, rx_head + 1, len);
363 } else {
364 skb_put_data(skb, rx_head + 1, READAHEAD_SZ);
365 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
366 skb_put(skb, len - READAHEAD_SZ),
367 len - READAHEAD_SZ);
368 }
369 p54spi_sleep(priv);
370 /* Put additional bytes to compensate for the possible
371 * alignment-caused truncation
372 */
373 skb_put(skb, 4);
374
375 if (p54_rx(priv->hw, skb) == 0)
376 dev_kfree_skb(skb);
377
378 return 0;
379 }
380
381
p54spi_interrupt(int irq,void * config)382 static irqreturn_t p54spi_interrupt(int irq, void *config)
383 {
384 struct spi_device *spi = config;
385 struct p54s_priv *priv = spi_get_drvdata(spi);
386
387 ieee80211_queue_work(priv->hw, &priv->work);
388
389 return IRQ_HANDLED;
390 }
391
p54spi_tx_frame(struct p54s_priv * priv,struct sk_buff * skb)392 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
393 {
394 struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
395 int ret = 0;
396
397 if (p54spi_wakeup(priv) < 0)
398 return -EBUSY;
399
400 ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
401 if (ret < 0)
402 goto out;
403
404 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
405 SPI_HOST_INT_WR_READY)) {
406 dev_err(&priv->spi->dev, "WR_READY timeout\n");
407 ret = -EAGAIN;
408 goto out;
409 }
410
411 p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
412
413 if (FREE_AFTER_TX(skb))
414 p54_free_skb(priv->hw, skb);
415 out:
416 p54spi_sleep(priv);
417 return ret;
418 }
419
p54spi_wq_tx(struct p54s_priv * priv)420 static int p54spi_wq_tx(struct p54s_priv *priv)
421 {
422 struct p54s_tx_info *entry;
423 struct sk_buff *skb;
424 struct ieee80211_tx_info *info;
425 struct p54_tx_info *minfo;
426 struct p54s_tx_info *dinfo;
427 unsigned long flags;
428 int ret = 0;
429
430 spin_lock_irqsave(&priv->tx_lock, flags);
431
432 while (!list_empty(&priv->tx_pending)) {
433 entry = list_entry(priv->tx_pending.next,
434 struct p54s_tx_info, tx_list);
435
436 list_del_init(&entry->tx_list);
437
438 spin_unlock_irqrestore(&priv->tx_lock, flags);
439
440 dinfo = container_of((void *) entry, struct p54s_tx_info,
441 tx_list);
442 minfo = container_of((void *) dinfo, struct p54_tx_info,
443 data);
444 info = container_of((void *) minfo, struct ieee80211_tx_info,
445 rate_driver_data);
446 skb = container_of((void *) info, struct sk_buff, cb);
447
448 ret = p54spi_tx_frame(priv, skb);
449
450 if (ret < 0) {
451 p54_free_skb(priv->hw, skb);
452 return ret;
453 }
454
455 spin_lock_irqsave(&priv->tx_lock, flags);
456 }
457 spin_unlock_irqrestore(&priv->tx_lock, flags);
458 return ret;
459 }
460
p54spi_op_tx(struct ieee80211_hw * dev,struct sk_buff * skb)461 static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
462 {
463 struct p54s_priv *priv = dev->priv;
464 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
465 struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
466 struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
467 unsigned long flags;
468
469 BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
470
471 spin_lock_irqsave(&priv->tx_lock, flags);
472 list_add_tail(&di->tx_list, &priv->tx_pending);
473 spin_unlock_irqrestore(&priv->tx_lock, flags);
474
475 ieee80211_queue_work(priv->hw, &priv->work);
476 }
477
p54spi_work(struct work_struct * work)478 static void p54spi_work(struct work_struct *work)
479 {
480 struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
481 u32 ints;
482 int ret;
483
484 mutex_lock(&priv->mutex);
485
486 if (priv->fw_state == FW_STATE_OFF)
487 goto out;
488
489 ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
490
491 if (ints & SPI_HOST_INT_READY) {
492 p54spi_int_ready(priv);
493 p54spi_int_ack(priv, SPI_HOST_INT_READY);
494 }
495
496 if (priv->fw_state != FW_STATE_READY)
497 goto out;
498
499 if (ints & SPI_HOST_INT_UPDATE) {
500 p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
501 ret = p54spi_rx(priv);
502 if (ret < 0)
503 goto out;
504 }
505 if (ints & SPI_HOST_INT_SW_UPDATE) {
506 p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
507 ret = p54spi_rx(priv);
508 if (ret < 0)
509 goto out;
510 }
511
512 ret = p54spi_wq_tx(priv);
513 out:
514 mutex_unlock(&priv->mutex);
515 }
516
p54spi_op_start(struct ieee80211_hw * dev)517 static int p54spi_op_start(struct ieee80211_hw *dev)
518 {
519 struct p54s_priv *priv = dev->priv;
520 unsigned long timeout;
521 int ret = 0;
522
523 if (mutex_lock_interruptible(&priv->mutex)) {
524 ret = -EINTR;
525 goto out;
526 }
527
528 priv->fw_state = FW_STATE_BOOTING;
529
530 p54spi_power_on(priv);
531
532 ret = p54spi_upload_firmware(dev);
533 if (ret < 0) {
534 p54spi_power_off(priv);
535 goto out_unlock;
536 }
537
538 mutex_unlock(&priv->mutex);
539
540 timeout = msecs_to_jiffies(2000);
541 timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
542 timeout);
543 if (!timeout) {
544 dev_err(&priv->spi->dev, "firmware boot failed");
545 p54spi_power_off(priv);
546 ret = -1;
547 goto out;
548 }
549
550 if (mutex_lock_interruptible(&priv->mutex)) {
551 ret = -EINTR;
552 p54spi_power_off(priv);
553 goto out;
554 }
555
556 WARN_ON(priv->fw_state != FW_STATE_READY);
557
558 out_unlock:
559 mutex_unlock(&priv->mutex);
560
561 out:
562 return ret;
563 }
564
p54spi_op_stop(struct ieee80211_hw * dev)565 static void p54spi_op_stop(struct ieee80211_hw *dev)
566 {
567 struct p54s_priv *priv = dev->priv;
568 unsigned long flags;
569
570 mutex_lock(&priv->mutex);
571 WARN_ON(priv->fw_state != FW_STATE_READY);
572
573 p54spi_power_off(priv);
574 spin_lock_irqsave(&priv->tx_lock, flags);
575 INIT_LIST_HEAD(&priv->tx_pending);
576 spin_unlock_irqrestore(&priv->tx_lock, flags);
577
578 priv->fw_state = FW_STATE_OFF;
579 mutex_unlock(&priv->mutex);
580
581 cancel_work_sync(&priv->work);
582 }
583
p54spi_probe(struct spi_device * spi)584 static int p54spi_probe(struct spi_device *spi)
585 {
586 struct p54s_priv *priv = NULL;
587 struct ieee80211_hw *hw;
588 int ret = -EINVAL;
589
590 hw = p54_init_common(sizeof(*priv));
591 if (!hw) {
592 dev_err(&spi->dev, "could not alloc ieee80211_hw");
593 return -ENOMEM;
594 }
595
596 priv = hw->priv;
597 priv->hw = hw;
598 spi_set_drvdata(spi, priv);
599 priv->spi = spi;
600
601 spi->bits_per_word = 16;
602 spi->max_speed_hz = 24000000;
603
604 ret = spi_setup(spi);
605 if (ret < 0) {
606 dev_err(&priv->spi->dev, "spi_setup failed");
607 goto err_free;
608 }
609
610 ret = gpio_request(p54spi_gpio_power, "p54spi power");
611 if (ret < 0) {
612 dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
613 goto err_free;
614 }
615
616 ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
617 if (ret < 0) {
618 dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
619 goto err_free_gpio_power;
620 }
621
622 gpio_direction_output(p54spi_gpio_power, 0);
623 gpio_direction_input(p54spi_gpio_irq);
624
625 ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
626 p54spi_interrupt, 0, "p54spi",
627 priv->spi);
628 if (ret < 0) {
629 dev_err(&priv->spi->dev, "request_irq() failed");
630 goto err_free_gpio_irq;
631 }
632
633 irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
634
635 disable_irq(gpio_to_irq(p54spi_gpio_irq));
636
637 INIT_WORK(&priv->work, p54spi_work);
638 init_completion(&priv->fw_comp);
639 INIT_LIST_HEAD(&priv->tx_pending);
640 mutex_init(&priv->mutex);
641 spin_lock_init(&priv->tx_lock);
642 SET_IEEE80211_DEV(hw, &spi->dev);
643 priv->common.open = p54spi_op_start;
644 priv->common.stop = p54spi_op_stop;
645 priv->common.tx = p54spi_op_tx;
646
647 ret = p54spi_request_firmware(hw);
648 if (ret < 0)
649 goto err_free_common;
650
651 ret = p54spi_request_eeprom(hw);
652 if (ret)
653 goto err_free_common;
654
655 ret = p54_register_common(hw, &priv->spi->dev);
656 if (ret)
657 goto err_free_common;
658
659 return 0;
660
661 err_free_common:
662 free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
663 err_free_gpio_irq:
664 gpio_free(p54spi_gpio_irq);
665 err_free_gpio_power:
666 gpio_free(p54spi_gpio_power);
667 err_free:
668 p54_free_common(priv->hw);
669 return ret;
670 }
671
p54spi_remove(struct spi_device * spi)672 static int p54spi_remove(struct spi_device *spi)
673 {
674 struct p54s_priv *priv = spi_get_drvdata(spi);
675
676 p54_unregister_common(priv->hw);
677
678 free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
679
680 gpio_free(p54spi_gpio_power);
681 gpio_free(p54spi_gpio_irq);
682 release_firmware(priv->firmware);
683
684 mutex_destroy(&priv->mutex);
685
686 p54_free_common(priv->hw);
687
688 return 0;
689 }
690
691
692 static struct spi_driver p54spi_driver = {
693 .driver = {
694 .name = "p54spi",
695 },
696
697 .probe = p54spi_probe,
698 .remove = p54spi_remove,
699 };
700
701 module_spi_driver(p54spi_driver);
702
703 MODULE_LICENSE("GPL");
704 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
705 MODULE_ALIAS("spi:cx3110x");
706 MODULE_ALIAS("spi:p54spi");
707 MODULE_ALIAS("spi:stlc45xx");
708