1# HPM6300EVK 2 3 4::::{important} 5:::{note} 6Need to supplement the content of each module 7::: 8:::: 9 10## Overview 11 12version 13Board overall 14Board overall hpm6300evk 15 16- Console serial port parameters: 17 18 - Baud rate: 115200 19 - Data bits: 8 bits 20 - Check Digit: None 21 - Stop bit: 1 22 - Flow Control Bits: None 23 - Data encoding method: ASCII 24 25## DIP Switch S1 26 27- Bit 1 and 2 controls boot mode 28 29| bit[2:1] | Description | 30| -------- | ---------------------------- | 31| OFF, OFF | Boot from Quad SPI NOR flash | 32| OFF, ON | Serial boot | 33| ON, OFF | ISP | 34 35(lab_hpm6300_evk_board)= 36## Button 37 38(lab_hpm6300_evk_board_buttons)= 39| Function | Position | 40| ---- | -------- | 41|PBUTN (sw3) |Power Button, TinyUF2 Boot Button, GPIO Button | 42|WBUTN (sw1) | WAKE UP Button | 43|RESET (sw2) | Reset Button | 44 45## Pin Description 46 47- SPI Pin： 48 49| Function | Position | 50| ---- | -------- | 51| SPI3.CSN | J28[24] | 52| SPI3.SCLK | J28[23] | 53| SPI3.MISO | J28[21] | 54| SPI3.MOSI | J28[19] | 55 56- I2C Pin： 57 58| Function | Position | 59| ---- | -------- | 60| I2C0.SCL | J28[13] | 61| I2C0.SDA | J28[15] | 62 63- ACMP Pin 64 65| Function | Position | 66| ---- | -------- | 67| CMP.INN5 | J26[7] | 68| CMP.COMP_1 | J26[5] | 69 70- GPTMR Pin 71 72| Function | Position | 73| ---- | -------- | 74| GPTMR2.CAPT_2 | J28[40] | 75| GPTMR2.COMP_2 | J28[35] |