1 // SPDX-License-Identifier: GPL-1.0+
2 /*
3 * OHCI HCD (Host Controller Driver) for USB.
4 *
5 * Copyright (C) 2004 SAN People (Pty) Ltd.
6 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
7 *
8 * AT91 Bus Glue
9 *
10 * Based on fragments of 2.4 driver by Rick Bronson.
11 * Based on ohci-omap.c
12 *
13 * This file is licenced under the GPL.
14 */
15
16 #include <linux/clk.h>
17 #include <linux/dma-mapping.h>
18 #include <linux/gpio/consumer.h>
19 #include <linux/of_platform.h>
20 #include <linux/platform_device.h>
21 #include <linux/platform_data/atmel.h>
22 #include <linux/io.h>
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/mfd/syscon.h>
26 #include <linux/regmap.h>
27 #include <linux/usb.h>
28 #include <linux/usb/hcd.h>
29 #include <soc/at91/atmel-sfr.h>
30
31 #include "ohci.h"
32
33 #define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
34 #define at91_for_each_port(index) \
35 for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
36
37 /* interface, function and usb clocks; sometimes also an AHB clock */
38 #define hcd_to_ohci_at91_priv(h) \
39 ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
40
41 #define AT91_MAX_USBH_PORTS 3
42 struct at91_usbh_data {
43 struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS];
44 struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
45 u8 ports; /* number of ports on root hub */
46 u8 overcurrent_supported;
47 u8 overcurrent_status[AT91_MAX_USBH_PORTS];
48 u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
49 };
50
51 struct ohci_at91_priv {
52 struct clk *iclk;
53 struct clk *fclk;
54 struct clk *hclk;
55 bool clocked;
56 bool wakeup; /* Saved wake-up state for resume */
57 struct regmap *sfr_regmap;
58 };
59 /* interface and function clocks; sometimes also an AHB clock */
60
61 #define DRIVER_DESC "OHCI Atmel driver"
62
63 static const char hcd_name[] = "ohci-atmel";
64
65 static struct hc_driver __read_mostly ohci_at91_hc_driver;
66
67 static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
68 .extra_priv_size = sizeof(struct ohci_at91_priv),
69 };
70
71 /*-------------------------------------------------------------------------*/
72
at91_start_clock(struct ohci_at91_priv * ohci_at91)73 static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
74 {
75 if (ohci_at91->clocked)
76 return;
77
78 clk_set_rate(ohci_at91->fclk, 48000000);
79 clk_prepare_enable(ohci_at91->hclk);
80 clk_prepare_enable(ohci_at91->iclk);
81 clk_prepare_enable(ohci_at91->fclk);
82 ohci_at91->clocked = true;
83 }
84
at91_stop_clock(struct ohci_at91_priv * ohci_at91)85 static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
86 {
87 if (!ohci_at91->clocked)
88 return;
89
90 clk_disable_unprepare(ohci_at91->fclk);
91 clk_disable_unprepare(ohci_at91->iclk);
92 clk_disable_unprepare(ohci_at91->hclk);
93 ohci_at91->clocked = false;
94 }
95
at91_start_hc(struct platform_device * pdev)96 static void at91_start_hc(struct platform_device *pdev)
97 {
98 struct usb_hcd *hcd = platform_get_drvdata(pdev);
99 struct ohci_regs __iomem *regs = hcd->regs;
100 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
101
102 dev_dbg(&pdev->dev, "start\n");
103
104 /*
105 * Start the USB clocks.
106 */
107 at91_start_clock(ohci_at91);
108
109 /*
110 * The USB host controller must remain in reset.
111 */
112 writel(0, ®s->control);
113 }
114
at91_stop_hc(struct platform_device * pdev)115 static void at91_stop_hc(struct platform_device *pdev)
116 {
117 struct usb_hcd *hcd = platform_get_drvdata(pdev);
118 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
119
120 dev_dbg(&pdev->dev, "stop\n");
121
122 /*
123 * Put the USB host controller into reset.
124 */
125 usb_hcd_platform_shutdown(pdev);
126
127 /*
128 * Stop the USB clocks.
129 */
130 at91_stop_clock(ohci_at91);
131 }
132
133
134 /*-------------------------------------------------------------------------*/
135
136 static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
137
at91_dt_syscon_sfr(void)138 static struct regmap *at91_dt_syscon_sfr(void)
139 {
140 struct regmap *regmap;
141
142 regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
143 if (IS_ERR(regmap)) {
144 regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr");
145 if (IS_ERR(regmap))
146 regmap = NULL;
147 }
148
149 return regmap;
150 }
151
152 /* configure so an HC device and id are always provided */
153 /* always called with process context; sleeping is OK */
154
155
156 /*
157 * usb_hcd_at91_probe - initialize AT91-based HCDs
158 * Context: !in_interrupt()
159 *
160 * Allocates basic resources for this USB host controller, and
161 * then invokes the start() method for the HCD associated with it
162 * through the hotplug entry's driver_data.
163 */
usb_hcd_at91_probe(const struct hc_driver * driver,struct platform_device * pdev)164 static int usb_hcd_at91_probe(const struct hc_driver *driver,
165 struct platform_device *pdev)
166 {
167 struct at91_usbh_data *board;
168 struct ohci_hcd *ohci;
169 int retval;
170 struct usb_hcd *hcd;
171 struct ohci_at91_priv *ohci_at91;
172 struct device *dev = &pdev->dev;
173 struct resource *res;
174 int irq;
175
176 irq = platform_get_irq(pdev, 0);
177 if (irq < 0) {
178 dev_dbg(dev, "hcd probe: missing irq resource\n");
179 return irq;
180 }
181
182 hcd = usb_create_hcd(driver, dev, "at91");
183 if (!hcd)
184 return -ENOMEM;
185 ohci_at91 = hcd_to_ohci_at91_priv(hcd);
186
187 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
188 hcd->regs = devm_ioremap_resource(dev, res);
189 if (IS_ERR(hcd->regs)) {
190 retval = PTR_ERR(hcd->regs);
191 goto err;
192 }
193 hcd->rsrc_start = res->start;
194 hcd->rsrc_len = resource_size(res);
195
196 ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
197 if (IS_ERR(ohci_at91->iclk)) {
198 dev_err(dev, "failed to get ohci_clk\n");
199 retval = PTR_ERR(ohci_at91->iclk);
200 goto err;
201 }
202 ohci_at91->fclk = devm_clk_get(dev, "uhpck");
203 if (IS_ERR(ohci_at91->fclk)) {
204 dev_err(dev, "failed to get uhpck\n");
205 retval = PTR_ERR(ohci_at91->fclk);
206 goto err;
207 }
208 ohci_at91->hclk = devm_clk_get(dev, "hclk");
209 if (IS_ERR(ohci_at91->hclk)) {
210 dev_err(dev, "failed to get hclk\n");
211 retval = PTR_ERR(ohci_at91->hclk);
212 goto err;
213 }
214
215 ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
216 if (!ohci_at91->sfr_regmap)
217 dev_dbg(dev, "failed to find sfr node\n");
218
219 board = hcd->self.controller->platform_data;
220 ohci = hcd_to_ohci(hcd);
221 ohci->num_ports = board->ports;
222 at91_start_hc(pdev);
223
224 /*
225 * The RemoteWakeupConnected bit has to be set explicitly
226 * before calling ohci_run. The reset value of this bit is 0.
227 */
228 ohci->hc_control = OHCI_CTRL_RWC;
229
230 retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
231 if (retval == 0) {
232 device_wakeup_enable(hcd->self.controller);
233 return retval;
234 }
235
236 /* Error handling */
237 at91_stop_hc(pdev);
238
239 err:
240 usb_put_hcd(hcd);
241 return retval;
242 }
243
244
245 /* may be called with controller, bus, and devices active */
246
247 /*
248 * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
249 * Context: !in_interrupt()
250 *
251 * Reverses the effect of usb_hcd_at91_probe(), first invoking
252 * the HCD's stop() method. It is always called from a thread
253 * context, "rmmod" or something similar.
254 *
255 */
usb_hcd_at91_remove(struct usb_hcd * hcd,struct platform_device * pdev)256 static void usb_hcd_at91_remove(struct usb_hcd *hcd,
257 struct platform_device *pdev)
258 {
259 usb_remove_hcd(hcd);
260 at91_stop_hc(pdev);
261 usb_put_hcd(hcd);
262 }
263
264 /*-------------------------------------------------------------------------*/
ohci_at91_usb_set_power(struct at91_usbh_data * pdata,int port,int enable)265 static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
266 {
267 if (!valid_port(port))
268 return;
269
270 gpiod_set_value(pdata->vbus_pin[port], enable);
271 }
272
ohci_at91_usb_get_power(struct at91_usbh_data * pdata,int port)273 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
274 {
275 if (!valid_port(port))
276 return -EINVAL;
277
278 return gpiod_get_value(pdata->vbus_pin[port]);
279 }
280
281 /*
282 * Update the status data from the hub with the over-current indicator change.
283 */
ohci_at91_hub_status_data(struct usb_hcd * hcd,char * buf)284 static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
285 {
286 struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
287 int length = ohci_hub_status_data(hcd, buf);
288 int port;
289
290 at91_for_each_port(port) {
291 if (pdata->overcurrent_changed[port]) {
292 if (!length)
293 length = 1;
294 buf[0] |= 1 << (port + 1);
295 }
296 }
297
298 return length;
299 }
300
ohci_at91_port_suspend(struct regmap * regmap,u8 set)301 static int ohci_at91_port_suspend(struct regmap *regmap, u8 set)
302 {
303 u32 regval;
304 int ret;
305
306 if (!regmap)
307 return 0;
308
309 ret = regmap_read(regmap, AT91_SFR_OHCIICR, ®val);
310 if (ret)
311 return ret;
312
313 if (set)
314 regval |= AT91_OHCIICR_USB_SUSPEND;
315 else
316 regval &= ~AT91_OHCIICR_USB_SUSPEND;
317
318 regmap_write(regmap, AT91_SFR_OHCIICR, regval);
319
320 return 0;
321 }
322
323 /*
324 * Look at the control requests to the root hub and see if we need to override.
325 */
ohci_at91_hub_control(struct usb_hcd * hcd,u16 typeReq,u16 wValue,u16 wIndex,char * buf,u16 wLength)326 static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
327 u16 wIndex, char *buf, u16 wLength)
328 {
329 struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
330 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
331 struct usb_hub_descriptor *desc;
332 int ret = -EINVAL;
333 u32 *data = (u32 *)buf;
334
335 dev_dbg(hcd->self.controller,
336 "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
337 hcd, typeReq, wValue, wIndex, buf, wLength);
338
339 wIndex--;
340
341 switch (typeReq) {
342 case SetPortFeature:
343 switch (wValue) {
344 case USB_PORT_FEAT_POWER:
345 dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
346 if (valid_port(wIndex)) {
347 ohci_at91_usb_set_power(pdata, wIndex, 1);
348 ret = 0;
349 }
350
351 goto out;
352
353 case USB_PORT_FEAT_SUSPEND:
354 dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
355 if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
356 ohci_at91_port_suspend(ohci_at91->sfr_regmap,
357 1);
358 return 0;
359 }
360 break;
361 }
362 break;
363
364 case ClearPortFeature:
365 switch (wValue) {
366 case USB_PORT_FEAT_C_OVER_CURRENT:
367 dev_dbg(hcd->self.controller,
368 "ClearPortFeature: C_OVER_CURRENT\n");
369
370 if (valid_port(wIndex)) {
371 pdata->overcurrent_changed[wIndex] = 0;
372 pdata->overcurrent_status[wIndex] = 0;
373 }
374
375 goto out;
376
377 case USB_PORT_FEAT_OVER_CURRENT:
378 dev_dbg(hcd->self.controller,
379 "ClearPortFeature: OVER_CURRENT\n");
380
381 if (valid_port(wIndex))
382 pdata->overcurrent_status[wIndex] = 0;
383
384 goto out;
385
386 case USB_PORT_FEAT_POWER:
387 dev_dbg(hcd->self.controller,
388 "ClearPortFeature: POWER\n");
389
390 if (valid_port(wIndex)) {
391 ohci_at91_usb_set_power(pdata, wIndex, 0);
392 return 0;
393 }
394 break;
395
396 case USB_PORT_FEAT_SUSPEND:
397 dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
398 if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
399 ohci_at91_port_suspend(ohci_at91->sfr_regmap,
400 0);
401 return 0;
402 }
403 break;
404 }
405 break;
406 }
407
408 ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
409 if (ret)
410 goto out;
411
412 switch (typeReq) {
413 case GetHubDescriptor:
414
415 /* update the hub's descriptor */
416
417 desc = (struct usb_hub_descriptor *)buf;
418
419 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
420 desc->wHubCharacteristics);
421
422 /* remove the old configurations for power-switching, and
423 * over-current protection, and insert our new configuration
424 */
425
426 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
427 desc->wHubCharacteristics |=
428 cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);
429
430 if (pdata->overcurrent_supported) {
431 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
432 desc->wHubCharacteristics |=
433 cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
434 }
435
436 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
437 desc->wHubCharacteristics);
438
439 return ret;
440
441 case GetPortStatus:
442 /* check port status */
443
444 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
445
446 if (valid_port(wIndex)) {
447 if (!ohci_at91_usb_get_power(pdata, wIndex))
448 *data &= ~cpu_to_le32(RH_PS_PPS);
449
450 if (pdata->overcurrent_changed[wIndex])
451 *data |= cpu_to_le32(RH_PS_OCIC);
452
453 if (pdata->overcurrent_status[wIndex])
454 *data |= cpu_to_le32(RH_PS_POCI);
455 }
456 }
457
458 out:
459 return ret;
460 }
461
462 /*-------------------------------------------------------------------------*/
463
ohci_hcd_at91_overcurrent_irq(int irq,void * data)464 static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
465 {
466 struct platform_device *pdev = data;
467 struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
468 int val, port;
469
470 /* From the GPIO notifying the over-current situation, find
471 * out the corresponding port */
472 at91_for_each_port(port) {
473 if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq)
474 break;
475 }
476
477 if (port == AT91_MAX_USBH_PORTS) {
478 dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
479 return IRQ_HANDLED;
480 }
481
482 val = gpiod_get_value(pdata->overcurrent_pin[port]);
483
484 /* When notified of an over-current situation, disable power
485 on the corresponding port, and mark this port in
486 over-current. */
487 if (!val) {
488 ohci_at91_usb_set_power(pdata, port, 0);
489 pdata->overcurrent_status[port] = 1;
490 pdata->overcurrent_changed[port] = 1;
491 }
492
493 dev_dbg(& pdev->dev, "overcurrent situation %s\n",
494 val ? "exited" : "notified");
495
496 return IRQ_HANDLED;
497 }
498
499 static const struct of_device_id at91_ohci_dt_ids[] = {
500 { .compatible = "atmel,at91rm9200-ohci" },
501 { /* sentinel */ }
502 };
503
504 MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
505
506 /*-------------------------------------------------------------------------*/
507
ohci_hcd_at91_drv_probe(struct platform_device * pdev)508 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
509 {
510 struct device_node *np = pdev->dev.of_node;
511 struct at91_usbh_data *pdata;
512 int i;
513 int ret;
514 int err;
515 u32 ports;
516
517 /* Right now device-tree probed devices don't get dma_mask set.
518 * Since shared usb code relies on it, set it here for now.
519 * Once we have dma capability bindings this can go away.
520 */
521 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
522 if (ret)
523 return ret;
524
525 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
526 if (!pdata)
527 return -ENOMEM;
528
529 pdev->dev.platform_data = pdata;
530
531 if (!of_property_read_u32(np, "num-ports", &ports))
532 pdata->ports = ports;
533
534 at91_for_each_port(i) {
535 if (i >= pdata->ports)
536 break;
537
538 pdata->vbus_pin[i] =
539 devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
540 i, GPIOD_OUT_HIGH);
541 if (IS_ERR(pdata->vbus_pin[i])) {
542 err = PTR_ERR(pdata->vbus_pin[i]);
543 dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
544 continue;
545 }
546 }
547
548 at91_for_each_port(i) {
549 if (i >= pdata->ports)
550 break;
551
552 pdata->overcurrent_pin[i] =
553 devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
554 i, GPIOD_IN);
555 if (!pdata->overcurrent_pin[i])
556 continue;
557 if (IS_ERR(pdata->overcurrent_pin[i])) {
558 err = PTR_ERR(pdata->overcurrent_pin[i]);
559 dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
560 continue;
561 }
562
563 ret = devm_request_irq(&pdev->dev,
564 gpiod_to_irq(pdata->overcurrent_pin[i]),
565 ohci_hcd_at91_overcurrent_irq,
566 IRQF_SHARED,
567 "ohci_overcurrent", pdev);
568 if (ret)
569 dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n");
570 }
571
572 device_init_wakeup(&pdev->dev, 1);
573 return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
574 }
575
ohci_hcd_at91_drv_remove(struct platform_device * pdev)576 static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
577 {
578 struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
579 int i;
580
581 if (pdata) {
582 at91_for_each_port(i)
583 ohci_at91_usb_set_power(pdata, i, 0);
584 }
585
586 device_init_wakeup(&pdev->dev, 0);
587 usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
588 return 0;
589 }
590
591 static int __maybe_unused
ohci_hcd_at91_drv_suspend(struct device * dev)592 ohci_hcd_at91_drv_suspend(struct device *dev)
593 {
594 struct usb_hcd *hcd = dev_get_drvdata(dev);
595 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
596 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
597 int ret;
598
599 /*
600 * Disable wakeup if we are going to sleep with slow clock mode
601 * enabled.
602 */
603 ohci_at91->wakeup = device_may_wakeup(dev)
604 && !at91_suspend_entering_slow_clock();
605
606 if (ohci_at91->wakeup)
607 enable_irq_wake(hcd->irq);
608
609 ret = ohci_suspend(hcd, ohci_at91->wakeup);
610 if (ret) {
611 if (ohci_at91->wakeup)
612 disable_irq_wake(hcd->irq);
613 return ret;
614 }
615 /*
616 * The integrated transceivers seem unable to notice disconnect,
617 * reconnect, or wakeup without the 48 MHz clock active. so for
618 * correctness, always discard connection state (using reset).
619 *
620 * REVISIT: some boards will be able to turn VBUS off...
621 */
622 if (!ohci_at91->wakeup) {
623 ohci->rh_state = OHCI_RH_HALTED;
624
625 /* flush the writes */
626 (void) ohci_readl (ohci, &ohci->regs->control);
627 msleep(1);
628 ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
629 at91_stop_clock(ohci_at91);
630 } else {
631 ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
632 }
633
634 return ret;
635 }
636
637 static int __maybe_unused
ohci_hcd_at91_drv_resume(struct device * dev)638 ohci_hcd_at91_drv_resume(struct device *dev)
639 {
640 struct usb_hcd *hcd = dev_get_drvdata(dev);
641 struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
642
643 ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0);
644
645 if (ohci_at91->wakeup)
646 disable_irq_wake(hcd->irq);
647 else
648 at91_start_clock(ohci_at91);
649
650 ohci_resume(hcd, false);
651
652 return 0;
653 }
654
655 static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
656 ohci_hcd_at91_drv_resume);
657
658 static struct platform_driver ohci_hcd_at91_driver = {
659 .probe = ohci_hcd_at91_drv_probe,
660 .remove = ohci_hcd_at91_drv_remove,
661 .shutdown = usb_hcd_platform_shutdown,
662 .driver = {
663 .name = "at91_ohci",
664 .pm = &ohci_hcd_at91_pm_ops,
665 .of_match_table = at91_ohci_dt_ids,
666 },
667 };
668
ohci_at91_init(void)669 static int __init ohci_at91_init(void)
670 {
671 if (usb_disabled())
672 return -ENODEV;
673
674 pr_info("%s: " DRIVER_DESC "\n", hcd_name);
675 ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
676
677 /*
678 * The Atmel HW has some unusual quirks, which require Atmel-specific
679 * workarounds. We override certain hc_driver functions here to
680 * achieve that. We explicitly do not enhance ohci_driver_overrides to
681 * allow this more easily, since this is an unusual case, and we don't
682 * want to encourage others to override these functions by making it
683 * too easy.
684 */
685
686 ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data;
687 ohci_at91_hc_driver.hub_control = ohci_at91_hub_control;
688
689 return platform_driver_register(&ohci_hcd_at91_driver);
690 }
691 module_init(ohci_at91_init);
692
ohci_at91_cleanup(void)693 static void __exit ohci_at91_cleanup(void)
694 {
695 platform_driver_unregister(&ohci_hcd_at91_driver);
696 }
697 module_exit(ohci_at91_cleanup);
698
699 MODULE_DESCRIPTION(DRIVER_DESC);
700 MODULE_LICENSE("GPL");
701 MODULE_ALIAS("platform:at91_ohci");
702