1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Low-level parallel port routines for the Amiga built-in port
3 *
4 * Author: Joerg Dorchain <joerg@dorchain.net>
5 *
6 * This is a complete rewrite of the code, but based heaviy upon the old
7 * lp_intern. code.
8 *
9 * The built-in Amiga parallel port provides one port at a fixed address
10 * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
11 * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
12 * in hardware when the data register is accessed), and 1 input control line
13 * /ACK, able to cause an interrupt, but both not directly settable by
14 * software.
15 */
16
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/parport.h>
20 #include <linux/ioport.h>
21 #include <linux/interrupt.h>
22 #include <linux/platform_device.h>
23
24 #include <asm/setup.h>
25 #include <asm/amigahw.h>
26 #include <asm/irq.h>
27 #include <asm/io.h>
28 #include <asm/amigaints.h>
29
30 #undef DEBUG
31
amiga_write_data(struct parport * p,unsigned char data)32 static void amiga_write_data(struct parport *p, unsigned char data)
33 {
34 pr_debug("write_data %c\n", data);
35 /* Triggers also /STROBE. This behavior cannot be changed */
36 ciaa.prb = data;
37 mb();
38 }
39
amiga_read_data(struct parport * p)40 static unsigned char amiga_read_data(struct parport *p)
41 {
42 /* Triggers also /STROBE. This behavior cannot be changed */
43 return ciaa.prb;
44 }
45
control_amiga_to_pc(unsigned char control)46 static unsigned char control_amiga_to_pc(unsigned char control)
47 {
48 return PARPORT_CONTROL_SELECT |
49 PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
50 /* fake value: interrupt enable, select in, no reset,
51 no autolf, no strobe - seems to be closest the wiring diagram */
52 }
53
amiga_write_control(struct parport * p,unsigned char control)54 static void amiga_write_control(struct parport *p, unsigned char control)
55 {
56 pr_debug("write_control %02x\n", control);
57 /* No implementation possible */
58 }
59
amiga_read_control(struct parport * p)60 static unsigned char amiga_read_control( struct parport *p)
61 {
62 pr_debug("read_control\n");
63 return control_amiga_to_pc(0);
64 }
65
amiga_frob_control(struct parport * p,unsigned char mask,unsigned char val)66 static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
67 {
68 unsigned char old;
69
70 pr_debug("frob_control mask %02x, value %02x\n", mask, val);
71 old = amiga_read_control(p);
72 amiga_write_control(p, (old & ~mask) ^ val);
73 return old;
74 }
75
status_amiga_to_pc(unsigned char status)76 static unsigned char status_amiga_to_pc(unsigned char status)
77 {
78 unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
79
80 if (status & 1) /* Busy */
81 ret &= ~PARPORT_STATUS_BUSY;
82 if (status & 2) /* PaperOut */
83 ret |= PARPORT_STATUS_PAPEROUT;
84 if (status & 4) /* Selected */
85 ret |= PARPORT_STATUS_SELECT;
86 /* the rest is not connected or handled autonomously in hardware */
87
88 return ret;
89 }
90
amiga_read_status(struct parport * p)91 static unsigned char amiga_read_status(struct parport *p)
92 {
93 unsigned char status;
94
95 status = status_amiga_to_pc(ciab.pra & 7);
96 pr_debug("read_status %02x\n", status);
97 return status;
98 }
99
amiga_enable_irq(struct parport * p)100 static void amiga_enable_irq(struct parport *p)
101 {
102 enable_irq(IRQ_AMIGA_CIAA_FLG);
103 }
104
amiga_disable_irq(struct parport * p)105 static void amiga_disable_irq(struct parport *p)
106 {
107 disable_irq(IRQ_AMIGA_CIAA_FLG);
108 }
109
amiga_data_forward(struct parport * p)110 static void amiga_data_forward(struct parport *p)
111 {
112 pr_debug("forward\n");
113 ciaa.ddrb = 0xff; /* all pins output */
114 mb();
115 }
116
amiga_data_reverse(struct parport * p)117 static void amiga_data_reverse(struct parport *p)
118 {
119 pr_debug("reverse\n");
120 ciaa.ddrb = 0; /* all pins input */
121 mb();
122 }
123
amiga_init_state(struct pardevice * dev,struct parport_state * s)124 static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
125 {
126 s->u.amiga.data = 0;
127 s->u.amiga.datadir = 255;
128 s->u.amiga.status = 0;
129 s->u.amiga.statusdir = 0;
130 }
131
amiga_save_state(struct parport * p,struct parport_state * s)132 static void amiga_save_state(struct parport *p, struct parport_state *s)
133 {
134 mb();
135 s->u.amiga.data = ciaa.prb;
136 s->u.amiga.datadir = ciaa.ddrb;
137 s->u.amiga.status = ciab.pra & 7;
138 s->u.amiga.statusdir = ciab.ddra & 7;
139 mb();
140 }
141
amiga_restore_state(struct parport * p,struct parport_state * s)142 static void amiga_restore_state(struct parport *p, struct parport_state *s)
143 {
144 mb();
145 ciaa.prb = s->u.amiga.data;
146 ciaa.ddrb = s->u.amiga.datadir;
147 ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
148 ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
149 mb();
150 }
151
152 static struct parport_operations pp_amiga_ops = {
153 .write_data = amiga_write_data,
154 .read_data = amiga_read_data,
155
156 .write_control = amiga_write_control,
157 .read_control = amiga_read_control,
158 .frob_control = amiga_frob_control,
159
160 .read_status = amiga_read_status,
161
162 .enable_irq = amiga_enable_irq,
163 .disable_irq = amiga_disable_irq,
164
165 .data_forward = amiga_data_forward,
166 .data_reverse = amiga_data_reverse,
167
168 .init_state = amiga_init_state,
169 .save_state = amiga_save_state,
170 .restore_state = amiga_restore_state,
171
172 .epp_write_data = parport_ieee1284_epp_write_data,
173 .epp_read_data = parport_ieee1284_epp_read_data,
174 .epp_write_addr = parport_ieee1284_epp_write_addr,
175 .epp_read_addr = parport_ieee1284_epp_read_addr,
176
177 .ecp_write_data = parport_ieee1284_ecp_write_data,
178 .ecp_read_data = parport_ieee1284_ecp_read_data,
179 .ecp_write_addr = parport_ieee1284_ecp_write_addr,
180
181 .compat_write_data = parport_ieee1284_write_compat,
182 .nibble_read_data = parport_ieee1284_read_nibble,
183 .byte_read_data = parport_ieee1284_read_byte,
184
185 .owner = THIS_MODULE,
186 };
187
188 /* ----------- Initialisation code --------------------------------- */
189
amiga_parallel_probe(struct platform_device * pdev)190 static int __init amiga_parallel_probe(struct platform_device *pdev)
191 {
192 struct parport *p;
193 int err;
194
195 ciaa.ddrb = 0xff;
196 ciab.ddra &= 0xf8;
197 mb();
198
199 p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
200 PARPORT_DMA_NONE, &pp_amiga_ops);
201 if (!p)
202 return -EBUSY;
203
204 err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
205 p);
206 if (err)
207 goto out_irq;
208
209 pr_info("%s: Amiga built-in port using irq\n", p->name);
210 /* XXX: set operating mode */
211 parport_announce_port(p);
212
213 platform_set_drvdata(pdev, p);
214
215 return 0;
216
217 out_irq:
218 parport_put_port(p);
219 return err;
220 }
221
amiga_parallel_remove(struct platform_device * pdev)222 static int __exit amiga_parallel_remove(struct platform_device *pdev)
223 {
224 struct parport *port = platform_get_drvdata(pdev);
225
226 parport_remove_port(port);
227 if (port->irq != PARPORT_IRQ_NONE)
228 free_irq(IRQ_AMIGA_CIAA_FLG, port);
229 parport_put_port(port);
230 return 0;
231 }
232
233 static struct platform_driver amiga_parallel_driver = {
234 .remove = __exit_p(amiga_parallel_remove),
235 .driver = {
236 .name = "amiga-parallel",
237 },
238 };
239
240 module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe);
241
242 MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
243 MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
244 MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
245 MODULE_LICENSE("GPL");
246 MODULE_ALIAS("platform:amiga-parallel");
247