| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/pinctrl/ |
| D | brcm,bcm11351-pinctrl.txt | 49 Standard, I2C, and HDMI. Each type accepts a different set of pin config
57 Optional Properties (for standard pins):
68 0: Standard(100kbps)& Fast(400kbps) mode
94 0: Standard(100kbps)& Fast(400kbps) mode
112 0: Standard(100kbps)& Fast(400kbps) mode
127 //group node defining 1 standard pin
194 "adcsync", Standard
195 "bat_rm", Standard
200 "classgpwr", Standard
201 "clk_cx8", Standard
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/v4l/ |
| D | standard.rst | 17 V4L2 defines one bit for each analog video standard currently in use
21 standard, although presenting the user a menu of supported standards is
29 standards also contain sets of one or more standard bits.
32 signals. The first enumerated standard is a set of B and G/PAL, switched
38 To query and select the standard used by the current video input or
41 *received* standard can be sensed with the
47 :ref:`v4l2_std_id <v4l2-std-id>` type (a standard set), *not* an
48 index into the standard enumeration. Drivers must implement all video
49 standard ioctls when the device has one or more video inputs or outputs.
56 video standard, or
[all …]
|
| D | vidioc-querystd.rst | 13 VIDIOC_QUERYSTD - VIDIOC_SUBDEV_QUERYSTD - Sense the video standard received by the current input
38 The hardware may be able to detect the current video standard
50 Drivers shall *not* switch the video standard
51 automatically if a new video standard is detected. Instead, drivers
54 :ref:`VIDIOC_QUERYSTD`. The reason is that a new video standard can mean
58 standard is valid they will have to stop streaming, set the new
59 standard, allocate new buffers and start streaming again.
69 Standard video timings are not supported for this input or output.
|
| D | pixfmt-intro.rst | 4 Standard Image Formats
8 necessary to have standard image data formats which both sides will
10 section is intended to be an unambiguous specification of the standard
15 to convert images to one of the standard formats when needed. But the
22 Even so, ultimately, some standard formats are needed, so the V4L2
23 specification would not be complete without well-defined standard
26 The V4L2 standard formats are mainly uncompressed formats. The pixels
|
| D | vidioc-g-std.rst | 13 …- VIDIOC_SUBDEV_G_STD - VIDIOC_SUBDEV_S_STD - Query or select the video standard of the current in…
46 To query and select the current video standard applications use the
55 does not return the actual new standard as :ref:`VIDIOC_G_STD <VIDIOC_G_STD>` does. When
57 standard the driver returns an ``EINVAL`` error code. When the standard set
59 standards. If the current input or output does not support standard
79 Standard video timings are not supported for this input or output.
|
| D | vidioc-g-dv-timings.rst | 150 - The video standard(s) this format belongs to. This will be filled
163 - The Video Identification Code according to the CEA-861 standard.
167 - The Video Identification Code according to the HDMI standard.
224 * - Timing standard
227 - The timings follow the CEA-861 Digital TV Profile standard
229 - The timings follow the VESA Discrete Monitor Timings standard
231 - The timings follow the VESA Coordinated Video Timings standard
233 - The timings follow the VESA Generalized Timings Formula standard
235 - The timings follow the SDI Timings standard.
301 Identification Code as per the CEA-861 standard.
[all …]
|
| D | vidioc-enumstd.rst | 38 To query the attributes of a video standard, especially a custom (driver
59 - Number of the video standard, set by the application.
62 - The bits in this field identify the standard as one of the common
71 - Name of the standard, a NUL-terminated ASCII string, for example:
114 - This type is a set, each bit representing another video standard
136 ``V4L2_STD_PAL_60`` is a hybrid standard with 525 lines, 60 Hz refresh
147 ``V4L2_STD_NTSC_443`` is a hybrid standard with 525 lines, 60 Hz refresh
310 Standard video timings are not supported for this input or output.
314 find the current standard returned by :ref:`VIDIOC_G_STD <VIDIOC_G_STD>`.
317 Japan uses a standard similar to M/NTSC (V4L2_STD_NTSC_M_JP).
|
| /kernel/linux/linux-5.10/drivers/media/i2c/ |
| D | tvp514x.c | 61 * struct tvp514x_std_info - Structure to store standard information
65 * @standard: v4l2 standard structure information
71 struct v4l2_standard standard; member
88 * @current_std: Current standard
231 /* Standard: STD_NTSC_MJ */
236 .standard = {
243 /* Standard: STD_PAL_BDGHIN */
249 .standard = {
257 /* Standard: need to add for additional standard */
378 * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
[all …]
|
| /kernel/linux/linux-5.10/Documentation/hwmon/ |
| D | pmbus-core.rst | 8 [from pmbus.org] The Power Management Bus (PMBus) is an open standard
11 protocol is implemented over the industry-standard SMBus serial interface and
13 conversion products. This flexible and highly versatile standard allows for
17 semiconductor companies, this open power system standard is maintained and
22 commands, and manufacturers can add as many non-standard commands as they like.
67 standard PMBus commands and virtual PMBus commands.
69 Standard PMBus commands
72 Standard PMBus commands (commands values 0x00 to 0xff) are defined in the PMBUs
78 Virtual PMBus commands are provided to enable support for non-standard
83 distinguished from standard PMBus commands (which can not have values larger
[all …]
|
| /kernel/linux/linux-5.10/include/media/davinci/ |
| D | vpbe_types.h | 24 * @name: ptr to name string of the standard, "NTSC", "PAL" etc
25 * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
39 * Structure holding timing and resolution information of a standard.
40 * Used by vpbe_device to set required non-standard timing in the
|
| /kernel/linux/linux-5.10/include/net/ |
| D | bond_3ad.h | 31 /* rx machine states(43.4.11 in the 802.3ad standard) */
42 /* periodic machine states(43.4.12 in the 802.3ad standard) */
51 /* mux machine states(43.4.13 in the 802.3ad standard) */
60 /* tx machine states(43.4.15 in the 802.3ad standard) */
66 /* churn machine states(43.4.17 in the 802.3ad standard) */
85 /* timers types(43.4.9 in the 802.3ad standard) */
96 /* Link Aggregation Control Protocol(LACP) data unit structure(43.4.2.2 in the 802.3ad standard) */
132 /* Marker Protocol Data Unit(PDU) structure(43.5.3.2 in the 802.3ad standard) */
177 /* aggregator structure(43.4.5 in the 802.3ad standard) */
205 /* port structure(43.4.6 in the 802.3ad standard) */
[all …]
|
| /kernel/linux/linux-5.10/drivers/acpi/ |
| D | acpi_pnp.c | 126 {"PNP0400"}, /* Standard LPT Printer Port */
138 {"PNP0400"}, /* Standard LPT Printer Port */
224 {"PNP0500"}, /* Generic standard PC COM port */
230 {"PNPC100"}, /* Standard 9600 bps Modem */
231 {"PNPC101"}, /* Standard 14400 bps Modem */
232 {"PNPC102"}, /* Standard 28800 bps Modem */
233 {"PNPC103"}, /* Standard Modem */
234 {"PNPC104"}, /* Standard 9600 bps Modem */
235 {"PNPC105"}, /* Standard 14400 bps Modem */
236 {"PNPC106"}, /* Standard 28800 bps Modem */
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | zynq-zc706.dts | 153 io-standard = <4>;
176 io-standard = <1>;
190 io-standard = <1>;
214 io-standard = <1>;
227 io-standard = <1>;
241 io-standard = <1>;
254 io-standard = <1>;
267 io-standard = <1>;
290 io-standard = <1>;
|
| D | zynq-zc702.dts | 203 io-standard = <1>;
226 io-standard = <4>;
249 io-standard = <1>;
267 io-standard = <1>;
291 io-standard = <1>;
304 io-standard = <1>;
318 io-standard = <1>;
331 io-standard = <1>;
344 io-standard = <1>;
367 io-standard = <1>;
|
| /kernel/linux/linux-5.10/include/linux/mmc/ |
| D | sdio_ids.h | 10 * Standard SDIO Function Interfaces
13 #define SDIO_CLASS_NONE 0x00 /* Not a SDIO standard interface */
14 #define SDIO_CLASS_UART 0x01 /* standard UART interface */
17 #define SDIO_CLASS_GPS 0x04 /* GPS standard interface */
18 #define SDIO_CLASS_CAMERA 0x05 /* Camera standard interface */
19 #define SDIO_CLASS_PHS 0x06 /* PHS standard interface */
|
| /kernel/linux/linux-5.10/Documentation/admin-guide/ |
| D | svga.rst | 28 (present in standard Linux utility packages). You can use the following values
31 NORMAL_VGA - Standard 80x25 mode available on all display adapters.
33 EXTENDED_VGA - Standard 8-pixel font mode: 80x43 on EGA, 80x50 on VGA.
55 the standard 80x25 mode.
90 the standard modes (80x25 and 80x50) followed by "special" modes (80x28 and
121 0x0100 to 0x017f - standard BIOS modes. The ID is a BIOS video mode number
129 945=132x28 for the standard Video7 BIOS)
132 by modifying one of the standard modes). Currently available:
133 0x0f00 standard 80x25, don't reset mode if already set (=FFFF)
134 0x0f01 standard with 8-point font: 80x43 on EGA, 80x50 on VGA
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/dvb/ |
| D | fe-type-t.rst | 37 - For DVB-S standard
47 - For DVB-C annex A standard
57 - For DVB-T standard
67 - For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used
89 filled with the currently standard, as selected by the last call to
|
| /kernel/linux/linux-5.10/drivers/bcma/ |
| D | README | 4 Standard AMBA drivers are platform specific, have hardcoded addresses and use
5 AMBA standard fields like CID and PID.
9 as standard AMBA device. Reading it's CID or PID can cause machine lockup.
10 2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
|
| /kernel/linux/linux-5.10/drivers/tty/serial/8250/ |
| D | 8250_pnp.c | 204 /* Generic standard PC COM port */
216 /* Standard 9600 bps Modem */
218 /* Standard 14400 bps Modem */
220 /* Standard 28800 bps Modem*/
222 /* Standard Modem*/
224 /* Standard 9600 bps Modem*/
226 /* Standard 14400 bps Modem*/
228 /* Standard 28800 bps Modem*/
230 /* Standard Modem */
232 /* Standard 9600 bps Modem */
[all …]
|
| D | Kconfig | 13 This selects whether you want to include the driver for the standard
14 serial ports. The standard answer is Y. People who might say N
17 serial mouse and don't intend to use their machine's standard serial
24 non-standard serial ports, since the configuration information will
36 modems and similar devices connecting to the standard serial ports.
60 This builds standard PNP serial support. You may be able to
82 standard 16550A serial port.
138 This builds standard PCI serial support. You may be able to
209 If you wish to use any non-standard features of the standard "dumb"
223 standard COM 1/2/3/4 ports. This may happen if you have an AST
[all …]
|
| /kernel/linux/config/ |
| D | README.md | 24 Standard system: **standard\_common\_defconfig**
30 Configuration file for the open-source development board Hi3516D V300 used in the standard system
41 │ ├── hi3516dv300_standard_defconfig # Standard-system defconfig of the open-sourc…
43 │ └── standard_common_defconfig # Common defconfig of the standard-system ker…
49 …├── hi3516dv300_standard_defconfig # Standard-system defconfig of the open-source Hi3516D V300 …
51 … └── standard_common_defconfig # Common defconfig of the standard-system kernel
|
| /kernel/linux/linux-5.10/arch/arm/crypto/ |
| D | Kconfig | 17 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
27 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
37 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
46 SHA-256 secure hash standard (DFIPS 180-2) implemented
54 SHA-256 secure hash standard (DFIPS 180-2) implemented
62 SHA-512 secure hash standard (DFIPS 180-2) implemented
|
| /kernel/linux/common_modules/newip/ |
| D | README_zh.md | 63 …//gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/kernel/kernel-standard-newip.md#newip配置指…
69 …//gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/kernel/kernel-standard-newip.md#可变长报头格式)…
73 …//gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/kernel/kernel-standard-newip.md#可变长地址格式)…
77 …//gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/kernel/kernel-standard-newip.md#newip相关接…
81 …//gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/kernel/kernel-standard-newip.md#newip收发包…
85 …//gitee.com/openharmony/docs/blob/master/zh-cn/device-dev/kernel/kernel-standard-newip.md#selinux规…
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/powerpc/fsl/ |
| D | dcsr.txt | 30 Definition: A standard property. Defines the number of cells
36 Definition: A standard property. Defines the number of cells
43 Definition: A standard property. Specifies the physical address
90 Definition: A standard property. Specifies the physical address
119 Definition: A standard property. Specifies the physical address
156 Definition: A standard property. Specifies the physical address
181 Definition: A standard property. Specifies the physical address
218 Definition: A standard property. Specifies the physical address
246 Definition: A standard property. Specifies the physical address
277 Definition: A standard property. Specifies the physical address
[all …]
|
| /kernel/linux/linux-5.10/drivers/dma/ |
| D | ste_dma40_ll.h | 38 /* Standard channel parameters - basic mode (element register) */
44 /* Standard channel parameters - basic mode (Link register) */
54 /* Standard basic channel logical mode */
68 /* Standard basic channel logical params in memory */
114 /* Standard channel parameter register offsets */
339 * physical(standard) mode.
398 * @lcsp0: Logical Channel Standard Param 0 - Src.
399 * @lcsp1: Logical Channel Standard Param 1 - Src.
400 * @lcsp2: Logical Channel Standard Param 2 - Dst.
401 * @lcsp3: Logical Channel Standard Param 3 - Dst.
|