1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Ingenic JZ47xx NAND driver
4 *
5 * Copyright (c) 2015 Imagination Technologies
6 * Author: Alex Smith <alex.smith@imgtec.com>
7 */
8
9 #include <linux/delay.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/list.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_device.h>
17 #include <linux/gpio/consumer.h>
18 #include <linux/platform_device.h>
19 #include <linux/slab.h>
20 #include <linux/mtd/mtd.h>
21 #include <linux/mtd/rawnand.h>
22 #include <linux/mtd/partitions.h>
23
24 #include <linux/jz4780-nemc.h>
25
26 #include "ingenic_ecc.h"
27
28 #define DRV_NAME "ingenic-nand"
29
30 struct jz_soc_info {
31 unsigned long data_offset;
32 unsigned long addr_offset;
33 unsigned long cmd_offset;
34 const struct mtd_ooblayout_ops *oob_layout;
35 };
36
37 struct ingenic_nand_cs {
38 unsigned int bank;
39 void __iomem *base;
40 };
41
42 struct ingenic_nfc {
43 struct device *dev;
44 struct ingenic_ecc *ecc;
45 const struct jz_soc_info *soc_info;
46 struct nand_controller controller;
47 unsigned int num_banks;
48 struct list_head chips;
49 struct ingenic_nand_cs cs[];
50 };
51
52 struct ingenic_nand {
53 struct nand_chip chip;
54 struct list_head chip_list;
55
56 struct gpio_desc *busy_gpio;
57 struct gpio_desc *wp_gpio;
58 unsigned int reading: 1;
59 };
60
to_ingenic_nand(struct mtd_info * mtd)61 static inline struct ingenic_nand *to_ingenic_nand(struct mtd_info *mtd)
62 {
63 return container_of(mtd_to_nand(mtd), struct ingenic_nand, chip);
64 }
65
to_ingenic_nfc(struct nand_controller * ctrl)66 static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
67 {
68 return container_of(ctrl, struct ingenic_nfc, controller);
69 }
70
qi_lb60_ooblayout_ecc(struct mtd_info * mtd,int section,struct mtd_oob_region * oobregion)71 static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
72 struct mtd_oob_region *oobregion)
73 {
74 struct nand_chip *chip = mtd_to_nand(mtd);
75 struct nand_ecc_ctrl *ecc = &chip->ecc;
76
77 if (section || !ecc->total)
78 return -ERANGE;
79
80 oobregion->length = ecc->total;
81 oobregion->offset = 12;
82
83 return 0;
84 }
85
qi_lb60_ooblayout_free(struct mtd_info * mtd,int section,struct mtd_oob_region * oobregion)86 static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
87 struct mtd_oob_region *oobregion)
88 {
89 struct nand_chip *chip = mtd_to_nand(mtd);
90 struct nand_ecc_ctrl *ecc = &chip->ecc;
91
92 if (section)
93 return -ERANGE;
94
95 oobregion->length = mtd->oobsize - ecc->total - 12;
96 oobregion->offset = 12 + ecc->total;
97
98 return 0;
99 }
100
101 static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
102 .ecc = qi_lb60_ooblayout_ecc,
103 .free = qi_lb60_ooblayout_free,
104 };
105
jz4725b_ooblayout_ecc(struct mtd_info * mtd,int section,struct mtd_oob_region * oobregion)106 static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
107 struct mtd_oob_region *oobregion)
108 {
109 struct nand_chip *chip = mtd_to_nand(mtd);
110 struct nand_ecc_ctrl *ecc = &chip->ecc;
111
112 if (section || !ecc->total)
113 return -ERANGE;
114
115 oobregion->length = ecc->total;
116 oobregion->offset = 3;
117
118 return 0;
119 }
120
jz4725b_ooblayout_free(struct mtd_info * mtd,int section,struct mtd_oob_region * oobregion)121 static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
122 struct mtd_oob_region *oobregion)
123 {
124 struct nand_chip *chip = mtd_to_nand(mtd);
125 struct nand_ecc_ctrl *ecc = &chip->ecc;
126
127 if (section)
128 return -ERANGE;
129
130 oobregion->length = mtd->oobsize - ecc->total - 3;
131 oobregion->offset = 3 + ecc->total;
132
133 return 0;
134 }
135
136 static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
137 .ecc = jz4725b_ooblayout_ecc,
138 .free = jz4725b_ooblayout_free,
139 };
140
ingenic_nand_ecc_hwctl(struct nand_chip * chip,int mode)141 static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
142 {
143 struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
144
145 nand->reading = (mode == NAND_ECC_READ);
146 }
147
ingenic_nand_ecc_calculate(struct nand_chip * chip,const u8 * dat,u8 * ecc_code)148 static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
149 u8 *ecc_code)
150 {
151 struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
152 struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
153 struct ingenic_ecc_params params;
154
155 /*
156 * Don't need to generate the ECC when reading, the ECC engine does it
157 * for us as part of decoding/correction.
158 */
159 if (nand->reading)
160 return 0;
161
162 params.size = nand->chip.ecc.size;
163 params.bytes = nand->chip.ecc.bytes;
164 params.strength = nand->chip.ecc.strength;
165
166 return ingenic_ecc_calculate(nfc->ecc, ¶ms, dat, ecc_code);
167 }
168
ingenic_nand_ecc_correct(struct nand_chip * chip,u8 * dat,u8 * read_ecc,u8 * calc_ecc)169 static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
170 u8 *read_ecc, u8 *calc_ecc)
171 {
172 struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
173 struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
174 struct ingenic_ecc_params params;
175
176 params.size = nand->chip.ecc.size;
177 params.bytes = nand->chip.ecc.bytes;
178 params.strength = nand->chip.ecc.strength;
179
180 return ingenic_ecc_correct(nfc->ecc, ¶ms, dat, read_ecc);
181 }
182
ingenic_nand_attach_chip(struct nand_chip * chip)183 static int ingenic_nand_attach_chip(struct nand_chip *chip)
184 {
185 struct mtd_info *mtd = nand_to_mtd(chip);
186 struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
187 int eccbytes;
188
189 if (chip->ecc.strength == 4) {
190 /* JZ4740 uses 9 bytes of ECC to correct maximum 4 errors */
191 chip->ecc.bytes = 9;
192 } else {
193 chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
194 (chip->ecc.strength / 8);
195 }
196
197 switch (chip->ecc.engine_type) {
198 case NAND_ECC_ENGINE_TYPE_ON_HOST:
199 if (!nfc->ecc) {
200 dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
201 return -ENODEV;
202 }
203
204 chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
205 chip->ecc.calculate = ingenic_nand_ecc_calculate;
206 chip->ecc.correct = ingenic_nand_ecc_correct;
207 fallthrough;
208 case NAND_ECC_ENGINE_TYPE_SOFT:
209 dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
210 (nfc->ecc) ? "hardware ECC" : "software ECC",
211 chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
212 break;
213 case NAND_ECC_ENGINE_TYPE_NONE:
214 dev_info(nfc->dev, "not using ECC\n");
215 break;
216 default:
217 dev_err(nfc->dev, "ECC mode %d not supported\n",
218 chip->ecc.engine_type);
219 return -EINVAL;
220 }
221
222 /* The NAND core will generate the ECC layout for SW ECC */
223 if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
224 return 0;
225
226 /* Generate ECC layout. ECC codes are right aligned in the OOB area. */
227 eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
228
229 if (eccbytes > mtd->oobsize - 2) {
230 dev_err(nfc->dev,
231 "invalid ECC config: required %d ECC bytes, but only %d are available",
232 eccbytes, mtd->oobsize - 2);
233 return -EINVAL;
234 }
235
236 /*
237 * The generic layout for BBT markers will most likely overlap with our
238 * ECC bytes in the OOB, so move the BBT markers outside the OOB area.
239 */
240 if (chip->bbt_options & NAND_BBT_USE_FLASH)
241 chip->bbt_options |= NAND_BBT_NO_OOB;
242
243 /* For legacy reasons we use a different layout on the qi,lb60 board. */
244 if (of_machine_is_compatible("qi,lb60"))
245 mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
246 else if (nfc->soc_info->oob_layout)
247 mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
248 else
249 mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
250
251 return 0;
252 }
253
ingenic_nand_exec_instr(struct nand_chip * chip,struct ingenic_nand_cs * cs,const struct nand_op_instr * instr)254 static int ingenic_nand_exec_instr(struct nand_chip *chip,
255 struct ingenic_nand_cs *cs,
256 const struct nand_op_instr *instr)
257 {
258 struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
259 struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
260 unsigned int i;
261
262 switch (instr->type) {
263 case NAND_OP_CMD_INSTR:
264 writeb(instr->ctx.cmd.opcode,
265 cs->base + nfc->soc_info->cmd_offset);
266 return 0;
267 case NAND_OP_ADDR_INSTR:
268 for (i = 0; i < instr->ctx.addr.naddrs; i++)
269 writeb(instr->ctx.addr.addrs[i],
270 cs->base + nfc->soc_info->addr_offset);
271 return 0;
272 case NAND_OP_DATA_IN_INSTR:
273 if (instr->ctx.data.force_8bit ||
274 !(chip->options & NAND_BUSWIDTH_16))
275 ioread8_rep(cs->base + nfc->soc_info->data_offset,
276 instr->ctx.data.buf.in,
277 instr->ctx.data.len);
278 else
279 ioread16_rep(cs->base + nfc->soc_info->data_offset,
280 instr->ctx.data.buf.in,
281 instr->ctx.data.len);
282 return 0;
283 case NAND_OP_DATA_OUT_INSTR:
284 if (instr->ctx.data.force_8bit ||
285 !(chip->options & NAND_BUSWIDTH_16))
286 iowrite8_rep(cs->base + nfc->soc_info->data_offset,
287 instr->ctx.data.buf.out,
288 instr->ctx.data.len);
289 else
290 iowrite16_rep(cs->base + nfc->soc_info->data_offset,
291 instr->ctx.data.buf.out,
292 instr->ctx.data.len);
293 return 0;
294 case NAND_OP_WAITRDY_INSTR:
295 if (!nand->busy_gpio)
296 return nand_soft_waitrdy(chip,
297 instr->ctx.waitrdy.timeout_ms);
298
299 return nand_gpio_waitrdy(chip, nand->busy_gpio,
300 instr->ctx.waitrdy.timeout_ms);
301 default:
302 break;
303 }
304
305 return -EINVAL;
306 }
307
ingenic_nand_exec_op(struct nand_chip * chip,const struct nand_operation * op,bool check_only)308 static int ingenic_nand_exec_op(struct nand_chip *chip,
309 const struct nand_operation *op,
310 bool check_only)
311 {
312 struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
313 struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
314 struct ingenic_nand_cs *cs;
315 unsigned int i;
316 int ret = 0;
317
318 if (check_only)
319 return 0;
320
321 cs = &nfc->cs[op->cs];
322 jz4780_nemc_assert(nfc->dev, cs->bank, true);
323 for (i = 0; i < op->ninstrs; i++) {
324 ret = ingenic_nand_exec_instr(chip, cs, &op->instrs[i]);
325 if (ret)
326 break;
327
328 if (op->instrs[i].delay_ns)
329 ndelay(op->instrs[i].delay_ns);
330 }
331 jz4780_nemc_assert(nfc->dev, cs->bank, false);
332
333 return ret;
334 }
335
336 static const struct nand_controller_ops ingenic_nand_controller_ops = {
337 .attach_chip = ingenic_nand_attach_chip,
338 .exec_op = ingenic_nand_exec_op,
339 };
340
ingenic_nand_init_chip(struct platform_device * pdev,struct ingenic_nfc * nfc,struct device_node * np,unsigned int chipnr)341 static int ingenic_nand_init_chip(struct platform_device *pdev,
342 struct ingenic_nfc *nfc,
343 struct device_node *np,
344 unsigned int chipnr)
345 {
346 struct device *dev = &pdev->dev;
347 struct ingenic_nand *nand;
348 struct ingenic_nand_cs *cs;
349 struct nand_chip *chip;
350 struct mtd_info *mtd;
351 const __be32 *reg;
352 int ret = 0;
353
354 cs = &nfc->cs[chipnr];
355
356 reg = of_get_property(np, "reg", NULL);
357 if (!reg)
358 return -EINVAL;
359
360 cs->bank = be32_to_cpu(*reg);
361
362 jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
363
364 cs->base = devm_platform_ioremap_resource(pdev, chipnr);
365 if (IS_ERR(cs->base))
366 return PTR_ERR(cs->base);
367
368 nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
369 if (!nand)
370 return -ENOMEM;
371
372 nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
373
374 if (IS_ERR(nand->busy_gpio)) {
375 ret = PTR_ERR(nand->busy_gpio);
376 dev_err(dev, "failed to request busy GPIO: %d\n", ret);
377 return ret;
378 }
379
380 /*
381 * The rb-gpios semantics was undocumented and qi,lb60 (along with
382 * the ingenic driver) got it wrong. The active state encodes the
383 * NAND ready state, which is high level. Since there's no signal
384 * inverter on this board, it should be active-high. Let's fix that
385 * here for older DTs so we can re-use the generic nand_gpio_waitrdy()
386 * helper, and be consistent with what other drivers do.
387 */
388 if (of_machine_is_compatible("qi,lb60") &&
389 gpiod_is_active_low(nand->busy_gpio))
390 gpiod_toggle_active_low(nand->busy_gpio);
391
392 nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
393
394 if (IS_ERR(nand->wp_gpio)) {
395 ret = PTR_ERR(nand->wp_gpio);
396 dev_err(dev, "failed to request WP GPIO: %d\n", ret);
397 return ret;
398 }
399
400 chip = &nand->chip;
401 mtd = nand_to_mtd(chip);
402 mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
403 cs->bank);
404 if (!mtd->name)
405 return -ENOMEM;
406 mtd->dev.parent = dev;
407
408 chip->options = NAND_NO_SUBPAGE_WRITE;
409 chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
410 chip->controller = &nfc->controller;
411 nand_set_flash_node(chip, np);
412
413 chip->controller->ops = &ingenic_nand_controller_ops;
414 ret = nand_scan(chip, 1);
415 if (ret)
416 return ret;
417
418 ret = mtd_device_register(mtd, NULL, 0);
419 if (ret) {
420 nand_cleanup(chip);
421 return ret;
422 }
423
424 list_add_tail(&nand->chip_list, &nfc->chips);
425
426 return 0;
427 }
428
ingenic_nand_cleanup_chips(struct ingenic_nfc * nfc)429 static void ingenic_nand_cleanup_chips(struct ingenic_nfc *nfc)
430 {
431 struct ingenic_nand *ingenic_chip;
432 struct nand_chip *chip;
433 int ret;
434
435 while (!list_empty(&nfc->chips)) {
436 ingenic_chip = list_first_entry(&nfc->chips,
437 struct ingenic_nand, chip_list);
438 chip = &ingenic_chip->chip;
439 ret = mtd_device_unregister(nand_to_mtd(chip));
440 WARN_ON(ret);
441 nand_cleanup(chip);
442 list_del(&ingenic_chip->chip_list);
443 }
444 }
445
ingenic_nand_init_chips(struct ingenic_nfc * nfc,struct platform_device * pdev)446 static int ingenic_nand_init_chips(struct ingenic_nfc *nfc,
447 struct platform_device *pdev)
448 {
449 struct device *dev = &pdev->dev;
450 struct device_node *np;
451 int i = 0;
452 int ret;
453 int num_chips = of_get_child_count(dev->of_node);
454
455 if (num_chips > nfc->num_banks) {
456 dev_err(dev, "found %d chips but only %d banks\n",
457 num_chips, nfc->num_banks);
458 return -EINVAL;
459 }
460
461 for_each_child_of_node(dev->of_node, np) {
462 ret = ingenic_nand_init_chip(pdev, nfc, np, i);
463 if (ret) {
464 ingenic_nand_cleanup_chips(nfc);
465 of_node_put(np);
466 return ret;
467 }
468
469 i++;
470 }
471
472 return 0;
473 }
474
ingenic_nand_probe(struct platform_device * pdev)475 static int ingenic_nand_probe(struct platform_device *pdev)
476 {
477 struct device *dev = &pdev->dev;
478 unsigned int num_banks;
479 struct ingenic_nfc *nfc;
480 int ret;
481
482 num_banks = jz4780_nemc_num_banks(dev);
483 if (num_banks == 0) {
484 dev_err(dev, "no banks found\n");
485 return -ENODEV;
486 }
487
488 nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
489 if (!nfc)
490 return -ENOMEM;
491
492 nfc->soc_info = device_get_match_data(dev);
493 if (!nfc->soc_info)
494 return -EINVAL;
495
496 /*
497 * Check for ECC HW before we call nand_scan_ident, to prevent us from
498 * having to call it again if the ECC driver returns -EPROBE_DEFER.
499 */
500 nfc->ecc = of_ingenic_ecc_get(dev->of_node);
501 if (IS_ERR(nfc->ecc))
502 return PTR_ERR(nfc->ecc);
503
504 nfc->dev = dev;
505 nfc->num_banks = num_banks;
506
507 nand_controller_init(&nfc->controller);
508 INIT_LIST_HEAD(&nfc->chips);
509
510 ret = ingenic_nand_init_chips(nfc, pdev);
511 if (ret) {
512 if (nfc->ecc)
513 ingenic_ecc_release(nfc->ecc);
514 return ret;
515 }
516
517 platform_set_drvdata(pdev, nfc);
518 return 0;
519 }
520
ingenic_nand_remove(struct platform_device * pdev)521 static int ingenic_nand_remove(struct platform_device *pdev)
522 {
523 struct ingenic_nfc *nfc = platform_get_drvdata(pdev);
524
525 if (nfc->ecc)
526 ingenic_ecc_release(nfc->ecc);
527
528 ingenic_nand_cleanup_chips(nfc);
529
530 return 0;
531 }
532
533 static const struct jz_soc_info jz4740_soc_info = {
534 .data_offset = 0x00000000,
535 .cmd_offset = 0x00008000,
536 .addr_offset = 0x00010000,
537 };
538
539 static const struct jz_soc_info jz4725b_soc_info = {
540 .data_offset = 0x00000000,
541 .cmd_offset = 0x00008000,
542 .addr_offset = 0x00010000,
543 .oob_layout = &jz4725b_ooblayout_ops,
544 };
545
546 static const struct jz_soc_info jz4780_soc_info = {
547 .data_offset = 0x00000000,
548 .cmd_offset = 0x00400000,
549 .addr_offset = 0x00800000,
550 };
551
552 static const struct of_device_id ingenic_nand_dt_match[] = {
553 { .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
554 { .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
555 { .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
556 {},
557 };
558 MODULE_DEVICE_TABLE(of, ingenic_nand_dt_match);
559
560 static struct platform_driver ingenic_nand_driver = {
561 .probe = ingenic_nand_probe,
562 .remove = ingenic_nand_remove,
563 .driver = {
564 .name = DRV_NAME,
565 .of_match_table = of_match_ptr(ingenic_nand_dt_match),
566 },
567 };
568 module_platform_driver(ingenic_nand_driver);
569
570 MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
571 MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
572 MODULE_DESCRIPTION("Ingenic JZ47xx NAND driver");
573 MODULE_LICENSE("GPL v2");
574