• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1// SPDX-License-Identifier: GPL-2.0
2/*
3 *  Copyright (C) 2011 - 2014 Xilinx
4 *  Copyright (C) 2012 National Instruments Corp.
5 */
6/dts-v1/;
7#include "zynq-7000.dtsi"
8
9/ {
10	model = "Xilinx ZC706 board";
11	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
12
13	aliases {
14		ethernet0 = &gem0;
15		i2c0 = &i2c0;
16		serial0 = &uart1;
17		mmc0 = &sdhci0;
18	};
19
20	memory@0 {
21		device_type = "memory";
22		reg = <0x0 0x40000000>;
23	};
24
25	chosen {
26		bootargs = "";
27		stdout-path = "serial0:115200n8";
28	};
29
30	usb_phy0: phy0 {
31		compatible = "usb-nop-xceiv";
32		#phy-cells = <0>;
33	};
34};
35
36&clkc {
37	ps-clk-frequency = <33333333>;
38};
39
40&gem0 {
41	status = "okay";
42	phy-mode = "rgmii-id";
43	phy-handle = <&ethernet_phy>;
44	pinctrl-names = "default";
45	pinctrl-0 = <&pinctrl_gem0_default>;
46
47	ethernet_phy: ethernet-phy@7 {
48		reg = <7>;
49		device_type = "ethernet-phy";
50	};
51};
52
53&gpio0 {
54	pinctrl-names = "default";
55	pinctrl-0 = <&pinctrl_gpio0_default>;
56};
57
58&i2c0 {
59	status = "okay";
60	clock-frequency = <400000>;
61	pinctrl-names = "default";
62	pinctrl-0 = <&pinctrl_i2c0_default>;
63
64	i2c-mux@74 {
65		compatible = "nxp,pca9548";
66		#address-cells = <1>;
67		#size-cells = <0>;
68		reg = <0x74>;
69
70		i2c@0 {
71			#address-cells = <1>;
72			#size-cells = <0>;
73			reg = <0>;
74			si570: clock-generator@5d {
75				#clock-cells = <0>;
76				compatible = "silabs,si570";
77				temperature-stability = <50>;
78				reg = <0x5d>;
79				factory-fout = <156250000>;
80				clock-frequency = <148500000>;
81			};
82		};
83
84		i2c@1 {
85			#address-cells = <1>;
86			#size-cells = <0>;
87			reg = <1>;
88			adv7511: hdmi-tx@39 {
89				compatible = "adi,adv7511";
90				reg = <0x39>;
91				adi,input-depth = <8>;
92				adi,input-colorspace = "yuv422";
93				adi,input-clock = "1x";
94				adi,input-style = <3>;
95				adi,input-justification = "evenly";
96			};
97		};
98
99		i2c@2 {
100			#address-cells = <1>;
101			#size-cells = <0>;
102			reg = <2>;
103			eeprom@54 {
104				compatible = "atmel,24c08";
105				reg = <0x54>;
106			};
107		};
108
109		i2c@3 {
110			#address-cells = <1>;
111			#size-cells = <0>;
112			reg = <3>;
113			gpio@21 {
114				compatible = "ti,tca6416";
115				reg = <0x21>;
116				gpio-controller;
117				#gpio-cells = <2>;
118			};
119		};
120
121		i2c@4 {
122			#address-cells = <1>;
123			#size-cells = <0>;
124			reg = <4>;
125			rtc@51 {
126				compatible = "nxp,pcf8563";
127				reg = <0x51>;
128			};
129		};
130
131		i2c@7 {
132			#address-cells = <1>;
133			#size-cells = <0>;
134			reg = <7>;
135			ucd90120@65 {
136				compatible = "ti,ucd90120";
137				reg = <0x65>;
138			};
139		};
140	};
141};
142
143&pinctrl0 {
144	pinctrl_gem0_default: gem0-default {
145		mux {
146			function = "ethernet0";
147			groups = "ethernet0_0_grp";
148		};
149
150		conf {
151			groups = "ethernet0_0_grp";
152			slew-rate = <0>;
153			io-standard = <4>;
154		};
155
156		conf-rx {
157			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
158			bias-high-impedance;
159			low-power-disable;
160		};
161
162		conf-tx {
163			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
164			low-power-enable;
165			bias-disable;
166		};
167
168		mux-mdio {
169			function = "mdio0";
170			groups = "mdio0_0_grp";
171		};
172
173		conf-mdio {
174			groups = "mdio0_0_grp";
175			slew-rate = <0>;
176			io-standard = <1>;
177			bias-disable;
178		};
179	};
180
181	pinctrl_gpio0_default: gpio0-default {
182		mux {
183			function = "gpio0";
184			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
185		};
186
187		conf {
188			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
189			slew-rate = <0>;
190			io-standard = <1>;
191		};
192
193		conf-pull-up {
194			pins = "MIO46", "MIO47";
195			bias-pull-up;
196		};
197
198		conf-pull-none {
199			pins = "MIO7";
200			bias-disable;
201		};
202	};
203
204	pinctrl_i2c0_default: i2c0-default {
205		mux {
206			groups = "i2c0_10_grp";
207			function = "i2c0";
208		};
209
210		conf {
211			groups = "i2c0_10_grp";
212			bias-pull-up;
213			slew-rate = <0>;
214			io-standard = <1>;
215		};
216	};
217
218	pinctrl_sdhci0_default: sdhci0-default {
219		mux {
220			groups = "sdio0_2_grp";
221			function = "sdio0";
222		};
223
224		conf {
225			groups = "sdio0_2_grp";
226			slew-rate = <0>;
227			io-standard = <1>;
228			bias-disable;
229		};
230
231		mux-cd {
232			groups = "gpio0_14_grp";
233			function = "sdio0_cd";
234		};
235
236		conf-cd {
237			groups = "gpio0_14_grp";
238			bias-high-impedance;
239			bias-pull-up;
240			slew-rate = <0>;
241			io-standard = <1>;
242		};
243
244		mux-wp {
245			groups = "gpio0_15_grp";
246			function = "sdio0_wp";
247		};
248
249		conf-wp {
250			groups = "gpio0_15_grp";
251			bias-high-impedance;
252			bias-pull-up;
253			slew-rate = <0>;
254			io-standard = <1>;
255		};
256	};
257
258	pinctrl_uart1_default: uart1-default {
259		mux {
260			groups = "uart1_10_grp";
261			function = "uart1";
262		};
263
264		conf {
265			groups = "uart1_10_grp";
266			slew-rate = <0>;
267			io-standard = <1>;
268		};
269
270		conf-rx {
271			pins = "MIO49";
272			bias-high-impedance;
273		};
274
275		conf-tx {
276			pins = "MIO48";
277			bias-disable;
278		};
279	};
280
281	pinctrl_usb0_default: usb0-default {
282		mux {
283			groups = "usb0_0_grp";
284			function = "usb0";
285		};
286
287		conf {
288			groups = "usb0_0_grp";
289			slew-rate = <0>;
290			io-standard = <1>;
291		};
292
293		conf-rx {
294			pins = "MIO29", "MIO31", "MIO36";
295			bias-high-impedance;
296		};
297
298		conf-tx {
299			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
300			       "MIO35", "MIO37", "MIO38", "MIO39";
301			bias-disable;
302		};
303	};
304};
305
306&sdhci0 {
307	status = "okay";
308	pinctrl-names = "default";
309	pinctrl-0 = <&pinctrl_sdhci0_default>;
310};
311
312&uart1 {
313	status = "okay";
314	pinctrl-names = "default";
315	pinctrl-0 = <&pinctrl_uart1_default>;
316};
317
318&usb0 {
319	status = "okay";
320	dr_mode = "host";
321	usb-phy = <&usb_phy0>;
322	pinctrl-names = "default";
323	pinctrl-0 = <&pinctrl_usb0_default>;
324};
325